[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v1 4/4] hw/riscv: Load the kernel after the firmware
|
From: |
Bin Meng |
|
Subject: |
Re: [PATCH v1 4/4] hw/riscv: Load the kernel after the firmware |
|
Date: |
Fri, 9 Oct 2020 18:29:22 +0800 |
On Fri, Oct 2, 2020 at 11:55 PM Alistair Francis
<alistair.francis@wdc.com> wrote:
Please put some commit message to explain why the changes are necessary.
>
> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> ---
> include/hw/riscv/boot.h | 1 +
> hw/riscv/boot.c | 10 +++++-----
> hw/riscv/opentitan.c | 3 ++-
> hw/riscv/sifive_e.c | 3 ++-
> hw/riscv/sifive_u.c | 13 +++++++++++--
> hw/riscv/spike.c | 14 +++++++++++---
> hw/riscv/virt.c | 14 +++++++++++---
> 7 files changed, 43 insertions(+), 15 deletions(-)
>
> diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
> index 2975ed1a31..85d3227ea6 100644
> --- a/include/hw/riscv/boot.h
> +++ b/include/hw/riscv/boot.h
> @@ -34,6 +34,7 @@ target_ulong riscv_load_firmware(const char
> *firmware_filename,
> hwaddr firmware_load_addr,
> symbol_fn_t sym_cb);
> target_ulong riscv_load_kernel(const char *kernel_filename,
> + target_ulong firmware_end_addr,
> symbol_fn_t sym_cb);
> hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size,
> uint64_t kernel_entry, hwaddr *start);
> diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
> index 5dea644f47..f8e55ca16a 100644
> --- a/hw/riscv/boot.c
> +++ b/hw/riscv/boot.c
> @@ -33,10 +33,8 @@
> #include <libfdt.h>
>
> #if defined(TARGET_RISCV32)
> -# define KERNEL_BOOT_ADDRESS 0x80400000
> #define fw_dynamic_info_data(__val) cpu_to_le32(__val)
> #else
> -# define KERNEL_BOOT_ADDRESS 0x80200000
> #define fw_dynamic_info_data(__val) cpu_to_le64(__val)
> #endif
>
> @@ -123,7 +121,9 @@ target_ulong riscv_load_firmware(const char
> *firmware_filename,
> exit(1);
> }
>
> -target_ulong riscv_load_kernel(const char *kernel_filename, symbol_fn_t
> sym_cb)
> +target_ulong riscv_load_kernel(const char *kernel_filename,
> + target_ulong kernel_start_addr,
> + symbol_fn_t sym_cb)
> {
> uint64_t kernel_entry;
>
> @@ -138,9 +138,9 @@ target_ulong riscv_load_kernel(const char
> *kernel_filename, symbol_fn_t sym_cb)
> return kernel_entry;
> }
>
> - if (load_image_targphys_as(kernel_filename, KERNEL_BOOT_ADDRESS,
> + if (load_image_targphys_as(kernel_filename, kernel_start_addr,
> ram_size, NULL) > 0) {
> - return KERNEL_BOOT_ADDRESS;
> + return kernel_start_addr;
> }
>
> error_report("could not load kernel '%s'", kernel_filename);
> diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
> index 0531bd879b..cc758b78b8 100644
> --- a/hw/riscv/opentitan.c
> +++ b/hw/riscv/opentitan.c
> @@ -75,7 +75,8 @@ static void opentitan_board_init(MachineState *machine)
> }
>
> if (machine->kernel_filename) {
> - riscv_load_kernel(machine->kernel_filename, NULL);
> + riscv_load_kernel(machine->kernel_filename,
> + memmap[IBEX_DEV_RAM].base, NULL);
> }
> }
>
> diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c
> index fcfac16816..59bac4cc9a 100644
> --- a/hw/riscv/sifive_e.c
> +++ b/hw/riscv/sifive_e.c
> @@ -114,7 +114,8 @@ static void sifive_e_machine_init(MachineState *machine)
> memmap[SIFIVE_E_DEV_MROM].base,
> &address_space_memory);
>
> if (machine->kernel_filename) {
> - riscv_load_kernel(machine->kernel_filename, NULL);
> + riscv_load_kernel(machine->kernel_filename,
> + memmap[SIFIVE_E_DEV_DTIM].base, NULL);
> }
> }
>
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index 5f3ad9bc0f..08b0a3937d 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -415,6 +415,7 @@ static void sifive_u_machine_init(MachineState *machine)
> MemoryRegion *main_mem = g_new(MemoryRegion, 1);
> MemoryRegion *flash0 = g_new(MemoryRegion, 1);
> target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
> + target_ulong firmware_end_addr, kernel_start_addr;
> uint32_t start_addr_hi32 = 0x00000000;
> int i;
> uint32_t fdt_load_addr;
> @@ -474,10 +475,18 @@ static void sifive_u_machine_init(MachineState *machine)
> break;
> }
>
> - riscv_find_and_load_firmware(machine, BIOS_FILENAME, start_addr, NULL);
> + firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
> + start_addr, NULL);
>
> if (machine->kernel_filename) {
> - kernel_entry = riscv_load_kernel(machine->kernel_filename, NULL);
> + if (riscv_is_32_bit(machine)) {
> + kernel_start_addr = QEMU_ALIGN_UP(firmware_end_addr, 0x400000);
Use 4 * MiB
> + } else {
> + kernel_start_addr = QEMU_ALIGN_UP(firmware_end_addr, 0x200000);
2 * MiB
> + }
> +
> + kernel_entry = riscv_load_kernel(machine->kernel_filename,
> + kernel_start_addr, NULL);
>
> if (machine->initrd_filename) {
> hwaddr start;
> diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
> index 3fd152a035..280fb1f328 100644
> --- a/hw/riscv/spike.c
> +++ b/hw/riscv/spike.c
> @@ -195,6 +195,7 @@ static void spike_board_init(MachineState *machine)
> MemoryRegion *system_memory = get_system_memory();
> MemoryRegion *main_mem = g_new(MemoryRegion, 1);
> MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
> + target_ulong firmware_end_addr, kernel_start_addr;
> uint32_t fdt_load_addr;
> uint64_t kernel_entry;
> char *soc_name;
> @@ -261,12 +262,19 @@ static void spike_board_init(MachineState *machine)
> memory_region_add_subregion(system_memory, memmap[SPIKE_MROM].base,
> mask_rom);
>
> - riscv_find_and_load_firmware(machine, BIOS_FILENAME,
> - memmap[SPIKE_DRAM].base,
> - htif_symbol_callback);
> + firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
> + memmap[SPIKE_DRAM].base,
> + htif_symbol_callback);
>
> if (machine->kernel_filename) {
> + if (riscv_is_32_bit(machine)) {
> + kernel_start_addr = QEMU_ALIGN_UP(firmware_end_addr, 0x400000);
Ditto
It looks like this same code logic is added in several machine codes,
perhaps a new helper function in riscv/boot.c is needed to determine
the kernel start address based on the firmware end address.
> + } else {
> + kernel_start_addr = QEMU_ALIGN_UP(firmware_end_addr, 0x200000);
> + }
> +
> kernel_entry = riscv_load_kernel(machine->kernel_filename,
> + kernel_start_addr,
> htif_symbol_callback);
>
> if (machine->initrd_filename) {
> diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
> index 41bd2f38ba..bf22d28eef 100644
> --- a/hw/riscv/virt.c
> +++ b/hw/riscv/virt.c
> @@ -493,6 +493,7 @@ static void virt_machine_init(MachineState *machine)
> char *plic_hart_config, *soc_name;
> size_t plic_hart_config_len;
> target_ulong start_addr = memmap[VIRT_DRAM].base;
> + target_ulong firmware_end_addr, kernel_start_addr;
> uint32_t fdt_load_addr;
> uint64_t kernel_entry;
> DeviceState *mmio_plic, *virtio_plic, *pcie_plic;
> @@ -602,11 +603,18 @@ static void virt_machine_init(MachineState *machine)
> memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base,
> mask_rom);
>
> - riscv_find_and_load_firmware(machine, BIOS_FILENAME,
> - memmap[VIRT_DRAM].base, NULL);
> + firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
> + start_addr, NULL);
>
> if (machine->kernel_filename) {
> - kernel_entry = riscv_load_kernel(machine->kernel_filename, NULL);
> + if (riscv_is_32_bit(machine)) {
> + kernel_start_addr = QEMU_ALIGN_UP(firmware_end_addr, 0x400000);
> + } else {
> + kernel_start_addr = QEMU_ALIGN_UP(firmware_end_addr, 0x200000);
> + }
> +
> + kernel_entry = riscv_load_kernel(machine->kernel_filename,
> + kernel_start_addr, NULL);
>
> if (machine->initrd_filename) {
> hwaddr start;
Regards,
Bin
- [PATCH v1 0/4] Allow loading a no MMU kernel, Alistair Francis, 2020/10/02
- [PATCH v1 1/4] hw/riscv: sifive_u: Allow specifying the CPU, Alistair Francis, 2020/10/02
- [PATCH v1 2/4] hw/riscv: Return the end address of the loaded firmware, Alistair Francis, 2020/10/02
- [PATCH v1 3/4] hw/riscv: Add a riscv_is_32_bit() function, Alistair Francis, 2020/10/02
- [PATCH v1 4/4] hw/riscv: Load the kernel after the firmware, Alistair Francis, 2020/10/02
- Re: [PATCH v1 4/4] hw/riscv: Load the kernel after the firmware,
Bin Meng <=
- Re: [PATCH v1 0/4] Allow loading a no MMU kernel, Bin Meng, 2020/10/09