Re: [PATCH v3 00/16] hw/riscv: Add Microchip PolarFire SoC Icicle Kit board support

[Alistair Francis]

On Mon, Aug 31, 2020 at 6:40 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> From: Bin Meng <bin.meng@windriver.com>
>
> This adds support for Microchip PolarFire SoC Icicle Kit board.
> The Icicle Kit board integrates a PolarFire SoC, with one SiFive's
> E51 plus four U54 cores and many on-chip peripherals and an FPGA.
>
> For more details about Microchip PolarFire SoC, please see:
> https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga
>
> The Icicle Kit board information can be found here:
> https://www.microsemi.com/existing-parts/parts/152514
>
> Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000.
> The RISC-V CPU and HART codes has been updated to set the core's
> reset vector based on a configurable property from machine codes.
>
> The following perepherals are created as an unimplemented device:
>
> - Bus Error Uint 0/1/2/3/4
> - L2 cache controller
> - SYSREG
> - MPUCFG
> - IOSCBCFG
> - GPIO
>
> The following perepherals are emulated:
> - SiFive CLINT
> - SiFive PLIC
> - PolarFire SoC Multi-Mode UART
> - SiFive PDMA
> - Cadence eMMC/SDHCI controller
> - Cadence Gigabit Ethernet MAC
>
> The BIOS image used by this machine is hss.bin, aka Hart Software
> Services, which can be built from:
> https://github.com/polarfire-soc/hart-software-services
>
> To launch this machine:
> $ qemu-system-riscv64 -M microchip-icicle-kit -smp 5 \
>     -bios path/to/hss.bin -sd path/to/sdcard.img \
>     -nic tap,ifname=tap,script=no,model=cadence_gem \
>     -display none -serial stdio \
>     -chardev socket,id=serial1,path=serial1.sock,server,wait \
>     -serial chardev:serial1
>
> The memory is set to 1 GiB by default to match the hardware.
> A sanity check on ram size is performed in the machine init routine
> to prompt user to increase the RAM size to > 1 GiB when less than
> 1 GiB ram is detected.
>
> HSS output is on the first serial port (stdio) and U-Boot/Linux
> outputs on the 2nd serial port. OpenSBI outputs on a random serial
> port due to the lottery mechanism used during the multi-core boot.
>
> Please check the QEMU WiKi page for the target specific information:
> https://wiki.qemu.org/Documentation/Platforms/RISCV#Microchip_PolarFire_SoC_Icicle_Kit
>
> Changes in v3:
> - rebase on qemu/master
> - change MCHP_PFSOC_DMA to SIFIVE_PDMA
> - use the correct (Object *) to set the 'phy-addr' in xlnx-zynqmp.c
>
> Changes in v2:
> - change to update hw/char/meson.build
> - add impl.min_access_size and impl.max_access_size as part of
>   MemoryRegionOps and remove the allignment check
> - change to update hw/sd/meson.build
> - change the name to "generic-sdhci" when calling object_initialize_child()
> - add a container MR to simplify out-of-bounds access checks
> - do not initialize TYPE_SYSBUS_SDHCI in the SoC instance_init(),
>   instead move that to the cadence_sdhci model
> - do not access generic-sdhci's state directly,
>   instead move that to the cadence_sdhci model
> - change to update hw/dma/meson.build
> - rename the file names to sifive_pdma.[c|h]
> - update irq number to 8 per the SiFive FU540 manual
> - fix the register offset for channel 1/2/3 in the read/write ops
> - connect 8 IRQs to the PLIC
> - change "phy-addr" default value to BOARD_PHY_ADDRESS
>
> Bin Meng (16):
>   target/riscv: cpu: Add a new 'resetvec' property
>   hw/riscv: hart: Add a new 'resetvec' property
>   target/riscv: cpu: Set reset vector based on the configured property
>     value
>   hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board
>   hw/char: Add Microchip PolarFire SoC MMUART emulation
>   hw/riscv: microchip_pfsoc: Connect 5 MMUARTs
>   hw/sd: Add Cadence SDHCI emulation
>   hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an
>     SD card
>   hw/dma: Add SiFive platform DMA controller emulation
>   hw/riscv: microchip_pfsoc: Connect a DMA controller
>   hw/net: cadence_gem: Add a new 'phy-addr' property
>   hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
>   hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
>   hw/riscv: microchip_pfsoc: Hook GPIO controllers
>   hw/riscv: clint: Avoid using hard-coded timebase frequency
>   hw/riscv: sifive_u: Connect a DMA controller

Thanks!

Applied to riscv-to-apply.next

Alistair

>
>  default-configs/riscv64-softmmu.mak |   1 +
>  include/hw/char/mchp_pfsoc_mmuart.h |  61 +++++
>  include/hw/dma/sifive_pdma.h        |  57 +++++
>  include/hw/net/cadence_gem.h        |   2 +
>  include/hw/riscv/microchip_pfsoc.h  | 133 +++++++++++
>  include/hw/riscv/riscv_hart.h       |   1 +
>  include/hw/riscv/sifive_clint.h     |   4 +-
>  include/hw/riscv/sifive_u.h         |  11 +
>  include/hw/sd/cadence_sdhci.h       |  47 ++++
>  target/riscv/cpu.h                  |   7 +-
>  hw/arm/xilinx_zynq.c                |   1 +
>  hw/arm/xlnx-versal.c                |   1 +
>  hw/arm/xlnx-zynqmp.c                |   2 +
>  hw/char/mchp_pfsoc_mmuart.c         |  86 +++++++
>  hw/dma/sifive_pdma.c                | 313 ++++++++++++++++++++++++++
>  hw/net/cadence_gem.c                |   7 +-
>  hw/riscv/microchip_pfsoc.c          | 437 
> ++++++++++++++++++++++++++++++++++++
>  hw/riscv/opentitan.c                |   1 +
>  hw/riscv/riscv_hart.c               |   3 +
>  hw/riscv/sifive_clint.c             |  26 ++-
>  hw/riscv/sifive_e.c                 |   4 +-
>  hw/riscv/sifive_u.c                 |  35 ++-
>  hw/riscv/spike.c                    |   3 +-
>  hw/riscv/virt.c                     |   3 +-
>  hw/sd/cadence_sdhci.c               | 193 ++++++++++++++++
>  target/riscv/cpu.c                  |   8 +-
>  target/riscv/cpu_helper.c           |   4 +-
>  target/riscv/csr.c                  |   4 +-
>  MAINTAINERS                         |   9 +
>  hw/char/Kconfig                     |   3 +
>  hw/char/meson.build                 |   1 +
>  hw/dma/Kconfig                      |   3 +
>  hw/dma/meson.build                  |   1 +
>  hw/riscv/Kconfig                    |  10 +
>  hw/riscv/meson.build                |   1 +
>  hw/sd/Kconfig                       |   4 +
>  hw/sd/meson.build                   |   1 +
>  37 files changed, 1459 insertions(+), 29 deletions(-)
>  create mode 100644 include/hw/char/mchp_pfsoc_mmuart.h
>  create mode 100644 include/hw/dma/sifive_pdma.h
>  create mode 100644 include/hw/riscv/microchip_pfsoc.h
>  create mode 100644 include/hw/sd/cadence_sdhci.h
>  create mode 100644 hw/char/mchp_pfsoc_mmuart.c
>  create mode 100644 hw/dma/sifive_pdma.c
>  create mode 100644 hw/riscv/microchip_pfsoc.c
>  create mode 100644 hw/sd/cadence_sdhci.c
>
> --
> 2.7.4
>
>