[PATCH v2 2/2] ppc/pnv: Remove LSI on the PCIE host bridge

[Frederic Barrat]

The phb3/phb4/phb5 root ports inherit from the default PCIE root port
implementation, which requests a LSI interrupt (#INTA). On real
hardware (POWER8/POWER9/POWER10), there is no such LSI. This patch
corrects it so that it matches the hardware.

As a consequence, the device tree previously generated was bogus, as
the root bridge LSI was not properly mapped. On some
implementation (powernv9), it was leading to inconsistent interrupt
controller (xive) data. With this patch, it is now clean.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
---
 hw/pci-host/pnv_phb3.c | 1 +
 hw/pci-host/pnv_phb4.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/hw/pci-host/pnv_phb3.c b/hw/pci-host/pnv_phb3.c
index 6e9aa9d6ac..6a884833a8 100644
--- a/hw/pci-host/pnv_phb3.c
+++ b/hw/pci-host/pnv_phb3.c
@@ -1162,6 +1162,7 @@ static void pnv_phb3_root_port_realize(DeviceState *dev, 
Error **errp)
         error_propagate(errp, local_err);
         return;
     }
+    pci_config_set_interrupt_pin(pci->config, 0);
 }
 
 static void pnv_phb3_root_port_class_init(ObjectClass *klass, void *data)
diff --git a/hw/pci-host/pnv_phb4.c b/hw/pci-host/pnv_phb4.c
index 11c97e27eb..dd81e940b7 100644
--- a/hw/pci-host/pnv_phb4.c
+++ b/hw/pci-host/pnv_phb4.c
@@ -1772,6 +1772,7 @@ static void pnv_phb4_root_port_reset(DeviceState *dev)
     pci_set_word(conf + PCI_PREF_MEMORY_LIMIT, 0xfff1);
     pci_set_long(conf + PCI_PREF_BASE_UPPER32, 0x1); /* Hack */
     pci_set_long(conf + PCI_PREF_LIMIT_UPPER32, 0xffffffff);
+    pci_config_set_interrupt_pin(conf, 0);
 }
 
 static void pnv_phb4_root_port_realize(DeviceState *dev, Error **errp)
-- 
2.35.1