[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH] cpu: Add starts_halted() method
From: |
Eduardo Habkost |
Subject: |
Re: [PATCH] cpu: Add starts_halted() method |
Date: |
Wed, 8 Jul 2020 17:39:00 -0400 |
On Wed, Jul 08, 2020 at 06:45:57PM +0200, Philippe Mathieu-Daudé wrote:
> On 7/8/20 5:25 PM, Eduardo Habkost wrote:
> > On Wed, Jul 08, 2020 at 02:14:03PM +0100, Peter Maydell wrote:
> >> On Wed, 8 Jul 2020 at 12:12, David Gibson <david@gibson.dropbear.id.au>
> >> wrote:
> >>> On Wed, Jul 08, 2020 at 10:38:29AM +0200, Philippe Mathieu-Daudé wrote:
> >>>> Class boolean field certainly sounds better, but I am not sure this
> >>>> is a property of the machine. Rather the arch? So move the field
> >>>> to CPUClass? Maybe not, let's discuss :)
> >>>
> >>> It is absolutely a property of the machine. e.g. I don't think we
> >>> want this for powernv. pseries is a bit of a special case since it is
> >>> explicitly a paravirt platform. But even for emulated hardware, the
> >>> board can absolutely strap things so that cpus do or don't start
> >>> immediately.
> >>
> >> It's a property of the individual CPU, I think. One common setup
> >> for Arm systems is that the primary CPU starts powered up but
> >> the secondaries all start powered down.
> >
> > Both statements can be true. It can be a property of the
> > individual CPU (although I'm not convinced it has to), but it
> > still needs to be controlled by the machine.
>
> From what said Peter, I understand this is a property of the
> chipset. Chipsets are modelled unevenly.
>
> IIUC QEMU started with single-core CPUs.
> CPUState had same meaning for 'core' or 'cpu', 1-1 mapping.
>
> Then multicore CPUs could be easily modelled using multiple
> single-core CPUs, usually created in the machine code.
>
> Then we moved to SoC models, creating the cores in the SoC.
> Some SoCs have array of cores, eventually heterogeneous
> (see the ZynqMP). We have containers of CPUState.
>
> On an ARM-based SoC, you might have the first core started
> (as said Peter) or not.
>
> BCM2836 / BCM2837 and ZynqMP start will all ARM cores off.
> On the BCM chipsets, a DSP core will boot the ARM cores.
> On the ZynqMP, a MicroBlaze core boots them.
> As QEMU doesn't models heterogeneous architectures, we start
> modelling after the unmodelled cores booted us, so either one
> or all cores on.
>
> In this case, we narrowed down the 'start-powered-off' field
> to the SoC, which happens to be how ARM SoCs are modelled.
I was not aware of the start-powered-off property. If we make it
generic, we can just let spapr use it.
>
>
> Chipsets providing a JTAG interface can have a SRST signal,
> the "system reset". When a JTAG probe is attached, it can
> keeps the whole chipset in a reset state. This is equivalent
> to QEMU '-S' mode (single step mode).
>
>
> I don't know about pseries hardware, but if this is 'explicit
> to paravirt platform', then I expect this to be the same with
> other accelerators/architectures.
>
> If paravirtualized -> cores start off by default. Let the
> hypervisor start them. So still a property of the CPUState
> depending on the accelerator used?
I don't understand this part. Why would this depend on the
accelerator?
--
Eduardo
- Re: [PATCH] cpu: Add starts_halted() method, (continued)
- Re: [PATCH] cpu: Add starts_halted() method, Peter Maydell, 2020/07/08
- Re: [PATCH] cpu: Add starts_halted() method, Eduardo Habkost, 2020/07/08
- Re: [PATCH] cpu: Add starts_halted() method, Thiago Jung Bauermann, 2020/07/08
- Re: [PATCH] cpu: Add starts_halted() method, Thiago Jung Bauermann, 2020/07/08
- Re: [PATCH] cpu: Add starts_halted() method, Philippe Mathieu-Daudé, 2020/07/09
- Re: [PATCH] cpu: Add starts_halted() method, Thiago Jung Bauermann, 2020/07/10
- Re: [PATCH] cpu: Add starts_halted() method, Eduardo Habkost, 2020/07/10
- Message not available
- Re: [PATCH] cpu: Add starts_halted() method, Thiago Jung Bauermann, 2020/07/10
- Re: [PATCH] cpu: Add starts_halted() method, Alex Bennée, 2020/07/11
- Re: [PATCH] cpu: Add starts_halted() method, Philippe Mathieu-Daudé, 2020/07/08
- Re: [PATCH] cpu: Add starts_halted() method,
Eduardo Habkost <=
- Re: [PATCH] cpu: Add starts_halted() method, Philippe Mathieu-Daudé, 2020/07/09
- Re: [PATCH] cpu: Add starts_halted() method, Greg Kurz, 2020/07/09
- Re: [PATCH] cpu: Add starts_halted() method, Philippe Mathieu-Daudé, 2020/07/09
- Re: [PATCH] cpu: Add starts_halted() method, Greg Kurz, 2020/07/09
- Re: [PATCH] cpu: Add starts_halted() method, Philippe Mathieu-Daudé, 2020/07/09
- Re: [PATCH] cpu: Add starts_halted() method, Greg Kurz, 2020/07/09
- Re: [PATCH] cpu: Add starts_halted() method, Philippe Mathieu-Daudé, 2020/07/09
- Re: [PATCH] cpu: Add starts_halted() method, Peter Maydell, 2020/07/09