[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCH 10/19] target/ppc: Fix support for "STOP light" st
From: |
David Gibson |
Subject: |
Re: [Qemu-ppc] [PATCH 10/19] target/ppc: Fix support for "STOP light" states on POWER9 |
Date: |
Wed, 13 Feb 2019 16:05:06 +1100 |
User-agent: |
Mutt/1.10.1 (2018-07-13) |
On Mon, Jan 28, 2019 at 10:46:16AM +0100, Cédric Le Goater wrote:
> From: Benjamin Herrenschmidt <address@hidden>
>
> STOP must act differently based on PSSCR:EC on POWER9. When set, it
> acts like the P7/P8 power management instructions and wake up at 0x100
> based on the wakeup conditions in LPCR.
>
> When PSSCR:EC is clear however it will wakeup at the next instruction
> after STOP (if EE is clear) or take the corresponding interrupts (if
> EE is set).
>
> Signed-off-by: Benjamin Herrenschmidt <address@hidden>
> Signed-off-by: Cédric Le Goater <address@hidden>
Reviewed-by: David Gibson <address@hidden>
> ---
> target/ppc/cpu-qom.h | 1 +
> target/ppc/cpu.h | 12 +++++++++---
> target/ppc/excp_helper.c | 8 ++++++--
> target/ppc/translate.c | 13 ++++++++++++-
> target/ppc/translate_init.inc.c | 7 +++++++
> 5 files changed, 35 insertions(+), 6 deletions(-)
>
> diff --git a/target/ppc/cpu-qom.h b/target/ppc/cpu-qom.h
> index 4ea67692e2a6..7c54093a7122 100644
> --- a/target/ppc/cpu-qom.h
> +++ b/target/ppc/cpu-qom.h
> @@ -122,6 +122,7 @@ typedef enum {
> PPC_PM_NAP,
> PPC_PM_SLEEP,
> PPC_PM_RVWINKLE,
> + PPC_PM_STOP,
> } powerpc_pm_insn_t;
>
>
> /*****************************************************************************/
> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> index 2c22292e7f41..7ff65c804b57 100644
> --- a/target/ppc/cpu.h
> +++ b/target/ppc/cpu.h
> @@ -413,6 +413,10 @@ struct ppc_slb_t {
> #define LPCR_HVICE PPC_BIT(62) /* HV Virtualisation Int Enable */
> #define LPCR_HDICE PPC_BIT(63)
>
> +/* PSSCR bits */
> +#define PSSCR_ESL PPC_BIT(42) /* Enable State Loss */
> +#define PSSCR_EC PPC_BIT(43) /* Exit Criterion */
> +
> #define msr_sf ((env->msr >> MSR_SF) & 1)
> #define msr_isf ((env->msr >> MSR_ISF) & 1)
> #define msr_shv ((env->msr >> MSR_SHV) & 1)
> @@ -1109,9 +1113,11 @@ struct CPUPPCState {
> * instructions and SPRs are diallowed if MSR:HV is 0
> */
> bool has_hv_mode;
> - /* On P7/P8, set when in PM state, we need to handle resume
> - * in a special way (such as routing some resume causes to
> - * 0x100), so flag this here.
> +
> + /*
> + * On P7/P8/P9, set when in PM state, we need to handle resume in
> + * a special way (such as routing some resume causes to 0x100), so
> + * flag this here.
> */
> bool in_pm_state;
> #endif
> diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
> index 7c7c8d1b9dc6..97503193ef43 100644
> --- a/target/ppc/excp_helper.c
> +++ b/target/ppc/excp_helper.c
> @@ -97,7 +97,10 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int
> excp_model, int excp)
> asrr0 = -1;
> asrr1 = -1;
>
> - /* check for special resume at 0x100 from doze/nap/sleep/winkle on P7/P8
> */
> + /*
> + * check for special resume at 0x100 from doze/nap/sleep/winkle on
> + * P7/P8/P9
> + */
> if (env->in_pm_state) {
> env->in_pm_state = false;
>
> @@ -960,7 +963,8 @@ void helper_pminsn(CPUPPCState *env, powerpc_pm_insn_t
> insn)
> env->pending_interrupts &= ~(1 << PPC_INTERRUPT_HDECR);
>
> /* Condition for waking up at 0x100 */
> - env->in_pm_state = true;
> + env->in_pm_state = (insn != PPC_PM_STOP) ||
> + (env->spr[SPR_PSSCR] & PSSCR_EC);
> }
> #endif /* defined(TARGET_PPC64) */
>
> diff --git a/target/ppc/translate.c b/target/ppc/translate.c
> index 55281a8975e0..07bedbb8f1ce 100644
> --- a/target/ppc/translate.c
> +++ b/target/ppc/translate.c
> @@ -3594,7 +3594,18 @@ static void gen_nap(DisasContext *ctx)
>
> static void gen_stop(DisasContext *ctx)
> {
> - gen_nap(ctx);
> +#if defined(CONFIG_USER_ONLY)
> + GEN_PRIV;
> +#else
> + TCGv_i32 t;
> +
> + CHK_HV;
> + t = tcg_const_i32(PPC_PM_STOP);
> + gen_helper_pminsn(cpu_env, t);
> + tcg_temp_free_i32(t);
> + /* Stop translation, as the CPU is supposed to sleep from now */
> + gen_exception_nip(ctx, EXCP_HLT, ctx->base.pc_next);
> +#endif /* defined(CONFIG_USER_ONLY) */
> }
>
> static void gen_sleep(DisasContext *ctx)
> diff --git a/target/ppc/translate_init.inc.c b/target/ppc/translate_init.inc.c
> index 59e0b8676236..076d94f45755 100644
> --- a/target/ppc/translate_init.inc.c
> +++ b/target/ppc/translate_init.inc.c
> @@ -8801,9 +8801,16 @@ static bool cpu_has_work_POWER9(CPUState *cs)
> CPUPPCState *env = &cpu->env;
>
> if (cs->halted) {
> + uint64_t psscr = env->spr[SPR_PSSCR];
> +
> if (!(cs->interrupt_request & CPU_INTERRUPT_HARD)) {
> return false;
> }
> +
> + /* If EC is clear, just return true on any pending interrupt */
> + if (!(psscr & PSSCR_EC)) {
> + return true;
> + }
> /* External Exception */
> if ((env->pending_interrupts & (1u << PPC_INTERRUPT_EXT)) &&
> (env->spr[SPR_LPCR] & LPCR_EEE)) {
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-ppc] [PATCH 10/19] target/ppc: Fix support for "STOP light" states on POWER9,
David Gibson <=