qemu-ppc
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-ppc] [PATCH 01/16] hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552


From: Cédric Le Goater
Subject: Re: [Qemu-ppc] [PATCH 01/16] hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string
Date: Mon, 7 Jan 2019 07:48:02 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.3.1

On 1/4/19 6:58 PM, Philippe Mathieu-Daudé wrote:
> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>



Reviewed-by: Cédric Le Goater <address@hidden>

Thanks,

C.

> ---
>  hw/arm/aspeed.c | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 5158985482..817f9e1400 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -19,6 +19,8 @@
>  #include "hw/arm/aspeed_soc.h"
>  #include "hw/boards.h"
>  #include "hw/i2c/smbus.h"
> +#include "hw/misc/pca9552.h"
> +#include "hw/misc/tmp105.h"
>  #include "qemu/log.h"
>  #include "sysemu/block-backend.h"
>  #include "hw/loader.h"
> @@ -267,7 +269,8 @@ static void ast2500_evb_i2c_init(AspeedBoardState *bmc)
>                            eeprom_buf);
>  
>      /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
> -    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 
> 0x4d);
> +    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), TYPE_TMP105,
> +                     0x4d);
>  
>      /* The AST2500 EVB does not have an RTC. Let's pretend that one is
>       * plugged on the I2C bus header */
> @@ -288,13 +291,15 @@ static void witherspoon_bmc_i2c_init(AspeedBoardState 
> *bmc)
>      AspeedSoCState *soc = &bmc->soc;
>      uint8_t *eeprom_buf = g_malloc0(8 * 1024);
>  
> -    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 
> 0x60);
> +    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552,
> +                     0x60);
>  
>      i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 
> 0x4c);
>      i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 
> 0x4c);
>  
>      /* The Witherspoon expects a TMP275 but a TMP105 is compatible */
> -    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 
> 0x4a);
> +    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105,
> +                     0x4a);
>  
>      /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
>       * good enough */
> @@ -302,7 +307,7 @@ static void witherspoon_bmc_i2c_init(AspeedBoardState 
> *bmc)
>  
>      smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
>                            eeprom_buf);
> -    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552",
> +    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552,
>                       0x60);
>  }
>  
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]