[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-ppc] [PULL 15/24] mac_newworld: use object link to pass OpenPIC ob
From: |
David Gibson |
Subject: |
[Qemu-ppc] [PULL 15/24] mac_newworld: use object link to pass OpenPIC object to macio |
Date: |
Fri, 2 Mar 2018 17:03:41 +1100 |
From: Mark Cave-Ayland <address@hidden>
Also switch macio_newworld_realize() over to use it rather than using the
pic_mem
memory region directly.
Now that both Old World and New World macio devices no longer make use of the
pic_mem memory region directly, we can remove it.
Signed-off-by: Mark Cave-Ayland <address@hidden>
Reviewed-by: David Gibson <address@hidden>
Signed-off-by: David Gibson <address@hidden>
---
hw/misc/macio/macio.c | 14 +++++++++-----
hw/ppc/mac_newworld.c | 20 +++++++++++---------
include/hw/misc/macio/macio.h | 4 +++-
3 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/hw/misc/macio/macio.c b/hw/misc/macio/macio.c
index d4c1d190c4..e5288f1084 100644
--- a/hw/misc/macio/macio.c
+++ b/hw/misc/macio/macio.c
@@ -279,10 +279,10 @@ static void macio_newworld_realize(PCIDevice *d, Error
**errp)
sysbus_connect_irq(sysbus_dev, 0, ns->irqs[cur_irq++]);
sysbus_connect_irq(sysbus_dev, 1, ns->irqs[cur_irq++]);
- if (s->pic_mem) {
- /* OpenPIC */
- memory_region_add_subregion(&s->bar, 0x40000, s->pic_mem);
- }
+ /* OpenPIC */
+ sysbus_dev = SYS_BUS_DEVICE(ns->pic);
+ memory_region_add_subregion(&s->bar, 0x40000,
+ sysbus_mmio_get_region(sysbus_dev, 0));
/* IDE buses */
for (i = 0; i < ARRAY_SIZE(ns->ide); i++) {
@@ -311,6 +311,11 @@ static void macio_newworld_init(Object *obj)
qdev_init_gpio_out(DEVICE(obj), ns->irqs, ARRAY_SIZE(ns->irqs));
+ object_property_add_link(obj, "pic", TYPE_OPENPIC,
+ (Object **) &ns->pic,
+ qdev_prop_allow_set_link_before_realize,
+ 0, NULL);
+
for (i = 0; i < 2; i++) {
macio_init_ide(s, &ns->ide[i], sizeof(ns->ide[i]), i);
}
@@ -441,7 +446,6 @@ void macio_init(PCIDevice *d,
{
MacIOState *macio_state = MACIO(d);
- macio_state->pic_mem = pic_mem;
/* Note: this code is strongly inspirated from the corresponding code
in PearPC */
qdev_prop_set_uint64(DEVICE(&macio_state->cuda), "timebase-frequency",
diff --git a/hw/ppc/mac_newworld.c b/hw/ppc/mac_newworld.c
index 396216954e..c7960ab67a 100644
--- a/hw/ppc/mac_newworld.c
+++ b/hw/ppc/mac_newworld.c
@@ -154,7 +154,7 @@ static void ppc_core99_init(MachineState *machine)
hwaddr kernel_base, initrd_base, cmdline_base = 0;
long kernel_size, initrd_size;
PCIBus *pci_bus;
- PCIDevice *macio;
+ NewWorldMacIOState *macio;
MACIOIDEState *macio_ide;
BusState *adb_bus;
MacIONVRAMState *nvr;
@@ -166,7 +166,7 @@ static void ppc_core99_init(MachineState *machine)
void *fw_cfg;
int machine_arch;
SysBusDevice *s;
- DeviceState *dev;
+ DeviceState *dev, *pic_dev;
int *token = g_new(int, 1);
hwaddr nvram_addr = 0xFFF04000;
uint64_t tbfreq;
@@ -333,10 +333,10 @@ static void ppc_core99_init(MachineState *machine)
pic = g_new0(qemu_irq, 64);
- dev = qdev_create(NULL, TYPE_OPENPIC);
- qdev_prop_set_uint32(dev, "model", OPENPIC_MODEL_KEYLARGO);
- qdev_init_nofail(dev);
- s = SYS_BUS_DEVICE(dev);
+ pic_dev = qdev_create(NULL, TYPE_OPENPIC);
+ qdev_prop_set_uint32(pic_dev, "model", OPENPIC_MODEL_KEYLARGO);
+ qdev_init_nofail(pic_dev);
+ s = SYS_BUS_DEVICE(pic_dev);
pic_mem = s->mmio[0].memory;
k = 0;
for (i = 0; i < smp_cpus; i++) {
@@ -346,7 +346,7 @@ static void ppc_core99_init(MachineState *machine)
}
for (i = 0; i < 64; i++) {
- pic[i] = qdev_get_gpio_in(dev, i);
+ pic[i] = qdev_get_gpio_in(pic_dev, i);
}
if (PPC_INPUT(env) == PPC_FLAGS_INPUT_970) {
@@ -369,7 +369,7 @@ static void ppc_core99_init(MachineState *machine)
}
/* MacIO */
- macio = pci_create(pci_bus, -1, TYPE_NEWWORLD_MACIO);
+ macio = NEWWORLD_MACIO(pci_create(pci_bus, -1, TYPE_NEWWORLD_MACIO));
dev = DEVICE(macio);
qdev_connect_gpio_out(dev, 0, pic[0x19]); /* CUDA */
qdev_connect_gpio_out(dev, 1, pic[0x24]); /* ESCC-B */
@@ -379,7 +379,9 @@ static void ppc_core99_init(MachineState *machine)
qdev_connect_gpio_out(dev, 5, pic[0x0e]); /* IDE */
qdev_connect_gpio_out(dev, 6, pic[0x03]); /* IDE DMA */
qdev_prop_set_uint64(dev, "frequency", tbfreq);
- macio_init(macio, pic_mem);
+ object_property_set_link(OBJECT(macio), OBJECT(pic_dev), "pic",
+ &error_abort);
+ macio_init(PCI_DEVICE(macio), pic_mem);
/* We only emulate 2 out of 3 IDE controllers for now */
ide_drive_get(hd, ARRAY_SIZE(hd));
diff --git a/include/hw/misc/macio/macio.h b/include/hw/misc/macio/macio.h
index 843c114c07..4528282b36 100644
--- a/include/hw/misc/macio/macio.h
+++ b/include/hw/misc/macio/macio.h
@@ -29,6 +29,7 @@
#include "hw/intc/heathrow_pic.h"
#include "hw/misc/macio/cuda.h"
#include "hw/ppc/mac_dbdma.h"
+#include "hw/ppc/openpic.h"
#define TYPE_MACIO "macio"
#define MACIO(obj) OBJECT_CHECK(MacIOState, (obj), TYPE_MACIO)
@@ -42,7 +43,6 @@ typedef struct MacIOState {
CUDAState cuda;
DBDMAState dbdma;
ESCCState escc;
- MemoryRegion *pic_mem;
uint64_t frequency;
} MacIOState;
@@ -70,6 +70,8 @@ typedef struct NewWorldMacIOState {
/*< private >*/
MacIOState parent_obj;
/*< public >*/
+
+ OpenPICState *pic;
qemu_irq irqs[7];
MACIOIDEState ide[2];
} NewWorldMacIOState;
--
2.14.3
- [Qemu-ppc] [PULL 09/24] heathrow: convert to trace-events, (continued)
- [Qemu-ppc] [PULL 09/24] heathrow: convert to trace-events, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 21/24] ppc/spapr-caps: Convert cap-sbbc to custom spapr-cap, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 11/24] macio: move macio related structures and defines into separate macio.h file, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 12/24] mac_oldworld: use object link to pass heathrow PIC object to macio, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 06/24] macio: embed DBDMA device directly within macio, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 10/24] heathrow: change heathrow_pic_init() to return the heathrow device, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 08/24] heathrow: QOMify heathrow PIC, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 18/24] target/ppc: Check mask when setting cap_ppc_safe_indirect_branch, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 24/24] hw/ppc/spapr, e500: Use new property "stdout-path" for boot console, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 23/24] ppc/spapr-caps: Define the pseries-2.12-sxxm machine type, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 15/24] mac_newworld: use object link to pass OpenPIC object to macio,
David Gibson <=
- [Qemu-ppc] [PULL 14/24] openpic: move OpenPIC state and related definitions to openpic.h, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 20/24] ppc/spapr-caps: Convert cap-cfpc to custom spapr-cap, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 02/24] ppc440: Add emulation of plb-pcix controller found in some 440 SoCs, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 16/24] macio: move setting of CUDA timebase frequency to macio_common_realize(), David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 17/24] macio: remove macio_init() function, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 19/24] ppc/spapr-caps: Add support for custom spapr_capabilities, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 22/24] ppc/spapr-caps: Convert cap-ibs to custom spapr-cap, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 07/24] macio: move ESCC device within the macio device, David Gibson, 2018/03/02
- [Qemu-ppc] [PULL 03/24] ppc: Add aCube Sam460ex board, David Gibson, 2018/03/02
- Re: [Qemu-ppc] [Qemu-devel] [PULL 00/24] ppc-for-2.12 queue 20180302, no-reply, 2018/03/02