[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [QEMU-PPC] [PATCH V3 03/10] target/ppc/POWER9: Adapt LPCR
From: |
David Gibson |
Subject: |
Re: [Qemu-ppc] [QEMU-PPC] [PATCH V3 03/10] target/ppc/POWER9: Adapt LPCR handling for POWER9 |
Date: |
Thu, 23 Feb 2017 14:47:10 +1100 |
User-agent: |
Mutt/1.7.1 (2016-10-04) |
On Mon, Feb 20, 2017 at 06:31:46PM +1100, Balbir Singh wrote:
> On Mon, Feb 20, 2017 at 03:04:31PM +1100, Suraj Jitindar Singh wrote:
> > The logical partitioning control register controls a threads operation
> > based on the partition it is currently executing. Add new definitions and
> > update the mask used when writing to the LPCR based on the POWER9 spec.
> >
> > Signed-off-by: Suraj Jitindar Singh <address@hidden>
> > ---
> > target/ppc/cpu.h | 18 ++++++++++++++++++
> > target/ppc/mmu-hash64.c | 8 ++++++++
> > target/ppc/translate_init.c | 24 ++++++++++++++++++------
> > 3 files changed, 44 insertions(+), 6 deletions(-)
> >
> > diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> > index bb96dd5..425e79d 100644
> > --- a/target/ppc/cpu.h
> > +++ b/target/ppc/cpu.h
> > @@ -384,12 +384,19 @@ struct ppc_slb_t {
> > #define LPCR_DPFD (0x7ull << LPCR_DPFD_SHIFT)
> > #define LPCR_VRMASD_SHIFT (63 - 16)
> > #define LPCR_VRMASD (0x1full << LPCR_VRMASD_SHIFT)
> > +/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask */
> > +#define LPCR_PECE_U_SHIFT (63 - 19)
> > +#define LPCR_PECE_U_MASK (0x7ull << LPCR_PECE_U_SHIFT)
> > +#define LPCR_HVEE (1ull << (63 - 17)) /* Hypervisor Virt Exit
> > Enable */
> > #define LPCR_RMLS_SHIFT (63 - 37)
> > #define LPCR_RMLS (0xfull << LPCR_RMLS_SHIFT)
> > #define LPCR_ILE (1ull << (63 - 38))
> > #define LPCR_AIL_SHIFT (63 - 40) /* Alternate interrupt location */
> > #define LPCR_AIL (3ull << LPCR_AIL_SHIFT)
> > +#define LPCR_UPRT (1ull << (63 - 41)) /* Use Process Table */
> > +#define LPCR_EVIRT (1ull << (63 - 42)) /* Enhanced Virtualisation */
> > #define LPCR_ONL (1ull << (63 - 45))
> > +#define LPCR_LD (1ull << (63 - 46)) /* Large Decrementer */
> > #define LPCR_P7_PECE0 (1ull << (63 - 49))
> > #define LPCR_P7_PECE1 (1ull << (63 - 50))
> > #define LPCR_P7_PECE2 (1ull << (63 - 51))
> > @@ -398,11 +405,22 @@ struct ppc_slb_t {
> > #define LPCR_P8_PECE2 (1ull << (63 - 49))
> > #define LPCR_P8_PECE3 (1ull << (63 - 50))
> > #define LPCR_P8_PECE4 (1ull << (63 - 51))
> > +/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask */
> > +#define LPCR_PECE_L_SHIFT (63 - 51)
> > +#define LPCR_PECE_L_MASK (0x1full << LPCR_PECE_L_SHIFT)
> > +#define LPCR_PDEE (1ull << (63 - 47)) /* Privileged Doorbell Exit
> > EN */
> > +#define LPCR_HDEE (1ull << (63 - 48)) /* Hyperv Doorbell Exit
> > Enable */
> > +#define LPCR_EEE (1ull << (63 - 49)) /* External Exit Enable
> > */
> > +#define LPCR_DEE (1ull << (63 - 50)) /* Decrementer Exit Enable
> > */
> > +#define LPCR_OEE (1ull << (63 - 51)) /* Other Exit Enable
> > */
> > #define LPCR_MER (1ull << (63 - 52))
> > +#define LPCR_GTSE (1ull << (63 - 53)) /* Guest Translation
> > Shootdown */
> > #define LPCR_TC (1ull << (63 - 54))
> > +#define LPCR_HEIC (1ull << (63 - 59)) /* HV Extern Interrupt
> > Control */
> > #define LPCR_LPES0 (1ull << (63 - 60))
> > #define LPCR_LPES1 (1ull << (63 - 61))
> > #define LPCR_RMI (1ull << (63 - 62))
> > +#define LPCR_HVICE (1ull << (63 - 62)) /* HV Virtualisation Int
> > Enable */
> > #define LPCR_HDICE (1ull << (63 - 63))
>
> This patch is missing
>
> #define LPCR_HR (1ull << (63 - 43)) /* HV uses Radix Tree
> Translation */
>
> See arch/powerpc/include/asm/reg.h in the Linux kernel.
Suraj, if you're resending anyway, add this. It doesn't matter for
non-powernv, of course, but we might as well put the #define in to
document it.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
[Qemu-ppc] [QEMU-PPC] [PATCH V3 04/10] target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv, Suraj Jitindar Singh, 2017/02/19
[Qemu-ppc] [QEMU-PPC] [PATCH V3 05/10] target/ppc: Add patb_entry to sPAPRMachineState, Suraj Jitindar Singh, 2017/02/19
[Qemu-ppc] [QEMU-PPC] [PATCH V3 06/10] target/ppc: Don't gen an SDR1 on POWER9 and rework register creation, Suraj Jitindar Singh, 2017/02/19
[Qemu-ppc] [QEMU-PPC] [PATCH V3 08/10] target/ppc/POWER9: Add POWER9 pa-features definition, Suraj Jitindar Singh, 2017/02/19