[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [RFC PATCH 05/17] target/ppc/POWER9: Adapt LPCR handling
From: |
David Gibson |
Subject: |
Re: [Qemu-ppc] [RFC PATCH 05/17] target/ppc/POWER9: Adapt LPCR handling for POWER9 |
Date: |
Tue, 17 Jan 2017 15:37:34 +1100 |
User-agent: |
Mutt/1.7.1 (2016-10-04) |
On Tue, Jan 17, 2017 at 11:48:31AM +1100, Suraj Jitindar Singh wrote:
> On Tue, 2017-01-17 at 08:40 +1100, David Gibson wrote:
> > On Fri, Jan 13, 2017 at 05:28:11PM +1100, Suraj Jitindar Singh wrote:
> > >
> > > The logical partitioning control register controls a threads
> > > operation
> > > based on the partition it is currently executing. Add new
> > > definitions and
> > > update the mask used when writing to the LPCR based on the POWER9
> > > spec.
> > >
> > > Signed-off-by: Suraj Jitindar Singh <address@hidden>
> > > ---
> > > target/ppc/cpu.h | 20 +++++++++++++++++++-
> > > target/ppc/mmu-hash64.c | 8 ++++++++
> > > target/ppc/translate_init.c | 24 ++++++++++++++++++------
> > > 3 files changed, 45 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> > > index afb7ddb..0ab49b3 100644
> > > --- a/target/ppc/cpu.h
> > > +++ b/target/ppc/cpu.h
> > > @@ -379,15 +379,22 @@ struct ppc_slb_t {
> > > #define LPCR_ISL (1ull << (63 - 2))
> > > #define LPCR_KBV (1ull << (63 - 3))
> > > #define LPCR_DPFD_SHIFT (63 - 11)
> > > -#define LPCR_DPFD (0x3ull << LPCR_DPFD_SHIFT)
> > > +#define LPCR_DPFD (0x7ull << LPCR_DPFD_SHIFT)
> > Changing this define effectively changes the valid LPCR mask for
> > existing POWER8 and POWER7 models, which is not what you want, I
> > think.
> I should have explained this better in the commit message, this has
> always been a 3 bit field (at least in POWER7-9) so the mask has just
> always been wrong. Afaik fixing this up won't really change anything -
> it relates to data stream prefetch depth.
>
> I realise this should probably be a separate patch though, or atleast
> mentioned in the commit message.
Right, yes. Please make the bugfix a separate patch with the
explanation in the commit message.
> >
> > >
> > > #define LPCR_VRMASD_SHIFT (63 - 16)
> > > #define LPCR_VRMASD (0x1full << LPCR_VRMASD_SHIFT)
> > > +/* P9: Power-saving mode Exit Cause Enable (Upper Section) Mask */
> > > +#define LPCR_PECE_U_SHIFT (63 - 19)
> > > +#define LPCR_PECE_U_MASK (0x7ull << LPCR_PECE_U_SHIFT)
> > > +#define LPCR_HVEE (1ull << (63 - 17)) /* Hypervisor Virt
> > > Exit Enable */
> > > #define LPCR_RMLS_SHIFT (63 - 37)
> > > #define LPCR_RMLS (0xfull << LPCR_RMLS_SHIFT)
> > > #define LPCR_ILE (1ull << (63 - 38))
> > > #define LPCR_AIL_SHIFT (63 - 40) /* Alternate interrupt
> > > location */
> > > #define LPCR_AIL (3ull << LPCR_AIL_SHIFT)
> > > +#define LPCR_UPRT (1ull << (63 - 41)) /* Use Process Table
> > > */
> > > +#define LPCR_EVIRT (1ull << (63 - 42)) /* Enhanced
> > > Virtualisation */
> > > #define LPCR_ONL (1ull << (63 - 45))
> > > +#define LPCR_LD (1ull << (63 - 46)) /* Large Decrementer
> > > */
> > > #define LPCR_P7_PECE0 (1ull << (63 - 49))
> > > #define LPCR_P7_PECE1 (1ull << (63 - 50))
> > > #define LPCR_P7_PECE2 (1ull << (63 - 51))
> > > @@ -396,11 +403,22 @@ struct ppc_slb_t {
> > > #define LPCR_P8_PECE2 (1ull << (63 - 49))
> > > #define LPCR_P8_PECE3 (1ull << (63 - 50))
> > > #define LPCR_P8_PECE4 (1ull << (63 - 51))
> > > +/* P9: Power-saving mode Exit Cause Enable (Lower Section) Mask */
> > > +#define LPCR_PECE_L_SHIFT (63 - 51)
> > > +#define LPCR_PECE_L_MASK (0x1full << LPCR_PECE_L_SHIFT)
> > > +#define LPCR_PDEE (1ull << (63 - 47)) /* Privileged
> > > Doorbell Exit EN */
> > > +#define LPCR_HDEE (1ull << (63 - 48)) /* Hyperv Doorbell
> > > Exit Enable */
> > > +#define LPCR_EEE (1ull << (63 - 49)) /* External Exit
> > > Enable */
> > > +#define LPCR_DEE (1ull << (63 - 50)) /* Decrementer Exit
> > > Enable */
> > > +#define LPCR_OEE (1ull << (63 - 51)) /* Other Exit
> > > Enable */
> > > #define LPCR_MER (1ull << (63 - 52))
> > > +#define LPCR_GTSE (1ull << (63 - 53)) /* Guest Translation
> > > Shootdown */
> > > #define LPCR_TC (1ull << (63 - 54))
> > > +#define LPCR_HEIC (1ull << (63 - 59)) /* HV Extern
> > > Interrupt Control */
> > > #define LPCR_LPES0 (1ull << (63 - 60))
> > > #define LPCR_LPES1 (1ull << (63 - 61))
> > > #define LPCR_RMI (1ull << (63 - 62))
> > > +#define LPCR_HVICE (1ull << (63 - 62)) /* HV Virtualisation
> > > Int Enable */
> > > #define LPCR_HDICE (1ull << (63 - 63))
> > >
> > > #define msr_sf ((env->msr >> MSR_SF) & 1)
> > > diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> > > index fdb7a78..3a2acb8 100644
> > > --- a/target/ppc/mmu-hash64.c
> > > +++ b/target/ppc/mmu-hash64.c
> > > @@ -1050,6 +1050,14 @@ void helper_store_lpcr(CPUPPCState *env,
> > > target_ulong val)
> > > LPCR_P8_PECE2 | LPCR_P8_PECE3 |
> > > LPCR_P8_PECE4 |
> > > LPCR_MER | LPCR_TC | LPCR_LPES0 |
> > > LPCR_HDICE);
> > > break;
> > > + case POWERPC_MMU_3_00: /* P9 */
> > > + lpcr = val & (LPCR_VPM1 | LPCR_ISL | LPCR_KBV | LPCR_DPFD
> > > |
> > > + (LPCR_PECE_U_MASK & LPCR_HVEE) | LPCR_ILE |
> > > LPCR_AIL |
> > > + LPCR_UPRT | LPCR_EVIRT | LPCR_ONL |
> > > + (LPCR_PECE_L_MASK & (LPCR_PDEE | LPCR_HDEE |
> > > LPCR_EEE |
> > > + LPCR_DEE | LPCR_OEE)) | LPCR_MER | LPCR_GTSE
> > > | LPCR_TC |
> > > + LPCR_HEIC | LPCR_LPES0 | LPCR_HVICE |
> > > LPCR_HDICE);
> > > + break;
> > > default:
> > > ;
> > > }
> > > diff --git a/target/ppc/translate_init.c
> > > b/target/ppc/translate_init.c
> > > index 2402eef..a1994d3 100644
> > > --- a/target/ppc/translate_init.c
> > > +++ b/target/ppc/translate_init.c
> > > @@ -8887,12 +8887,24 @@ void cpu_ppc_set_papr(PowerPCCPU *cpu)
> > > lpcr->default_value &= ~LPCR_RMLS;
> > > lpcr->default_value |= 1ull << LPCR_RMLS_SHIFT;
> > >
> > > - /* P7 and P8 has slightly different PECE bits, mostly because
> > > P8 adds
> > > - * bit 47 and 48 which are reserved on P7. Here we set them
> > > all, which
> > > - * will work as expected for both implementations
> > > - */
> > > - lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 |
> > > LPCR_P8_PECE2 |
> > > - LPCR_P8_PECE3 | LPCR_P8_PECE4;
> > > + switch (env->mmu_model) {
> > I'm not sure of mmu_model is conceptually the right thing to switch
> > on, although I guess it will work in practice.
> Well we need something to indicate our default value, which is dictated
> by the cpu model, and given that a cpu model correlates to a mmu model
> I can't think of a better option.
Yeah, I guess it's probably reasonable. We can always change it later
if we need to.
> >
> > >
> > > + case POWERPC_MMU_3_00:
> > > + /* By default we choose legacy mode and switch to new hash
> > > or radix
> > > + * when a register process table hcall is made. So disable
> > > process
> > > + * tables and guest translation shootdown by default
> > > + */
> > > + lpcr->default_value &= ~(LPCR_UPRT | LPCR_GTSE);
> > > + lpcr->default_value |= LPCR_PDEE | LPCR_HDEE | LPCR_EEE |
> > > LPCR_DEE |
> > > + LPCR_OEE;
> > > + break;
> > > + default:
> > > + /* P7 and P8 has slightly different PECE bits, mostly
> > > because P8 adds
> > > + * bit 47 and 48 which are reserved on P7. Here we set
> > > them all, which
> > > + * will work as expected for both implementations
> > > + */
> > > + lpcr->default_value |= LPCR_P8_PECE0 | LPCR_P8_PECE1 |
> > > LPCR_P8_PECE2 |
> > > + LPCR_P8_PECE3 | LPCR_P8_PECE4;
> > > + }
> > >
> > > /* We should be followed by a CPU reset but update the active
> > > value
> > > * just in case...
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
[Qemu-ppc] [RFC PATCH 06/17] target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv, Suraj Jitindar Singh, 2017/01/13
[Qemu-ppc] [RFC PATCH 08/17] target/ppc/POWER9: Add external partition table pointer to cpu state, Suraj Jitindar Singh, 2017/01/13
[Qemu-ppc] [RFC PATCH 07/17] target/ppc/POWER9: Add partition table pointer to sPAPRMachineState, Suraj Jitindar Singh, 2017/01/13
[Qemu-ppc] [RFC PATCH 09/17] target/ppc/POWER9: Remove SDR1 register, Suraj Jitindar Singh, 2017/01/13
[Qemu-ppc] [RFC PATCH 10/17] target/ppc/POWER9: Add POWER9 mmu fault handler, Suraj Jitindar Singh, 2017/01/13