Re: [Qemu-ppc] [PATCH 6/6] prep: add IBM RS/6000 7020 (40p) machine emulation

[David Gibson]

On Thu, Dec 29, 2016 at 11:12:16PM +0100, Hervé Poussineau wrote:
> Machine supports both Open Hack'Ware and OpenBIOS.
> Open Hack'Ware is the default because OpenBIOS is currently unable to boot
> PReP boot partitions or PReP kernels.
> 
> Signed-off-by: Hervé Poussineau <address@hidden>
> ---
>  default-configs/ppc-softmmu.mak |   1 +
>  hw/ppc/prep.c                   | 231 
> ++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 232 insertions(+)
> 
> diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
> index e567658..7dd004e 100644
> --- a/default-configs/ppc-softmmu.mak
> +++ b/default-configs/ppc-softmmu.mak
> @@ -18,6 +18,7 @@ CONFIG_I82378=y
>  CONFIG_PC87312=y
>  CONFIG_MACIO=y
>  CONFIG_PCSPK=y
> +CONFIG_CS4231A=y
>  CONFIG_CUDA=y
>  CONFIG_ADB=y
>  CONFIG_MAC_NVRAM=y
> diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
> index 9fb89d3..c0373d1 100644
> --- a/hw/ppc/prep.c
> +++ b/hw/ppc/prep.c
> @@ -2,6 +2,7 @@
>   * QEMU PPC PREP hardware System Emulator
>   *
>   * Copyright (c) 2003-2007 Jocelyn Mayer
> + * Copyright (c) 2016 Hervé Poussineau
>   *
>   * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
>   * of this software and associated documentation files (the "Software"), to 
> deal
> @@ -43,6 +44,7 @@
>  #include "hw/isa/pc87312.h"
>  #include "sysemu/block-backend.h"
>  #include "sysemu/arch_init.h"
> +#include "sysemu/kvm.h"
>  #include "sysemu/qtest.h"
>  #include "exec/address-spaces.h"
>  #include "trace.h"
> @@ -54,6 +56,8 @@
>  
>  #define MAX_IDE_BUS 2
>  
> +#define CFG_ADDR 0xf0000510
> +
>  #define BIOS_SIZE (1024 * 1024)
>  #define BIOS_FILENAME "ppc_rom.bin"
>  #define KERNEL_LOAD_ADDR 0x01000000
> @@ -316,6 +320,12 @@ static uint32_t PREP_io_800_readb (void *opaque, 
> uint32_t addr)
>  
>  #define NVRAM_SIZE        0x2000
>  
> +static void fw_cfg_boot_set(void *opaque, const char *boot_device,
> +                            Error **errp)
> +{
> +    fw_cfg_add_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
> +}
> +
>  static void ppc_prep_reset(void *opaque)
>  {
>      PowerPCCPU *cpu = opaque;
> @@ -677,4 +687,225 @@ static void prep_machine_init(MachineClass *mc)
>      mc->default_boot_order = "cad";
>  }
>  
> +static int prep_set_cmos_checksum(DeviceState *dev, void *opaque)
> +{
> +    uint16_t checksum = *(uint16_t *)opaque;
> +    ISADevice *rtc;
> +
> +    rtc = ISA_DEVICE(object_dynamic_cast(OBJECT(dev), "mc146818rtc"));
> +    if (rtc) {

I don't think this is strictly safe though you'll probably get away
with it.  You need to test the result of object_dynamic_cast() against
NULL *before* you upcast it to the IsaDevice.

> +        rtc_set_memory(rtc, 0x2e, checksum & 0xff);
> +        rtc_set_memory(rtc, 0x3e, checksum & 0xff);
> +        rtc_set_memory(rtc, 0x2f, checksum >> 8);
> +        rtc_set_memory(rtc, 0x3f, checksum >> 8);
> +    }
> +    return 0;
> +}
> +
> +static void ibm_40p_init(MachineState *machine)
> +{
> +    CPUPPCState *env = NULL;
> +    uint16_t cmos_checksum;
> +    PowerPCCPU *cpu;
> +    DeviceState *dev;
> +    SysBusDevice *pcihost;
> +    Nvram *m48t59 = NULL;
> +    PCIBus *pci_bus;
> +    ISABus *isa_bus;
> +    void *fw_cfg;
> +    const char *vga_type;
> +    int i;
> +    uint32_t kernel_base = 0, initrd_base = 0;
> +    long kernel_size = 0, initrd_size = 0;
> +    char boot_device;
> +
> +    /* init CPU */
> +    if (!machine->cpu_model) {
> +        machine->cpu_model = "604";
> +    }
> +    cpu = cpu_ppc_init(machine->cpu_model);
> +    if (cpu == NULL) {
> +        fprintf(stderr, "Unable to find PowerPC CPU definition\n");
> +        exit(1);
> +    }
> +    env = &cpu->env;
> +
> +    if (env->flags & POWERPC_FLAG_RTC_CLK) {
> +        /* POWER / PowerPC 601 RTC clock frequency is 7.8125 MHz */
> +        cpu_ppc_tb_init(env, 7812500UL);
> +    } else {
> +        /* Set time-base frequency to 100 Mhz */
> +        cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
> +    }
> +    qemu_register_reset(ppc_prep_reset, cpu);
> +    if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
> +        hw_error("Only 6xx bus is supported on PREP machine\n");
> +    }
> +
> +    /* PCI host */
> +    dev = qdev_create(NULL, "raven-pcihost");
> +    if (!bios_name) {
> +        bios_name = BIOS_FILENAME;
> +    }
> +    qdev_prop_set_string(dev, "bios-name", bios_name);
> +    qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE);
> +    pcihost = SYS_BUS_DEVICE(dev);
> +    object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), 
> NULL);
> +    qdev_init_nofail(dev);
> +    pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci.0"));
> +    if (pci_bus == NULL) {
> +        fprintf(stderr, "Couldn't create PCI host controller.\n");
> +        exit(1);
> +    }
> +
> +    /* PCI -> ISA bridge */
> +    dev = DEVICE(pci_create_simple(pci_bus, PCI_DEVFN(11, 0), "i82378"));
> +    qdev_connect_gpio_out(dev, 0,
> +                          cpu->env.irq_inputs[PPC6xx_INPUT_INT]);
> +    sysbus_connect_irq(pcihost, 0, qdev_get_gpio_in(dev, 15));
> +    sysbus_connect_irq(pcihost, 1, qdev_get_gpio_in(dev, 13));
> +    sysbus_connect_irq(pcihost, 2, qdev_get_gpio_in(dev, 15));
> +    sysbus_connect_irq(pcihost, 3, qdev_get_gpio_in(dev, 13));
> +    isa_bus = ISA_BUS(qdev_get_child_bus(dev, "isa.0"));
> +
> +    /* Memory controller */
> +    dev = DEVICE(isa_create(isa_bus, "rs6000-mc"));
> +    qdev_prop_set_uint32(dev, "ram-size", machine->ram_size);
> +    qdev_init_nofail(dev);
> +
> +    /* initialize CMOS checksums */
> +    cmos_checksum = 0x6aa9;
> +    qbus_walk_children(BUS(isa_bus), prep_set_cmos_checksum, NULL, NULL, 
> NULL,
> +                       &cmos_checksum);
> +
> +    /* initialize audio subsystem */
> +    audio_init();
> +
> +    /* add some more devices */
> +    if (defaults_enabled()) {
> +        isa_create_simple(isa_bus, "i8042");
> +        m48t59 = NVRAM(isa_create_simple(isa_bus, "isa-m48t59"));
> +
> +        dev = DEVICE(isa_create(isa_bus, "cs4231a"));
> +        qdev_prop_set_uint32(dev, "iobase", 0x830);
> +        qdev_prop_set_uint32(dev, "irq", 10);
> +        qdev_init_nofail(dev);
> +
> +        dev = DEVICE(isa_create(isa_bus, "pc87312"));
> +        qdev_prop_set_uint32(dev, "config", 12);
> +        qdev_init_nofail(dev);
> +
> +        dev = DEVICE(isa_create(isa_bus, "prep-systemio"));
> +        qdev_prop_set_uint32(dev, "ibm-planar-id", 0xfc);
> +        qdev_prop_set_uint32(dev, "equipment", 0xc0);
> +        qdev_init_nofail(dev);
> +
> +        pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "lsi53c810");
> +
> +        vga_type = pci_vga_type();
> +        if (vga_type) {
> +            pci_create_simple(pci_bus, PCI_DEVFN(2, 0), pci_vga_type());
> +        }
> +
> +        for (i = 0; i < nb_nics; i++) {
> +            pci_nic_init_nofail(&nd_table[i], pci_bus, "pcnet",
> +                                i == 0 ? "3" : NULL);
> +        }
> +    }
> +
> +    /* Prepare firmware configuration for OpenBIOS */
> +    fw_cfg = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
> +
> +    if (machine->kernel_filename) {
> +        /* load kernel */
> +        kernel_base = KERNEL_LOAD_ADDR;
> +        kernel_size = load_image_targphys(machine->kernel_filename,
> +                                          kernel_base,
> +                                          machine->ram_size - kernel_base);
> +        if (kernel_size < 0) {
> +            error_report("could not load kernel '%s'",
> +                          machine->kernel_filename);
> +            exit(1);
> +        }
> +        fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
> +        fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
> +        /* load initrd */
> +        if (machine->initrd_filename) {
> +            initrd_base = INITRD_LOAD_ADDR;
> +            initrd_size = load_image_targphys(machine->initrd_filename,
> +                                              initrd_base,
> +                                              machine->ram_size - 
> initrd_base);
> +            if (initrd_size < 0) {
> +                error_report("could not load initial ram disk '%s'",
> +                             machine->initrd_filename);
> +                exit(1);
> +            }
> +            fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
> +            fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
> +        }
> +        if (machine->kernel_cmdline && *machine->kernel_cmdline) {
> +            fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
> +            pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE,
> +                             machine->kernel_cmdline);
> +            fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA,
> +                              machine->kernel_cmdline);
> +            fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
> +                           strlen(machine->kernel_cmdline) + 1);
> +        }
> +        boot_device = 'm';
> +    } else {
> +        boot_device = machine->boot_order[0];
> +    }
> +
> +    fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
> +    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)machine->ram_size);
> +    fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_PREP);
> +
> +    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
> +    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
> +    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
> +
> +    fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
> +    if (kvm_enabled()) {
> +#ifdef CONFIG_KVM
> +        uint8_t *hypercall;
> +
> +        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, kvmppc_get_tbfreq());
> +        hypercall = g_malloc(16);
> +        kvmppc_get_hypercall(env, hypercall, 16);
> +        fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
> +        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
> +#endif
> +    } else {
> +        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, NANOSECONDS_PER_SECOND);
> +    }
> +    fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, boot_device);
> +    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
> +
> +    /* Prepare firmware configuration for Open Hack'Ware */
> +    if (m48t59) {
> +        PPC_NVRAM_set_params(m48t59, NVRAM_SIZE, "PREP", ram_size,
> +                             boot_device,
> +                             kernel_base, kernel_size,
> +                             machine->kernel_cmdline,
> +                             initrd_base, initrd_size,
> +                             /* XXX: need an option to load a NVRAM image */
> +                             0,
> +                             graphic_width, graphic_height, graphic_depth);
> +    }
> +}
> +
> +static void ibm_40p_machine_init(MachineClass *mc)
> +{
> +    mc->desc = "IBM RS/6000 7020 (40p)",
> +    mc->init = ibm_40p_init;
> +    mc->max_cpus = 1;
> +    mc->pci_allow_0_address = true;
> +    mc->default_ram_size = 128 * M_BYTE;
> +    mc->block_default_type = IF_SCSI;
> +    mc->default_display = "std"; /* FIXME: should be S3 Trio */
> +    mc->default_boot_order = "c";
> +}
> +
> +DEFINE_MACHINE("40p", ibm_40p_machine_init)
>  DEFINE_MACHINE("prep", prep_machine_init)

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

signature.asc
Description: PGP signature