Re: [Qemu-ppc] [PATCH v5 11/17] ppc/xics: Add "native" XICS subclass

[David Gibson]

On Sat, Oct 22, 2016 at 11:46:44AM +0200, Cédric Le Goater wrote:
> This provides access to the MMIO based Interrupt Presentation
> Controllers (ICP) as found on a POWER8 system.
> 
> A new XICSNative class is introduced to hold the MMIO region of the
> ICPs. Each thread of the system has a subregion, indexed by its PIR
> number, holding a XIVE (External Interrupt Vector Entry). This
> provides a mean to make the link with the ICPState of the CPU.
> 
> Signed-off-by: Cédric Le Goater <address@hidden>
> ---
> 
>  Changes since v4:
> 
>  - replaced the pir_table by memory subregions using an ICP. 
>  - removed the find_icp() and cpu_setup() handlers which became
>    useless with the memory regions.
>  - removed the superfluous inits done in xics_native_initfn. This is
>    covered in the parent class init.
>  - took ownership of the patch.
> 
>  default-configs/ppc64-softmmu.mak |   3 +-
>  hw/intc/Makefile.objs             |   1 +
>  hw/intc/xics_native.c             | 304 
> ++++++++++++++++++++++++++++++++++++++
>  include/hw/ppc/pnv.h              |  19 +++
>  include/hw/ppc/xics.h             |  24 +++
>  5 files changed, 350 insertions(+), 1 deletion(-)
>  create mode 100644 hw/intc/xics_native.c
> 
> diff --git a/default-configs/ppc64-softmmu.mak 
> b/default-configs/ppc64-softmmu.mak
> index 67a9bcaa67fa..a22c93a48686 100644
> --- a/default-configs/ppc64-softmmu.mak
> +++ b/default-configs/ppc64-softmmu.mak
> @@ -48,8 +48,9 @@ CONFIG_PLATFORM_BUS=y
>  CONFIG_ETSEC=y
>  CONFIG_LIBDECNUMBER=y
>  # For pSeries
> -CONFIG_XICS=$(CONFIG_PSERIES)
> +CONFIG_XICS=$(or $(CONFIG_PSERIES),$(CONFIG_POWERNV))
>  CONFIG_XICS_SPAPR=$(CONFIG_PSERIES)
> +CONFIG_XICS_NATIVE=$(CONFIG_POWERNV)
>  CONFIG_XICS_KVM=$(and $(CONFIG_PSERIES),$(CONFIG_KVM))
>  # For PReP
>  CONFIG_MC146818RTC=y
> diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
> index 2f44a2da26e9..e44a29d75b32 100644
> --- a/hw/intc/Makefile.objs
> +++ b/hw/intc/Makefile.objs
> @@ -34,6 +34,7 @@ obj-$(CONFIG_RASPI) += bcm2835_ic.o bcm2836_control.o
>  obj-$(CONFIG_SH4) += sh_intc.o
>  obj-$(CONFIG_XICS) += xics.o
>  obj-$(CONFIG_XICS_SPAPR) += xics_spapr.o
> +obj-$(CONFIG_XICS_NATIVE) += xics_native.o
>  obj-$(CONFIG_XICS_KVM) += xics_kvm.o
>  obj-$(CONFIG_ALLWINNER_A10_PIC) += allwinner-a10-pic.o
>  obj-$(CONFIG_S390_FLIC) += s390_flic.o
> diff --git a/hw/intc/xics_native.c b/hw/intc/xics_native.c
> new file mode 100644
> index 000000000000..bbdd786aeb50
> --- /dev/null
> +++ b/hw/intc/xics_native.c
> @@ -0,0 +1,304 @@
> +/*
> + * QEMU PowerPC PowerNV machine model
> + *
> + * Native version of ICS/ICP
> + *
> + * Copyright (c) 2016, IBM Corporation.
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see 
> <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "qemu-common.h"
> +#include "cpu.h"
> +#include "hw/hw.h"
> +#include "qemu/log.h"
> +#include "qapi/error.h"
> +
> +#include "hw/ppc/fdt.h"
> +#include "hw/ppc/xics.h"
> +#include "hw/ppc/pnv.h"
> +
> +#include <libfdt.h>
> +
> +static void xics_native_reset(void *opaque)
> +{
> +    device_reset(DEVICE(opaque));
> +}
> +
> +static void xics_native_initfn(Object *obj)
> +{
> +    qemu_register_reset(xics_native_reset, obj);
> +}

I think we need to investigate why the xics native is not showing up
on the SysBus.  As a "raw" MMIO device, it really should.  If it was,
device_reset should be called without these shenannigans.

> +
> +static uint64_t xics_native_read(void *opaque, hwaddr addr, unsigned width)
> +{
> +    ICPState *icp = opaque;
> +    bool byte0 = (width == 1 && (addr & 0x3) == 0);
> +    uint64_t val = 0xffffffff;
> +
> +    switch (addr & 0xffc) {
> +    case 0: /* poll */
> +        val = icp_ipoll(icp, NULL);
> +        if (byte0) {
> +            val >>= 24;
> +        } else if (width != 4) {
> +            goto bad_access;
> +        }
> +        break;
> +    case 4: /* xirr */
> +        if (byte0) {
> +            val = icp_ipoll(icp, NULL) >> 24;
> +        } else if (width == 4) {
> +            val = icp_accept(icp);
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    case 12:
> +        if (byte0) {
> +            val = icp->mfrr;
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    case 16:
> +        if (width == 4) {
> +            val = icp->links[0];
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    case 20:
> +        if (width == 4) {
> +            val = icp->links[1];
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    case 24:
> +        if (width == 4) {
> +            val = icp->links[2];
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    default:
> +bad_access:
> +        qemu_log_mask(LOG_GUEST_ERROR, "XICS: Bad ICP access 0x%"
> +                      HWADDR_PRIx"/%d\n", addr, width);
> +    }
> +
> +    return val;
> +}
> +
> +static void xics_native_write(void *opaque, hwaddr addr, uint64_t val,
> +                              unsigned width)
> +{
> +    ICPState *icp = opaque;
> +    bool byte0 = (width == 1 && (addr & 0x3) == 0);
> +
> +    switch (addr & 0xffc) {
> +    case 4: /* xirr */
> +        if (byte0) {
> +            icp_set_cppr(icp, val);
> +        } else if (width == 4) {
> +            icp_eoi(icp, val);
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    case 12:
> +        if (byte0) {
> +            icp_set_mfrr(icp, val);
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    case 16:
> +        if (width == 4) {
> +            icp->links[0] = val;
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    case 20:
> +        if (width == 4) {
> +            icp->links[1] = val;
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    case 24:
> +        if (width == 4) {
> +            icp->links[2] = val;
> +        } else {
> +            goto bad_access;
> +        }
> +        break;
> +    default:
> +bad_access:
> +        qemu_log_mask(LOG_GUEST_ERROR, "XICS: Bad ICP access 0x%"
> +                      HWADDR_PRIx"/%d\n", addr, width);
> +    }
> +}
> +
> +static const MemoryRegionOps xics_native_ops = {
> +    .read = xics_native_read,
> +    .write = xics_native_write,
> +    .valid.min_access_size = 1,
> +    .valid.max_access_size = 4,
> +    .impl.min_access_size = 1,
> +    .impl.max_access_size = 4,
> +    .endianness = DEVICE_BIG_ENDIAN,
> +};
> +
> +static uint64_t xics_native_default_read(void *opaque, hwaddr addr,
> +                                         unsigned width)
> +{
> +    qemu_log_mask(LOG_GUEST_ERROR, "XICS: Bad ICP access 0x%"
> +                  HWADDR_PRIx"/%d\n", addr, width);
> +    return 0xffffffffffffffffull;
> +}
> +
> +static void xics_native_default_write(void *opaque, hwaddr addr, uint64_t 
> val,
> +                                      unsigned width)
> +{
> +    qemu_log_mask(LOG_GUEST_ERROR, "XICS: Bad ICP access 0x%"
> +                  HWADDR_PRIx"/%d\n", addr, width);
> +}
> +
> +static const MemoryRegionOps xics_native_default_ops = {
> +    .read = xics_native_default_read,
> +    .write = xics_native_default_write,
> +    .valid.min_access_size = 1,
> +    .valid.max_access_size = 4,
> +    .impl.min_access_size = 1,
> +    .impl.max_access_size = 4,
> +    .endianness = DEVICE_BIG_ENDIAN,
> +};
> +
> +static void xics_native_set_nr_servers(XICSState *xics, uint32_t nr_servers,
> +                                       Error **errp)
> +{
> +    xics_set_nr_servers(xics, nr_servers, TYPE_ICP, errp);
> +}
> +
> +static void xics_native_realize(DeviceState *dev, Error **errp)
> +{
> +    XICSState *xics = XICS_COMMON(dev);
> +    XICSNative *xicsn = XICS_NATIVE(dev);
> +    Error *error = NULL;
> +    int i;
> +
> +    if (!xics->nr_servers) {
> +        error_setg(errp, "Number of servers needs to be greater than 0");
> +        return;
> +    }
> +
> +    for (i = 0; i < xics->nr_servers; i++) {
> +        object_property_set_bool(OBJECT(&xics->ss[i]), true, "realized",
> +                                 &error);
> +        if (error) {
> +            error_propagate(errp, error);
> +            return;
> +        }
> +    }
> +
> +    /*
> +     * Initialize the container region for the ICPs and the subregion
> +     * for each cpu. The mmapping will be done at the board level
> +     * depending on the pir of the core.
> +     *
> +     * TODO: build a name with the chip id
> +     */
> +    memory_region_init_io(&xicsn->icp_mmio, OBJECT(dev),
> +                          &xics_native_default_ops, xicsn, "icp-0",
> +                          PNV_XICS_SIZE);

I don't think you should need these native ops.  I believe you can
construct a memory region as a "pure" container, then just put the
populated regions inside it.

> +    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &xicsn->icp_mmio);
> +
> +    xicsn->icp_mmios = g_new0(MemoryRegion, xics->nr_servers);
> +    for (i = 0; i < xics->nr_servers; i++) {
> +        ICPState *icp = &xics->ss[i];
> +        memory_region_init_io(&xicsn->icp_mmios[i], OBJECT(dev),
> +                              &xics_native_ops, icp, "icp-0", 0x1000);
> +    }
> +}
> +
> +static void xics_native_class_init(ObjectClass *oc, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(oc);
> +    XICSStateClass *xsc = XICS_NATIVE_CLASS(oc);
> +
> +    dc->realize = xics_native_realize;
> +    xsc->set_nr_servers = xics_native_set_nr_servers;
> +}
> +
> +static const TypeInfo xics_native_info = {
> +    .name          = TYPE_XICS_NATIVE,
> +    .parent        = TYPE_XICS_COMMON,
> +    .instance_size = sizeof(XICSNative),
> +    .class_size = sizeof(XICSStateClass),
> +    .class_init    = xics_native_class_init,
> +    .instance_init = xics_native_initfn,
> +};
> +
> +static void xics_native_register_types(void)
> +{
> +    type_register_static(&xics_native_info);
> +}
> +
> +type_init(xics_native_register_types)
> +
> +void xics_native_populate_icp(PnvChip *chip, void *fdt, int offset,
> +                              uint32_t pir, uint32_t count)
> +{
> +    uint64_t addr;
> +    char *name;
> +    const char compat[] = "IBM,power8-icp\0IBM,ppc-xicp";
> +    uint32_t irange[2], i, rsize;
> +    uint64_t *reg;
> +
> +    /*
> +     * TODO: add multichip ICP BAR
> +     */
> +    addr = PNV_XICS_BASE | (pir << 12);
> +
> +    irange[0] = cpu_to_be32(pir);
> +    irange[1] = cpu_to_be32(count);
> +
> +    rsize = sizeof(uint64_t) * 2 * count;
> +    reg = g_malloc(rsize);
> +    for (i = 0; i < count; i++) {
> +        reg[i * 2] = cpu_to_be64(addr | ((pir + i) * 0x1000));
> +        reg[i * 2 + 1] = cpu_to_be64(0x1000);
> +    }
> +
> +    name = g_strdup_printf("address@hidden"PRIX64, addr);
> +    offset = fdt_add_subnode(fdt, offset, name);
> +    _FDT(offset);
> +    g_free(name);
> +
> +    _FDT((fdt_setprop(fdt, offset, "compatible", compat, sizeof(compat))));
> +    _FDT((fdt_setprop(fdt, offset, "reg", reg, rsize)));
> +    _FDT((fdt_setprop_string(fdt, offset, "device_type",
> +                              "PowerPC-External-Interrupt-Presentation")));
> +    _FDT((fdt_setprop(fdt, offset, "interrupt-controller", NULL, 0)));
> +    _FDT((fdt_setprop(fdt, offset, "ibm,interrupt-server-ranges",
> +                       irange, sizeof(irange))));
> +    _FDT((fdt_setprop_cell(fdt, offset, "#interrupt-cells", 1)));
> +    _FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 0)));
> +    g_free(reg);
> +}
> diff --git a/include/hw/ppc/pnv.h b/include/hw/ppc/pnv.h
> index 02ac1c5f428e..c08ed1c72b17 100644
> --- a/include/hw/ppc/pnv.h
> +++ b/include/hw/ppc/pnv.h
> @@ -126,4 +126,23 @@ typedef struct PnvMachineState {
>  #define PNV_XSCOM_BASE(chip)                                            \
>      (chip->xscom_base + ((uint64_t)(chip)->chip_id) * PNV_XSCOM_SIZE)
>  
> +/*
> + * XSCOM 0x20109CA defines the ICP BAR:
> + *
> + * 0:29   : bits 14 to 43 of address to define 1 MB region.
> + * 30     : 1 to enable ICP to receive loads/stores against its BAR region
> + * 31:63  : Constant 0
> + *
> + * Usually defined as :
> + *
> + *      0xffffe00200000000 -> 0x0003ffff80000000
> + *      0xffffe00600000000 -> 0x0003ffff80100000
> + *      0xffffe02200000000 -> 0x0003ffff80800000
> + *      0xffffe02600000000 -> 0x0003ffff80900000
> + *
> + * TODO: make a macro using the chip hw id
> + */
> +#define PNV_XICS_BASE         0x0003ffff80000000ull
> +#define PNV_XICS_SIZE         0x0000000000100000ull
> +
>  #endif /* _PPC_PNV_H */
> diff --git a/include/hw/ppc/xics.h b/include/hw/ppc/xics.h
> index 6e5a113332c6..911cdd5e549f 100644
> --- a/include/hw/ppc/xics.h
> +++ b/include/hw/ppc/xics.h
> @@ -119,8 +119,27 @@ struct ICPState {
>      bool cap_irq_xics_enabled;
>  
>      XICSState *xics;
> +
> +    /*
> +     * for XICSNative (not used by Linux).
> +     */
> +    uint32_t links[3];
>  };
>  
> +#define TYPE_XICS_NATIVE "xics-native"
> +#define XICS_NATIVE(obj) OBJECT_CHECK(XICSNative, (obj), TYPE_XICS_NATIVE)
> +#define XICS_NATIVE_CLASS(klass) \
> +     OBJECT_CLASS_CHECK(XICSStateClass, (klass), TYPE_XICS_NATIVE)
> +#define XICS_NATIVE_GET_CLASS(obj) \
> +     OBJECT_CLASS_CHECK(XICSStateClass, (obj), TYPE_XICS_NATIVE)
> +
> +typedef struct XICSNative {
> +    XICSState parent_obj;
> +
> +    MemoryRegion icp_mmio;
> +    MemoryRegion *icp_mmios;
> +} XICSNative;
> +
>  #define TYPE_ICS_BASE "ics-base"
>  #define ICS_BASE(obj) OBJECT_CHECK(ICSState, (obj), TYPE_ICS_BASE)
>  
> @@ -209,4 +228,9 @@ void ics_set_irq_type(ICSState *ics, int srcno, bool lsi);
>  
>  ICSState *xics_find_source(XICSState *icp, int irq);
>  
> +typedef struct PnvChip PnvChip;
> +
> +void xics_native_populate_icp(PnvChip *chip, void *fdt, int offset,
> +                              uint32_t base, uint32_t count);
> +
>  #endif /* XICS_H */

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

signature.asc
Description: PGP signature