[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-ppc] [PATCH 2/2] monitor: QEMU Monitor Instruction Disassembly Inc
From: |
Tom Musta |
Subject: |
[Qemu-ppc] [PATCH 2/2] monitor: QEMU Monitor Instruction Disassembly Incorrect for PowerPC LE Mode |
Date: |
Wed, 9 Apr 2014 14:53:24 -0500 |
The monitor support for disassembling instructions does not honor the MSR[LE]
bit for PowerPC processors.
This change enhances the monitor_disas() routine by supporting a flag bit
for Little Endian mode. Bit 16 is used since that bit was used in the
analagous guest disassembly routine target_disas().
Also, to be consistent with target_disas(), the disassembler bfd_mach field
can be passed in the flags argument.
Reported-by: Anton Blanchard <address@hidden>
Signed-off-by: Tom Musta <address@hidden>
Reviewed-by: Peter Maydell <address@hidden>
---
V2: Look specifically at bit 16 for LE. Support machine configuration in flags.
V3: Changed documentation of 'flags' argument to simply refer to the
target_disas
description (per Peter Maydell's review).
V4: Corrections to comments.
The bug can be easily observed by dumping the first few instructions of an
interrupt vector (0x300 is the Data Storage Interrupt handler in PPC)
(qemu) xp/8i 0x300
0x0000000000000300: .long 0x60
0x0000000000000304: lhzu r18,-19843(r3)
0x0000000000000308: .long 0x60
0x000000000000030c: lhzu r18,-20099(r2)
0x0000000000000310: lwz r0,11769(0)
0x0000000000000314: lhzu r23,8317(r2)
0x0000000000000318: .long 0x7813427c
0x000000000000031c: lbz r0,19961(0)
With the patch applied, the disassembly now looks correct:
(qemu) xp/8i 0x300
0x0000000000000300: nop
0x0000000000000304: mtsprg 2,r13
0x0000000000000308: nop
0x000000000000030c: mfsprg r13,1
0x0000000000000310: std r9,128(r13)
0x0000000000000314: mfspr r9,896
0x0000000000000318: mr r2,r2
0x000000000000031c: std r10,136(r13)
disas.c | 14 ++++++++++++--
monitor.c | 4 ++++
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/disas.c b/disas.c
index 1397167..44a019a 100644
--- a/disas.c
+++ b/disas.c
@@ -445,6 +445,8 @@ monitor_fprintf(FILE *stream, const char *fmt, ...)
return 0;
}
+/* Disassembler for the monitor.
+ See target_disas for a description of flags. */
void monitor_disas(Monitor *mon, CPUArchState *env,
target_ulong pc, int nb_insn, int is_physical, int flags)
{
@@ -485,11 +487,19 @@ void monitor_disas(Monitor *mon, CPUArchState *env,
s.info.mach = bfd_mach_sparc_v9b;
#endif
#elif defined(TARGET_PPC)
+ if (flags & 0xFFFF) {
+ /* If we have a precise definition of the instruction set, use it. */
+ s.info.mach = flags & 0xFFFF;
+ } else {
#ifdef TARGET_PPC64
- s.info.mach = bfd_mach_ppc64;
+ s.info.mach = bfd_mach_ppc64;
#else
- s.info.mach = bfd_mach_ppc;
+ s.info.mach = bfd_mach_ppc;
#endif
+ }
+ if ((flags >> 16) & 1) {
+ s.info.endian = BFD_ENDIAN_LITTLE;
+ }
print_insn = print_insn_ppc;
#elif defined(TARGET_M68K)
print_insn = print_insn_m68k;
diff --git a/monitor.c b/monitor.c
index 342e83b..3ae561b 100644
--- a/monitor.c
+++ b/monitor.c
@@ -1309,6 +1309,10 @@ static void memory_dump(Monitor *mon, int count, int
format, int wsize,
}
}
#endif
+#ifdef TARGET_PPC
+ flags = msr_le << 16;
+ flags |= env->bfd_mach;
+#endif
monitor_disas(mon, env, addr, count, is_physical, flags);
return;
}
--
1.7.1