[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

trying u-boot on qemu

From: ckim
Subject: trying u-boot on qemu
Date: Sun, 10 Oct 2021 23:36:51 +0900


To try u-boot on qemu, I did 

$ make ARCH=arm CROSS_COMPILE=aarch64-none-elf- qemu_arm64_defconfig

$ make ARCH=arm CROSS_COMPILE=aarch64-none-elf-

It compiled ok. I did then,

$ qemu-system-aarch64 -M virt -bios u-boot.bin

'g_io_module_load': dlerror not working..


Failed to load module: /usr/lib/x86_64-linux-gnu/gio/modules/libgvfsdbus.so

Gtk-Message: 23:10:08.763: Failed to load module "canberra-gtk-module"

Gtk-Message: 23:10:08.765: Failed to load module "canberra-gtk-module"


(I had tried ARM=arm64 but it gave me error below when compiling

$ make ARCH=arm64 CROSS_COMPILE=aarch64-none-elf-

scripts/kconfig/conf  --syncconfig Kconfig

ln: failed to create symbolic link 'arch/arm64/include/asm/arch': No such file or directory

make[1]: *** [scripts/Makefile.autoconf:133: create_symlink] Error 1

  CFGCHK  u-boot.cfg

make: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/uboot.release'.  Stop.


Is this procedure (using ARCH=arm) correct?

Any comment appreciated.

Thank you.

Chan Kim


reply via email to

[Prev in Thread] Current Thread [Next in Thread]