Does qemu-system-mips works for anyone?
If affirmative could him please tell me what system is he using?
I'm getting out of ideas..
On 04/10/12 21:21, Jaime wrote:
On 04/10/12 20:02, Mike Lovell wrote:
I've checked both graphical output and console (with ctr-alt-1 and
ctrl-alt-3) but they're empty. I get a "normal" behaviour if I
test qemu-system-i386, the console starts to print a lot of
information. Regardless something is wrong with initrd or append
parameters, at least you will see some output sent by the emulated
kernel. This isn't happening when executing qemu-system-mips,
nothing appears to run (except for the fact that the process is
consuming 99% of cpu resources), the console doesn't even show an
On 10/03/2012 02:57 PM, Jaime
I'm trying to use qemu-system-mips with no results, nothing
but a black screen appears.
I've used both qemu package from ubuntu 12.04 (1.0.50) and
local version compiled (1.2.0 and 1.2.50) with same results.
Here is the configure:
It compiles without problem. But when running:
this shows a black screen, anything else, no messages in the
window nor in the console.
I downloaded mips-test image from
but also I've tested other (which is the one I'm interested
on, using OpenWrt) with same results.
Any idea what's going on?
the window that opens when you run qemu-system-* is the
graphical console output of the guest. pressing ctrl-alt-1 will
change to the console for the qemu monitor. pressing ctrl-alt-2
will change to a console for a serial port to the guest. the
"console=/dev/ttyS0" option on --append tells the kernel to use
a serial console for its output which should show up when you
change to the serial console by pressing ctrl-alt-2.
I've tested also other "--append" and -nographic combinations with
the same result.
This is my cpu:
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm
dtherm tpr_shadow vnmi flexpriority
bogomips : 4987.51
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
Could it be some cpu, or libraries issue?