[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-discuss] About how to connect from guest "10.0.2.15" to remote
Re: [Qemu-discuss] About how to connect from guest "10.0.2.15" to remote "192.168.1.xx"
Tue, 14 Feb 2012 10:33:19 -0700
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:18.104.22.168) Gecko/20111108 Lightning/1.0b2 Thunderbird/3.1.16
On 02/14/2012 02:21 AM, Qi Zhang wrote:
I'm trying to use QEMU to emulate a simple Linux Guest for
some specific task
I have download/compile the Linux 3.2.5 kernel and busybox
1.19.4 and successfully make the guest system running after some
Also the guest system can mount host NFS after I set the eth0
IP to 10.0.2.15. (mount -t nfs 10.0.2.2:/xxx/xxx /tmp)
Now the host system is also connect to a LAN (192.168.1.10),
and there is application running on the guest system, who want to talk
to another server on the LAN (192.168.1.8)
but guest (10.0.2.15) can't ping to the remote server (192.168.1.8),
I have manually add the default gateway as 10.0.2.2, that
still not work.
Destination Gateway Genmask Flags Metric
Ref Use Iface
0.0.0.0 10.0.2.2 0.0.0.0 UG 0 0
10.0.0.0 0.0.0.0 255.0.0.0 U 0 0
Can anybody help me to figure it out?
Wish the solution is not about use the tap/bridge solution,
I was lack of related network knowledge and the only thing I
know is use QEMU "user net" is something similar as "NAT" option in
though when use NAT the host can't ping to guest, but the
guest can ping to everywhere and there is no bridge I think
my host system is Ubuntu 11.10 and the command to start the QEMU is
"qemu-system-x86_64 -kernel arch/x86/boot/bzImage -boot d
-append 'console=ttyS0, 115200' -nographic -net nic -net user"
if i remember correctly, the user networking doesn't support ping or
various other ICMP messages. it uses a limited IP stack directly in the
qemu process and doesn't support everything that the kernel's IP stack
supports. after you set the ip address and default gateway in the guest,
try connecting to the service you want to talk to or try putting a web
page through wget. i frequently just use `wget http://google.com/` to
test network connectivity when using user networking.