[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 00/22] configs: switch boards to "default y"
From: |
Fabiano Rosas |
Subject: |
Re: [PATCH 00/22] configs: switch boards to "default y" |
Date: |
Tue, 23 Apr 2024 14:57:20 -0300 |
Paolo Bonzini <pbonzini@redhat.com> writes:
> Some boards, notably ARM boards that use TCG, are already using
> "default y". This was done to remove TCG-only boards from
> a KVM-only build in commit 29d9efca16 (2023-04-26).
>
> This series converts all other boards to that, so that the requirements
> of each board are clearer in the Kconfig files.
>
> For now, the only such use is MIPS's 64-bit and endianness requirements.
> In the future, it will be possible to enable/disable boards based
> on the presence of required libraries, for example libfdt, or
> their deprecation status.
>
> There is an important difference in that Kconfig symbols for boards
> have to be enabled in a --without-default-devices build, similar to
> devices.
And how do we make that happen?
>
> Paolo
>
> Paolo Bonzini (22):
> configs: list "implied" device groups in the default configs
> alpha: switch boards to "default y"
> arm: switch boards to "default y"
> avr: switch boards to "default y"
> cris: switch boards to "default y"
> hppa: switch boards to "default y"
> i386: switch boards to "default y"
> loongarch: switch boards to "default y"
> m68k: switch boards to "default y"
> microblaze: switch boards to "default y"
> meson: make target endianneess available to Kconfig
> mips: switch boards to "default y"
> nios2: switch boards to "default y"
> openrisc: switch boards to "default y"
> ppc: switch boards to "default y"
> riscv: switch boards to "default y"
> rx: switch boards to "default y"
> s390x: switch boards to "default y"
> sh4: switch boards to "default y"
> sparc: switch boards to "default y"
> tricore: switch boards to "default y"
> xtensa: switch boards to "default y"
>
> configs/devices/alpha-softmmu/default.mak | 5 ++--
> configs/devices/arm-softmmu/default.mak | 5 +++-
> configs/devices/avr-softmmu/default.mak | 5 ++--
> configs/devices/cris-softmmu/default.mak | 5 ++--
> configs/devices/hppa-softmmu/default.mak | 5 ++--
> configs/devices/i386-softmmu/default.mak | 11 ++++---
> .../devices/loongarch64-softmmu/default.mak | 6 +++-
> configs/devices/m68k-softmmu/default.mak | 13 ++++----
> .../devices/microblaze-softmmu/default.mak | 9 +++---
> configs/devices/mips-softmmu/common.mak | 5 ++--
> configs/devices/mips64-softmmu/default.mak | 4 ++-
> configs/devices/mips64el-softmmu/default.mak | 10 ++++---
> configs/devices/nios2-softmmu/default.mak | 7 ++---
> configs/devices/or1k-softmmu/default.mak | 9 ++++--
> configs/devices/ppc-softmmu/default.mak | 30 +++++++++++--------
> configs/devices/ppc64-softmmu/default.mak | 8 ++---
> configs/devices/riscv32-softmmu/default.mak | 17 +++++------
> configs/devices/riscv64-softmmu/default.mak | 19 ++++++------
> configs/devices/rx-softmmu/default.mak | 3 +-
> configs/devices/s390x-softmmu/default.mak | 5 ++--
> configs/devices/sh4-softmmu/default.mak | 7 ++---
> configs/devices/sparc-softmmu/default.mak | 7 ++---
> configs/devices/sparc64-softmmu/default.mak | 7 ++---
> configs/devices/tricore-softmmu/default.mak | 7 +++--
> configs/devices/xtensa-softmmu/default.mak | 11 ++++---
> meson.build | 12 ++++----
> hw/alpha/Kconfig | 2 ++
> hw/arm/Kconfig | 2 ++
> hw/avr/Kconfig | 3 ++
> hw/cris/Kconfig | 2 ++
> hw/hppa/Kconfig | 2 ++
> hw/i386/Kconfig | 10 ++++++-
> hw/loongarch/Kconfig | 2 ++
> hw/m68k/Kconfig | 10 +++++++
> hw/microblaze/Kconfig | 6 ++++
> hw/mips/Kconfig | 12 ++++++++
> hw/nios2/Kconfig | 9 +++---
> hw/openrisc/Kconfig | 4 +++
> hw/ppc/Kconfig | 26 ++++++++++++++++
> hw/riscv/Kconfig | 14 +++++++++
> hw/rx/Kconfig | 2 ++
> hw/s390x/Kconfig | 2 ++
> hw/sh4/Kconfig | 4 +++
> hw/sparc/Kconfig | 4 +++
> hw/sparc64/Kconfig | 4 +++
> hw/tricore/Kconfig | 4 +++
> hw/xtensa/Kconfig | 6 ++++
> target/Kconfig | 3 ++
> target/i386/Kconfig | 1 +
> target/ppc/Kconfig | 1 +
> 50 files changed, 252 insertions(+), 115 deletions(-)
- [PATCH 16/22] riscv: switch boards to "default y", (continued)
- [PATCH 16/22] riscv: switch boards to "default y", Paolo Bonzini, 2024/04/23
- [PATCH 18/22] s390x: switch boards to "default y", Paolo Bonzini, 2024/04/23
- [PATCH 19/22] sh4: switch boards to "default y", Paolo Bonzini, 2024/04/23
- [PATCH 20/22] sparc: switch boards to "default y", Paolo Bonzini, 2024/04/23
- [PATCH 22/22] xtensa: switch boards to "default y", Paolo Bonzini, 2024/04/23
- [PATCH 21/22] tricore: switch boards to "default y", Paolo Bonzini, 2024/04/23
- Re: [PATCH 00/22] configs: switch boards to "default y",
Fabiano Rosas <=