[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v3 2/3] tests/tcg: Factor out gdbstub test functions
|
From: |
Alex Bennée |
|
Subject: |
Re: [PATCH v3 2/3] tests/tcg: Factor out gdbstub test functions |
|
Date: |
Mon, 22 Jan 2024 16:00:44 +0000 |
|
User-agent: |
mu4e 1.11.27; emacs 29.1 |
Ilya Leoshkevich <iii@linux.ibm.com> writes:
> Both the report() function as well as the initial gdbstub test sequence
> are copy-pasted into ~10 files with slight modifications. This
> indicates that they are indeed generic, so factor them out. While
> at it, add a few newlines to make the formatting closer to PEP-8.
>
> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
> ---
> tests/guest-debug/run-test.py | 7 ++-
> tests/guest-debug/test_gdbstub.py | 58 +++++++++++++++++++
> tests/tcg/aarch64/gdbstub/test-sve-ioctl.py | 34 +----------
> tests/tcg/aarch64/gdbstub/test-sve.py | 33 +----------
> tests/tcg/multiarch/gdbstub/interrupt.py | 47 ++-------------
> tests/tcg/multiarch/gdbstub/memory.py | 41 +------------
> tests/tcg/multiarch/gdbstub/registers.py | 41 ++-----------
> tests/tcg/multiarch/gdbstub/sha1.py | 40 ++-----------
> .../multiarch/gdbstub/test-proc-mappings.py | 39 +------------
> .../multiarch/gdbstub/test-qxfer-auxv-read.py | 37 +-----------
> .../gdbstub/test-thread-breakpoint.py | 37 +-----------
> tests/tcg/s390x/gdbstub/test-signals-s390x.py | 42 +-------------
> tests/tcg/s390x/gdbstub/test-svc.py | 39 +------------
> 13 files changed, 98 insertions(+), 397 deletions(-)
> create mode 100644 tests/guest-debug/test_gdbstub.py
>
> diff --git a/tests/guest-debug/run-test.py b/tests/guest-debug/run-test.py
> index b13b27d4b19..368ff8a8903 100755
> --- a/tests/guest-debug/run-test.py
> +++ b/tests/guest-debug/run-test.py
> @@ -97,7 +97,12 @@ def log(output, msg):
> sleep(1)
> log(output, "GDB CMD: %s" % (gdb_cmd))
>
> - result = subprocess.call(gdb_cmd, shell=True, stdout=output,
> stderr=stderr)
> + gdb_env = dict(os.environ)
> + gdb_pythonpath = gdb_env.get("PYTHONPATH", "").split(os.pathsep)
> + gdb_pythonpath.append(os.path.dirname(os.path.realpath(__file__)))
> + gdb_env["PYTHONPATH"] = os.pathsep.join(gdb_pythonpath)
> + result = subprocess.call(gdb_cmd, shell=True, stdout=output,
> stderr=stderr,
> + env=gdb_env)
>
> # A result of greater than 128 indicates a fatal signal (likely a
> # crash due to gdb internal failure). That's a problem for GDB and
> diff --git a/tests/guest-debug/test_gdbstub.py
> b/tests/guest-debug/test_gdbstub.py
> new file mode 100644
> index 00000000000..a71cdaa915a
> --- /dev/null
> +++ b/tests/guest-debug/test_gdbstub.py
> @@ -0,0 +1,58 @@
> +"""Helper functions for gdbstub testing
> +
> +"""
> +from __future__ import print_function
> +import gdb
> +import sys
> +import traceback
> +
> +fail_count = 0
> +
> +
> +def report(cond, msg):
> + """Report success/fail of a test"""
> + if cond:
> + print("PASS: {}".format(msg))
> + else:
> + print("FAIL: {}".format(msg))
> + global fail_count
> + fail_count += 1
> +
> +
> +def main(test, expected_arch=None):
> + """Run a test function
> +
> + This runs as the script it sourced (via -x, via run-test.py)."""
> + try:
> + inferior = gdb.selected_inferior()
> + arch = inferior.architecture()
> + print("ATTACHED: {}".format(arch.name()))
> + if expected_arch is not None:
> + report(arch.name() == expected_arch,
> + "connected to {}".format(expected_arch))
> + except (gdb.error, AttributeError):
> + print("SKIP: not connected")
> + exit(0)
> +
> + if gdb.parse_and_eval("$pc") == 0:
> + print("SKIP: PC not set")
> + exit(0)
> +
> + try:
> + test()
> + except:
> + print("GDB Exception:")
> + traceback.print_exc(file=sys.stdout)
> + global fail_count
> + fail_count += 1
> + import code
> + code.InteractiveConsole(locals=globals()).interact()
> + raise
While I can see this is useful we don't want to default to an
interactive console as that will hang the test in CI type setups. Can we
make this a option we enable?
> +
> + try:
> + gdb.execute("kill")
> + except gdb.error:
> + pass
> +
> + print("All tests complete: {} failures".format(fail_count))
> + exit(fail_count)
> diff --git a/tests/tcg/aarch64/gdbstub/test-sve-ioctl.py
> b/tests/tcg/aarch64/gdbstub/test-sve-ioctl.py
> index ee8d467e59d..a78a3a2514d 100644
> --- a/tests/tcg/aarch64/gdbstub/test-sve-ioctl.py
> +++ b/tests/tcg/aarch64/gdbstub/test-sve-ioctl.py
> @@ -8,19 +8,10 @@
> #
>
> import gdb
> -import sys
> +from test_gdbstub import main, report
>
> initial_vlen = 0
> -failcount = 0
>
> -def report(cond, msg):
> - "Report success/fail of test"
> - if cond:
> - print ("PASS: %s" % (msg))
> - else:
> - print ("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
>
> class TestBreakpoint(gdb.Breakpoint):
> def __init__(self, sym_name="__sve_ld_done"):
> @@ -64,26 +55,5 @@ def run_test():
>
> gdb.execute("c")
>
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - report(arch.name() == "aarch64", "connected to aarch64")
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -try:
> - # Run the actual tests
> - run_test()
> -except:
> - print ("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> - import code
> - code.InteractiveConsole(locals=globals()).interact()
> - raise
>
> -print("All tests complete: %d failures" % failcount)
> -exit(failcount)
> +main(run_test, expected_arch="aarch64")
> diff --git a/tests/tcg/aarch64/gdbstub/test-sve.py
> b/tests/tcg/aarch64/gdbstub/test-sve.py
> index afd8ece98dd..84cdcd4a32e 100644
> --- a/tests/tcg/aarch64/gdbstub/test-sve.py
> +++ b/tests/tcg/aarch64/gdbstub/test-sve.py
> @@ -6,20 +6,10 @@
> #
>
> import gdb
> -import sys
> +from test_gdbstub import main, report
>
> MAGIC = 0xDEADBEEF
>
> -failcount = 0
> -
> -def report(cond, msg):
> - "Report success/fail of test"
> - if cond:
> - print ("PASS: %s" % (msg))
> - else:
> - print ("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
>
> def run_test():
> "Run through the tests one by one"
> @@ -54,24 +44,5 @@ def run_test():
> report(str(v.type) == "uint64_t", "size of %s" % (reg))
> report(int(v) == MAGIC, "%s is 0x%x" % (reg, MAGIC))
>
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - report(arch.name() == "aarch64", "connected to aarch64")
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -try:
> - # Run the actual tests
> - run_test()
> -except:
> - print ("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> -
> -print("All tests complete: %d failures" % failcount)
>
> -exit(failcount)
> +main(run_test, expected_arch="aarch64")
> diff --git a/tests/tcg/multiarch/gdbstub/interrupt.py
> b/tests/tcg/multiarch/gdbstub/interrupt.py
> index c016e7afbbf..90a45b5140a 100644
> --- a/tests/tcg/multiarch/gdbstub/interrupt.py
> +++ b/tests/tcg/multiarch/gdbstub/interrupt.py
> @@ -8,19 +8,7 @@
> #
>
> import gdb
> -import sys
> -
> -failcount = 0
> -
> -
> -def report(cond, msg):
> - "Report success/fail of test"
> - if cond:
> - print("PASS: %s" % (msg))
> - else:
> - print("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
> +from test_gdbstub import main, report
>
>
> def check_interrupt(thread):
> @@ -59,6 +47,9 @@ def run_test():
> Test if interrupting the code always lands us on the same thread when
> running with scheduler-lock enabled.
> """
> + if len(gdb.selected_inferior().threads()) == 1:
> + print("SKIP: set to run on a single thread")
> + exit(0)
>
> gdb.execute("set scheduler-locking on")
> for thread in gdb.selected_inferior().threads():
> @@ -66,32 +57,4 @@ def run_test():
> "thread %d resumes correctly on interrupt" % thread.num)
>
>
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - print("ATTACHED: %s" % arch.name())
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -if gdb.parse_and_eval('$pc') == 0:
> - print("SKIP: PC not set")
> - exit(0)
> -if len(gdb.selected_inferior().threads()) == 1:
> - print("SKIP: set to run on a single thread")
> - exit(0)
> -
> -try:
> - # Run the actual tests
> - run_test()
> -except (gdb.error):
> - print("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> - pass
> -
> -# Finally kill the inferior and exit gdb with a count of failures
> -gdb.execute("kill")
> -exit(failcount)
> +main(run_test)
> diff --git a/tests/tcg/multiarch/gdbstub/memory.py
> b/tests/tcg/multiarch/gdbstub/memory.py
> index fb1d06b7bb7..532b92e7fb3 100644
> --- a/tests/tcg/multiarch/gdbstub/memory.py
> +++ b/tests/tcg/multiarch/gdbstub/memory.py
> @@ -9,18 +9,7 @@
>
> import gdb
> import sys
> -
> -failcount = 0
> -
> -
> -def report(cond, msg):
> - "Report success/fail of test"
> - if cond:
> - print("PASS: %s" % (msg))
> - else:
> - print("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
> +from test_gdbstub import main, report
>
>
> def check_step():
> @@ -99,29 +88,5 @@ def run_test():
>
> report(cbp.hit_count == 0, "didn't reach backstop")
>
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - print("ATTACHED: %s" % arch.name())
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -if gdb.parse_and_eval('$pc') == 0:
> - print("SKIP: PC not set")
> - exit(0)
> -
> -try:
> - # Run the actual tests
> - run_test()
> -except (gdb.error):
> - print("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> - pass
> -
> -# Finally kill the inferior and exit gdb with a count of failures
> -gdb.execute("kill")
> -exit(failcount)
> +
> +main(run_test)
> diff --git a/tests/tcg/multiarch/gdbstub/registers.py
> b/tests/tcg/multiarch/gdbstub/registers.py
> index 688c0611072..b3d13cb077f 100644
> --- a/tests/tcg/multiarch/gdbstub/registers.py
> +++ b/tests/tcg/multiarch/gdbstub/registers.py
> @@ -7,20 +7,11 @@
> # SPDX-License-Identifier: GPL-2.0-or-later
>
> import gdb
> -import sys
> import xml.etree.ElementTree as ET
> +from test_gdbstub import main, report
>
> -initial_vlen = 0
> -failcount = 0
>
> -def report(cond, msg):
> - "Report success/fail of test."
> - if cond:
> - print("PASS: %s" % (msg))
> - else:
> - print("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
> +initial_vlen = 0
>
>
> def fetch_xml_regmap():
> @@ -75,6 +66,7 @@ def fetch_xml_regmap():
>
> return reg_map
>
> +
> def get_register_by_regnum(reg_map, regnum):
> """
> Helper to find a register from the map via its XML regnum
> @@ -84,6 +76,7 @@ def get_register_by_regnum(reg_map, regnum):
> return entry
> return None
>
> +
> def crosscheck_remote_xml(reg_map):
> """
> Cross-check the list of remote-registers with the XML info.
> @@ -144,6 +137,7 @@ def crosscheck_remote_xml(reg_map):
> elif "seen" not in x_reg:
> print(f"{x_reg} wasn't seen in remote-registers")
>
> +
> def initial_register_read(reg_map):
> """
> Do an initial read of all registers that we know gdb cares about
> @@ -214,27 +208,4 @@ def run_test():
> complete_and_diff(reg_map)
>
>
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - print("ATTACHED: %s" % arch.name())
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -if gdb.parse_and_eval('$pc') == 0:
> - print("SKIP: PC not set")
> - exit(0)
> -
> -try:
> - run_test()
> -except (gdb.error):
> - print ("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> - pass
> -
> -print("All tests complete: %d failures" % failcount)
> -exit(failcount)
> +main(run_test)
> diff --git a/tests/tcg/multiarch/gdbstub/sha1.py
> b/tests/tcg/multiarch/gdbstub/sha1.py
> index 416728415f9..1ce711a402c 100644
> --- a/tests/tcg/multiarch/gdbstub/sha1.py
> +++ b/tests/tcg/multiarch/gdbstub/sha1.py
> @@ -7,19 +7,11 @@
> #
>
> import gdb
> -import sys
> +from test_gdbstub import main, report
> +
>
> initial_vlen = 0
> -failcount = 0
>
> -def report(cond, msg):
> - "Report success/fail of test"
> - if cond:
> - print("PASS: %s" % (msg))
> - else:
> - print("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
>
> def check_break(sym_name):
> "Setup breakpoint, continue and check we stopped."
> @@ -35,6 +27,7 @@ def check_break(sym_name):
>
> bp.delete()
>
> +
> def run_test():
> "Run through the tests one by one"
>
> @@ -57,28 +50,5 @@ def run_test():
> # finally check we don't barf inspecting registers
> gdb.execute("info registers")
>
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - print("ATTACHED: %s" % arch.name())
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -if gdb.parse_and_eval('$pc') == 0:
> - print("SKIP: PC not set")
> - exit(0)
> -
> -try:
> - # Run the actual tests
> - run_test()
> -except (gdb.error):
> - print ("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> - pass
> -
> -print("All tests complete: %d failures" % failcount)
> -exit(failcount)
> +
> +main(run_test)
> diff --git a/tests/tcg/multiarch/gdbstub/test-proc-mappings.py
> b/tests/tcg/multiarch/gdbstub/test-proc-mappings.py
> index 04ec61d2197..564613fabf0 100644
> --- a/tests/tcg/multiarch/gdbstub/test-proc-mappings.py
> +++ b/tests/tcg/multiarch/gdbstub/test-proc-mappings.py
> @@ -3,20 +3,7 @@
> This runs as a sourced script (via -x, via run-test.py)."""
> from __future__ import print_function
> import gdb
> -import sys
> -
> -
> -n_failures = 0
> -
> -
> -def report(cond, msg):
> - """Report success/fail of a test"""
> - if cond:
> - print("PASS: {}".format(msg))
> - else:
> - print("FAIL: {}".format(msg))
> - global n_failures
> - n_failures += 1
> +from test_gdbstub import main, report
>
>
> def run_test():
> @@ -37,26 +24,4 @@ def run_test():
> # report("/sha1" in mappings, "Found the test binary name in the
> mappings")
>
>
> -def main():
> - """Prepare the environment and run through the tests"""
> - try:
> - inferior = gdb.selected_inferior()
> - print("ATTACHED: {}".format(inferior.architecture().name()))
> - except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)")
> - exit(0)
> -
> - if gdb.parse_and_eval('$pc') == 0:
> - print("SKIP: PC not set")
> - exit(0)
> -
> - try:
> - # Run the actual tests
> - run_test()
> - except gdb.error:
> - report(False, "GDB Exception: {}".format(sys.exc_info()[0]))
> - print("All tests complete: %d failures" % n_failures)
> - exit(n_failures)
> -
> -
> -main()
> +main(run_test)
> diff --git a/tests/tcg/multiarch/gdbstub/test-qxfer-auxv-read.py
> b/tests/tcg/multiarch/gdbstub/test-qxfer-auxv-read.py
> index 926fa962b77..00c26ab4a95 100644
> --- a/tests/tcg/multiarch/gdbstub/test-qxfer-auxv-read.py
> +++ b/tests/tcg/multiarch/gdbstub/test-qxfer-auxv-read.py
> @@ -6,18 +6,8 @@
> #
>
> import gdb
> -import sys
> +from test_gdbstub import main, report
>
> -failcount = 0
> -
> -def report(cond, msg):
> - "Report success/fail of test"
> - if cond:
> - print ("PASS: %s" % (msg))
> - else:
> - print ("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
>
> def run_test():
> "Run through the tests one by one"
> @@ -26,28 +16,5 @@ def run_test():
> report(isinstance(auxv, str), "Fetched auxv from inferior")
> report(auxv.find("sha1"), "Found test binary name in auxv")
>
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - print("ATTACHED: %s" % arch.name())
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -if gdb.parse_and_eval('$pc') == 0:
> - print("SKIP: PC not set")
> - exit(0)
> -
> -try:
> - # Run the actual tests
> - run_test()
> -except (gdb.error):
> - print ("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> - pass
>
> -print("All tests complete: %d failures" % failcount)
> -exit(failcount)
> +main(run_test)
> diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> index e57d2a8db8b..4d6b6b9fbe7 100644
> --- a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> +++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> @@ -6,18 +6,8 @@
> #
>
> import gdb
> -import sys
> +from test_gdbstub import main, report
>
> -failcount = 0
> -
> -def report(cond, msg):
> - "Report success/fail of test"
> - if cond:
> - print ("PASS: %s" % (msg))
> - else:
> - print ("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
>
> def run_test():
> "Run through the tests one by one"
> @@ -29,28 +19,5 @@ def run_test():
> frame = gdb.selected_frame()
> report(str(frame.function()) == "thread1_func", "break @ %s"%frame)
>
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - print("ATTACHED: %s" % arch.name())
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -if gdb.parse_and_eval('$pc') == 0:
> - print("SKIP: PC not set")
> - exit(0)
> -
> -try:
> - # Run the actual tests
> - run_test()
> -except (gdb.error):
> - print ("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> - pass
>
> -print("All tests complete: %d failures" % failcount)
> -exit(failcount)
> +main(run_test)
> diff --git a/tests/tcg/s390x/gdbstub/test-signals-s390x.py
> b/tests/tcg/s390x/gdbstub/test-signals-s390x.py
> index ca2bbc0b03e..b6b7b39fc46 100644
> --- a/tests/tcg/s390x/gdbstub/test-signals-s390x.py
> +++ b/tests/tcg/s390x/gdbstub/test-signals-s390x.py
> @@ -7,19 +7,7 @@
> #
>
> import gdb
> -import sys
> -
> -failcount = 0
> -
> -
> -def report(cond, msg):
> - """Report success/fail of test"""
> - if cond:
> - print("PASS: %s" % (msg))
> - else:
> - print("FAIL: %s" % (msg))
> - global failcount
> - failcount += 1
> +from test_gdbstub import main, report
>
>
> def run_test():
> @@ -42,31 +30,7 @@ def run_test():
> gdb.Breakpoint("_exit")
> gdb.execute("c")
> status = int(gdb.parse_and_eval("$r2"))
> - report(status == 0, "status == 0");
> -
> -
> -#
> -# This runs as the script it sourced (via -x, via run-test.py)
> -#
> -try:
> - inferior = gdb.selected_inferior()
> - arch = inferior.architecture()
> - print("ATTACHED: %s" % arch.name())
> -except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)", file=sys.stderr)
> - exit(0)
> -
> -if gdb.parse_and_eval("$pc") == 0:
> - print("SKIP: PC not set")
> - exit(0)
> + report(status == 0, "status == 0")
>
> -try:
> - # Run the actual tests
> - run_test()
> -except (gdb.error):
> - print("GDB Exception: %s" % (sys.exc_info()[0]))
> - failcount += 1
> - pass
>
> -print("All tests complete: %d failures" % failcount)
> -exit(failcount)
> +main(run_test)
> diff --git a/tests/tcg/s390x/gdbstub/test-svc.py
> b/tests/tcg/s390x/gdbstub/test-svc.py
> index 804705fede9..17210b4e020 100644
> --- a/tests/tcg/s390x/gdbstub/test-svc.py
> +++ b/tests/tcg/s390x/gdbstub/test-svc.py
> @@ -3,20 +3,7 @@
> This runs as a sourced script (via -x, via run-test.py)."""
> from __future__ import print_function
> import gdb
> -import sys
> -
> -
> -n_failures = 0
> -
> -
> -def report(cond, msg):
> - """Report success/fail of a test"""
> - if cond:
> - print("PASS: {}".format(msg))
> - else:
> - print("FAIL: {}".format(msg))
> - global n_failures
> - n_failures += 1
> +from test_gdbstub import main, report
>
>
> def run_test():
> @@ -35,26 +22,4 @@ def run_test():
> gdb.execute("si")
>
>
> -def main():
> - """Prepare the environment and run through the tests"""
> - try:
> - inferior = gdb.selected_inferior()
> - print("ATTACHED: {}".format(inferior.architecture().name()))
> - except (gdb.error, AttributeError):
> - print("SKIPPING (not connected)")
> - exit(0)
> -
> - if gdb.parse_and_eval('$pc') == 0:
> - print("SKIP: PC not set")
> - exit(0)
> -
> - try:
> - # Run the actual tests
> - run_test()
> - except gdb.error:
> - report(False, "GDB Exception: {}".format(sys.exc_info()[0]))
> - print("All tests complete: %d failures" % n_failures)
> - exit(n_failures)
> -
> -
> -main()
> +main(run_test)
--
Alex Bennée
Virtualisation Tech Lead @ Linaro