[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 10/14] virtio-blk: rename dataplane to ioeventfd
From: |
Kevin Wolf |
Subject: |
[PULL 10/14] virtio-blk: rename dataplane to ioeventfd |
Date: |
Fri, 19 Jan 2024 19:13:23 +0100 |
From: Stefan Hajnoczi <stefanha@redhat.com>
The dataplane code is really about using ioeventfd. It's used both for
IOThreads (what we think of as dataplane) and for the core virtio-pci
code's ioeventfd feature (which is enabled by default and used when no
IOThread has been specified). Rename the code to reflect this.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/hw/virtio/virtio-blk.h | 8 ++--
hw/block/virtio-blk.c | 78 +++++++++++++++++-----------------
2 files changed, 43 insertions(+), 43 deletions(-)
diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index fecffdc303..833a9a344f 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -60,10 +60,10 @@ struct VirtIOBlock {
unsigned short sector_mask;
bool original_wce;
VMChangeStateEntry *change;
- bool dataplane_disabled;
- bool dataplane_started;
- bool dataplane_starting;
- bool dataplane_stopping;
+ bool ioeventfd_disabled;
+ bool ioeventfd_started;
+ bool ioeventfd_starting;
+ bool ioeventfd_stopping;
/*
* The AioContext for each virtqueue. The BlockDriverState will use the
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 47494ebadd..e342cb2cfb 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -64,7 +64,7 @@ static void virtio_blk_req_complete(VirtIOBlockReq *req,
unsigned char status)
iov_discard_undo(&req->inhdr_undo);
iov_discard_undo(&req->outhdr_undo);
virtqueue_push(req->vq, &req->elem, req->in_len);
- if (s->dataplane_started && !s->dataplane_disabled) {
+ if (s->ioeventfd_started && !s->ioeventfd_disabled) {
virtio_notify_irqfd(vdev, req->vq);
} else {
virtio_notify(vdev, req->vq);
@@ -1141,12 +1141,12 @@ static void virtio_blk_handle_output(VirtIODevice
*vdev, VirtQueue *vq)
{
VirtIOBlock *s = (VirtIOBlock *)vdev;
- if (!s->dataplane_disabled && !s->dataplane_started) {
+ if (!s->ioeventfd_disabled && !s->ioeventfd_started) {
/* Some guests kick before setting VIRTIO_CONFIG_S_DRIVER_OK so start
- * dataplane here instead of waiting for .set_status().
+ * ioeventfd here instead of waiting for .set_status().
*/
virtio_device_start_ioeventfd(vdev);
- if (!s->dataplane_disabled) {
+ if (!s->ioeventfd_disabled) {
return;
}
}
@@ -1213,7 +1213,7 @@ static void virtio_blk_reset(VirtIODevice *vdev)
VirtIOBlockReq *req;
/* Dataplane has stopped... */
- assert(!s->dataplane_started);
+ assert(!s->ioeventfd_started);
/* ...but requests may still be in flight. */
blk_drain(s->blk);
@@ -1380,7 +1380,7 @@ static void virtio_blk_set_status(VirtIODevice *vdev,
uint8_t status)
VirtIOBlock *s = VIRTIO_BLK(vdev);
if (!(status & (VIRTIO_CONFIG_S_DRIVER | VIRTIO_CONFIG_S_DRIVER_OK))) {
- assert(!s->dataplane_started);
+ assert(!s->ioeventfd_started);
}
if (!(status & VIRTIO_CONFIG_S_DRIVER_OK)) {
@@ -1545,7 +1545,7 @@ static void virtio_blk_resize(void *opaque)
aio_bh_schedule_oneshot(qemu_get_aio_context(), virtio_resize_cb, vdev);
}
-static void virtio_blk_data_plane_detach(VirtIOBlock *s)
+static void virtio_blk_ioeventfd_detach(VirtIOBlock *s)
{
VirtIODevice *vdev = VIRTIO_DEVICE(s);
@@ -1555,7 +1555,7 @@ static void virtio_blk_data_plane_detach(VirtIOBlock *s)
}
}
-static void virtio_blk_data_plane_attach(VirtIOBlock *s)
+static void virtio_blk_ioeventfd_attach(VirtIOBlock *s)
{
VirtIODevice *vdev = VIRTIO_DEVICE(s);
@@ -1570,8 +1570,8 @@ static void virtio_blk_drained_begin(void *opaque)
{
VirtIOBlock *s = opaque;
- if (s->dataplane_started) {
- virtio_blk_data_plane_detach(s);
+ if (s->ioeventfd_started) {
+ virtio_blk_ioeventfd_detach(s);
}
}
@@ -1580,8 +1580,8 @@ static void virtio_blk_drained_end(void *opaque)
{
VirtIOBlock *s = opaque;
- if (s->dataplane_started) {
- virtio_blk_data_plane_attach(s);
+ if (s->ioeventfd_started) {
+ virtio_blk_ioeventfd_attach(s);
}
}
@@ -1651,11 +1651,11 @@ static bool virtio_blk_vq_aio_context_init(VirtIOBlock
*s, Error **errp)
}
/*
- * If dataplane is (re-)enabled while the guest is running there could
+ * If ioeventfd is (re-)enabled while the guest is running there could
* be block jobs that can conflict.
*/
if (blk_op_is_blocked(conf->conf.blk, BLOCK_OP_TYPE_DATAPLANE, errp)) {
- error_prepend(errp, "cannot start virtio-blk dataplane: ");
+ error_prepend(errp, "cannot start virtio-blk ioeventfd: ");
return false;
}
}
@@ -1688,7 +1688,7 @@ static void virtio_blk_vq_aio_context_cleanup(VirtIOBlock
*s)
{
VirtIOBlkConf *conf = &s->conf;
- assert(!s->dataplane_started);
+ assert(!s->ioeventfd_started);
if (conf->iothread_vq_mapping_list) {
IOThreadVirtQueueMappingList *node;
@@ -1708,7 +1708,7 @@ static void virtio_blk_vq_aio_context_cleanup(VirtIOBlock
*s)
}
/* Context: BQL held */
-static int virtio_blk_data_plane_start(VirtIODevice *vdev)
+static int virtio_blk_start_ioeventfd(VirtIODevice *vdev)
{
VirtIOBlock *s = VIRTIO_BLK(vdev);
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s)));
@@ -1718,11 +1718,11 @@ static int virtio_blk_data_plane_start(VirtIODevice
*vdev)
Error *local_err = NULL;
int r;
- if (s->dataplane_started || s->dataplane_starting) {
+ if (s->ioeventfd_started || s->ioeventfd_starting) {
return 0;
}
- s->dataplane_starting = true;
+ s->ioeventfd_starting = true;
/* Set up guest notifier (irq) */
r = k->set_guest_notifiers(qbus->parent, nvqs, true);
@@ -1773,14 +1773,14 @@ static int virtio_blk_data_plane_start(VirtIODevice
*vdev)
/*
* These fields must be visible to the IOThread when it processes the
- * virtqueue, otherwise it will think dataplane has not started yet.
+ * virtqueue, otherwise it will think ioeventfd has not started yet.
*
- * Make sure ->dataplane_started is false when blk_set_aio_context() is
+ * Make sure ->ioeventfd_started is false when blk_set_aio_context() is
* called above so that draining does not cause the host notifier to be
* detached/attached prematurely.
*/
- s->dataplane_starting = false;
- s->dataplane_started = true;
+ s->ioeventfd_starting = false;
+ s->ioeventfd_started = true;
smp_wmb(); /* paired with aio_notify_accept() on the read side */
/* Get this show started by hooking up our callbacks */
@@ -1812,8 +1812,8 @@ static int virtio_blk_data_plane_start(VirtIODevice *vdev)
fail_host_notifiers:
k->set_guest_notifiers(qbus->parent, nvqs, false);
fail_guest_notifiers:
- s->dataplane_disabled = true;
- s->dataplane_starting = false;
+ s->ioeventfd_disabled = true;
+ s->ioeventfd_starting = false;
return -ENOSYS;
}
@@ -1821,7 +1821,7 @@ static int virtio_blk_data_plane_start(VirtIODevice *vdev)
*
* Context: BH in IOThread
*/
-static void virtio_blk_data_plane_stop_vq_bh(void *opaque)
+static void virtio_blk_ioeventfd_stop_vq_bh(void *opaque)
{
VirtQueue *vq = opaque;
EventNotifier *host_notifier = virtio_queue_get_host_notifier(vq);
@@ -1836,7 +1836,7 @@ static void virtio_blk_data_plane_stop_vq_bh(void *opaque)
}
/* Context: BQL held */
-static void virtio_blk_data_plane_stop(VirtIODevice *vdev)
+static void virtio_blk_stop_ioeventfd(VirtIODevice *vdev)
{
VirtIOBlock *s = VIRTIO_BLK(vdev);
BusState *qbus = qdev_get_parent_bus(DEVICE(s));
@@ -1844,24 +1844,24 @@ static void virtio_blk_data_plane_stop(VirtIODevice
*vdev)
unsigned i;
unsigned nvqs = s->conf.num_queues;
- if (!s->dataplane_started || s->dataplane_stopping) {
+ if (!s->ioeventfd_started || s->ioeventfd_stopping) {
return;
}
/* Better luck next time. */
- if (s->dataplane_disabled) {
- s->dataplane_disabled = false;
- s->dataplane_started = false;
+ if (s->ioeventfd_disabled) {
+ s->ioeventfd_disabled = false;
+ s->ioeventfd_started = false;
return;
}
- s->dataplane_stopping = true;
+ s->ioeventfd_stopping = true;
if (!blk_in_drain(s->conf.conf.blk)) {
for (i = 0; i < nvqs; i++) {
VirtQueue *vq = virtio_get_queue(vdev, i);
AioContext *ctx = s->vq_aio_context[i];
- aio_wait_bh_oneshot(ctx, virtio_blk_data_plane_stop_vq_bh, vq);
+ aio_wait_bh_oneshot(ctx, virtio_blk_ioeventfd_stop_vq_bh, vq);
}
}
@@ -1886,10 +1886,10 @@ static void virtio_blk_data_plane_stop(VirtIODevice
*vdev)
}
/*
- * Set ->dataplane_started to false before draining so that host notifiers
+ * Set ->ioeventfd_started to false before draining so that host notifiers
* are not detached/attached anymore.
*/
- s->dataplane_started = false;
+ s->ioeventfd_started = false;
/* Wait for virtio_blk_dma_restart_bh() and in flight I/O to complete */
blk_drain(s->conf.conf.blk);
@@ -1903,7 +1903,7 @@ static void virtio_blk_data_plane_stop(VirtIODevice *vdev)
/* Clean up guest notifier (irq) */
k->set_guest_notifiers(qbus->parent, nvqs, false);
- s->dataplane_stopping = false;
+ s->ioeventfd_stopping = false;
}
static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
@@ -2011,9 +2011,9 @@ static void virtio_blk_device_realize(DeviceState *dev,
Error **errp)
}
qemu_coroutine_inc_pool_size(conf->num_queues * conf->queue_size / 2);
- /* Don't start dataplane if transport does not support notifiers. */
+ /* Don't start ioeventfd if transport does not support notifiers. */
if (!virtio_device_ioeventfd_enabled(vdev)) {
- s->dataplane_disabled = true;
+ s->ioeventfd_disabled = true;
}
virtio_blk_vq_aio_context_init(s, &err);
@@ -2137,8 +2137,8 @@ static void virtio_blk_class_init(ObjectClass *klass,
void *data)
vdc->reset = virtio_blk_reset;
vdc->save = virtio_blk_save_device;
vdc->load = virtio_blk_load_device;
- vdc->start_ioeventfd = virtio_blk_data_plane_start;
- vdc->stop_ioeventfd = virtio_blk_data_plane_stop;
+ vdc->start_ioeventfd = virtio_blk_start_ioeventfd;
+ vdc->stop_ioeventfd = virtio_blk_stop_ioeventfd;
}
static const TypeInfo virtio_blk_info = {
--
2.43.0
- [PULL 00/14] Block layer patches, Kevin Wolf, 2024/01/19
- [PULL 03/14] commit: Allow users to request only format driver names in backing file format, Kevin Wolf, 2024/01/19
- [PULL 01/14] block/blklogwrites: Fix a bug when logging "write zeroes" operations., Kevin Wolf, 2024/01/19
- [PULL 08/14] virtio-blk: move dataplane code into virtio-blk.c, Kevin Wolf, 2024/01/19
- [PULL 10/14] virtio-blk: rename dataplane to ioeventfd,
Kevin Wolf <=
- [PULL 05/14] iotests: add filter_qmp_generated_node_ids(), Kevin Wolf, 2024/01/19
- [PULL 02/14] string-output-visitor: Fix (pseudo) struct handling, Kevin Wolf, 2024/01/19
- [PULL 06/14] iotests: port 141 to Python for reliable QMP testing, Kevin Wolf, 2024/01/19
- [PULL 09/14] virtio-blk: rename dataplane create/destroy functions, Kevin Wolf, 2024/01/19
- [PULL 07/14] monitor: only run coroutine commands in qemu_aio_context, Kevin Wolf, 2024/01/19
- [PULL 04/14] stream: Allow users to request only format driver names in backing file format, Kevin Wolf, 2024/01/19
- [PULL 14/14] block/blklogwrites: Protect mutable driver state with a mutex., Kevin Wolf, 2024/01/19
- [PULL 12/14] virtio-blk: tolerate failure to set BlockBackend AioContext, Kevin Wolf, 2024/01/19
- [PULL 13/14] virtio-blk: always set ioeventfd during startup, Kevin Wolf, 2024/01/19
- [PULL 11/14] virtio-blk: restart s->rq reqs in vq AioContexts, Kevin Wolf, 2024/01/19