[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 07/11] next-cube.c: move static phase variable to NextRtc
From: |
Mark Cave-Ayland |
Subject: |
[PATCH v2 07/11] next-cube.c: move static phase variable to NextRtc |
Date: |
Wed, 20 Dec 2023 13:16:37 +0000 |
The phase variable represents part of the state machine used to clock data out
of the NextRtc device.
Note that this is a migration break for the NeXTRtc struct, but as nothing will
currently boot then we simply bump the migration version for now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
---
hw/m68k/next-cube.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/hw/m68k/next-cube.c b/hw/m68k/next-cube.c
index bcc7650cd9..f2222554fa 100644
--- a/hw/m68k/next-cube.c
+++ b/hw/m68k/next-cube.c
@@ -62,6 +62,7 @@ typedef struct next_dma {
} next_dma;
typedef struct NextRtc {
+ int8_t phase;
uint8_t ram[32];
uint8_t command;
uint8_t value;
@@ -124,7 +125,6 @@ static const uint8_t rtc_ram2[32] = {
static void nextscr2_write(NeXTPC *s, uint32_t val, int size)
{
- static int phase;
static uint8_t old_scr2;
uint8_t scr2_2;
NextRtc *rtc = &s->rtc;
@@ -145,25 +145,25 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int
size)
}
if (scr2_2 & 0x1) {
- /* DPRINTF("RTC %x phase %i\n", scr2_2, phase); */
- if (phase == -1) {
- phase = 0;
+ /* DPRINTF("RTC %x phase %i\n", scr2_2, rtc->phase); */
+ if (rtc->phase == -1) {
+ rtc->phase = 0;
}
/* If we are in going down clock... do something */
if (((old_scr2 & SCR2_RTCLK) != (scr2_2 & SCR2_RTCLK)) &&
((scr2_2 & SCR2_RTCLK) == 0)) {
- if (phase < 8) {
+ if (rtc->phase < 8) {
rtc->command = (rtc->command << 1) |
((scr2_2 & SCR2_RTDATA) ? 1 : 0);
}
- if (phase >= 8 && phase < 16) {
+ if (rtc->phase >= 8 && rtc->phase < 16) {
rtc->value = (rtc->value << 1) |
((scr2_2 & SCR2_RTDATA) ? 1 : 0);
/* if we read RAM register, output RT_DATA bit */
if (rtc->command <= 0x1F) {
scr2_2 = scr2_2 & (~SCR2_RTDATA);
- if (rtc->ram[rtc->command] & (0x80 >> (phase - 8))) {
+ if (rtc->ram[rtc->command] & (0x80 >> (rtc->phase - 8))) {
scr2_2 |= SCR2_RTDATA;
}
@@ -174,7 +174,7 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int
size)
if (rtc->command == 0x30) {
scr2_2 = scr2_2 & (~SCR2_RTDATA);
/* for now status = 0x98 (new rtc + FTU) */
- if (rtc->status & (0x80 >> (phase - 8))) {
+ if (rtc->status & (0x80 >> (rtc->phase - 8))) {
scr2_2 |= SCR2_RTDATA;
}
@@ -184,7 +184,7 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int
size)
/* read the status 0x31 */
if (rtc->command == 0x31) {
scr2_2 = scr2_2 & (~SCR2_RTDATA);
- if (rtc->control & (0x80 >> (phase - 8))) {
+ if (rtc->control & (0x80 >> (rtc->phase - 8))) {
scr2_2 |= SCR2_RTDATA;
}
rtc->retval = (rtc->retval << 1) |
@@ -220,7 +220,7 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int
size)
}
- if (ret & (0x80 >> (phase - 8))) {
+ if (ret & (0x80 >> (rtc->phase - 8))) {
scr2_2 |= SCR2_RTDATA;
}
rtc->retval = (rtc->retval << 1) |
@@ -229,8 +229,8 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int
size)
}
- phase++;
- if (phase == 16) {
+ rtc->phase++;
+ if (rtc->phase == 16) {
if (rtc->command >= 0x80 && rtc->command <= 0x9F) {
rtc->ram[rtc->command - 0x80] = rtc->value;
}
@@ -246,7 +246,7 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int
size)
}
} else {
/* else end or abort */
- phase = -1;
+ rtc->phase = -1;
rtc->command = 0;
rtc->value = 0;
}
@@ -911,9 +911,10 @@ static Property next_pc_properties[] = {
static const VMStateDescription next_rtc_vmstate = {
.name = "next-rtc",
- .version_id = 1,
- .minimum_version_id = 1,
+ .version_id = 2,
+ .minimum_version_id = 2,
.fields = (VMStateField[]) {
+ VMSTATE_INT8(phase, NextRtc),
VMSTATE_UINT8_ARRAY(ram, NextRtc, 32),
VMSTATE_UINT8(command, NextRtc),
VMSTATE_UINT8(value, NextRtc),
--
2.39.2
- [PATCH v2 00/11] next-cube: various tidy-ups and improvements, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 01/11] next-cube.c: add dummy Ethernet register to allow diagnostic to timeout, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 02/11] next-cube.c: don't pulse SCSI DMA IRQ upon reception of FLUSH command, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 03/11] next-cube.c: update mmio_ops to properly use modern memory API, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 05/11] next-cube.c: update and improve dma_ops, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 04/11] next-cube.c: update scr_ops to properly use modern memory API, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 06/11] next-cube.c: move static led variable to NeXTPC, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 07/11] next-cube.c: move static phase variable to NextRtc,
Mark Cave-Ayland <=
- [PATCH v2 08/11] next-cube.c: move static old_scr2 variable to NeXTPC, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 11/11] next-cube.c: move machine MemoryRegions into NeXTState, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 09/11] next-cube.c: move LED logic to new next_scr2_led_update() function, Mark Cave-Ayland, 2023/12/20
- [PATCH v2 10/11] next-cube.c: remove val and size arguments from nextscr2_write(), Mark Cave-Ayland, 2023/12/20