[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v7 03/11] hw/misc: Add qtest for NPCM7xx PCI Mailbox
From: |
Nabih Estefan |
Subject: |
[PATCH v7 03/11] hw/misc: Add qtest for NPCM7xx PCI Mailbox |
Date: |
Mon, 11 Dec 2023 17:52:06 +0000 |
From: Hao Wu <wuhaotsh@google.com>
This patches adds a qtest for NPCM7XX PCI Mailbox module.
It sends read and write requests to the module, and verifies that
the module contains the correct data after the requests.
Change-Id: I3948da277fc26352068420a26d8cc7cb2674cf40
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
---
tests/qtest/meson.build | 1 +
tests/qtest/npcm7xx_pci_mbox-test.c | 238 ++++++++++++++++++++++++++++
2 files changed, 239 insertions(+)
create mode 100644 tests/qtest/npcm7xx_pci_mbox-test.c
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 47dabf91d0..2ac79925f9 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -183,6 +183,7 @@ qtests_sparc64 = \
qtests_npcm7xx = \
['npcm7xx_adc-test',
'npcm7xx_gpio-test',
+ 'npcm7xx_pci_mbox-test',
'npcm7xx_pwm-test',
'npcm7xx_rng-test',
'npcm7xx_sdhci-test',
diff --git a/tests/qtest/npcm7xx_pci_mbox-test.c
b/tests/qtest/npcm7xx_pci_mbox-test.c
new file mode 100644
index 0000000000..24eec18e3c
--- /dev/null
+++ b/tests/qtest/npcm7xx_pci_mbox-test.c
@@ -0,0 +1,238 @@
+/*
+ * QTests for Nuvoton NPCM7xx PCI Mailbox Modules.
+ *
+ * Copyright 2021 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/bitops.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qnum.h"
+#include "libqtest-single.h"
+
+#define PCI_MBOX_BA 0xf0848000
+#define PCI_MBOX_IRQ 8
+
+/* register offset */
+#define PCI_MBOX_STAT 0x00
+#define PCI_MBOX_CTL 0x04
+#define PCI_MBOX_CMD 0x08
+
+#define CODE_OK 0x00
+#define CODE_INVALID_OP 0xa0
+#define CODE_INVALID_SIZE 0xa1
+#define CODE_ERROR 0xff
+
+#define OP_READ 0x01
+#define OP_WRITE 0x02
+#define OP_INVALID 0x41
+
+
+static int sock;
+static int fd;
+
+/*
+ * Create a local TCP socket with any port, then save off the port we got.
+ */
+static in_port_t open_socket(void)
+{
+ struct sockaddr_in myaddr;
+ socklen_t addrlen;
+
+ myaddr.sin_family = AF_INET;
+ myaddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+ myaddr.sin_port = 0;
+ sock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
+ g_assert(sock != -1);
+ g_assert(bind(sock, (struct sockaddr *) &myaddr, sizeof(myaddr)) != -1);
+ addrlen = sizeof(myaddr);
+ g_assert(getsockname(sock, (struct sockaddr *) &myaddr , &addrlen) != -1);
+ g_assert(listen(sock, 1) != -1);
+ return ntohs(myaddr.sin_port);
+}
+
+static void setup_fd(void)
+{
+ fd_set readfds;
+
+ FD_ZERO(&readfds);
+ FD_SET(sock, &readfds);
+ g_assert(select(sock + 1, &readfds, NULL, NULL, NULL) == 1);
+
+ fd = accept(sock, NULL, 0);
+ g_assert(fd >= 0);
+}
+
+static uint8_t read_response(uint8_t *buf, size_t len)
+{
+ uint8_t code;
+ ssize_t ret = read(fd, &code, 1);
+
+ if (ret == -1) {
+ return CODE_ERROR;
+ }
+ if (code != CODE_OK) {
+ return code;
+ }
+ g_test_message("response code: %x", code);
+ if (len > 0) {
+ ret = read(fd, buf, len);
+ if (ret < len) {
+ return CODE_ERROR;
+ }
+ }
+ return CODE_OK;
+}
+
+static void receive_data(uint64_t offset, uint8_t *buf, size_t len)
+{
+ uint8_t op = OP_READ;
+ uint8_t code;
+ ssize_t rv;
+
+ while (len > 0) {
+ uint8_t size;
+
+ if (len >= 8) {
+ size = 8;
+ } else if (len >= 4) {
+ size = 4;
+ } else if (len >= 2) {
+ size = 2;
+ } else {
+ size = 1;
+ }
+
+ g_test_message("receiving %u bytes", size);
+ /* Write op */
+ rv = write(fd, &op, 1);
+ g_assert_cmpint(rv, ==, 1);
+ /* Write offset */
+ rv = write(fd, (uint8_t *)&offset, sizeof(uint64_t));
+ g_assert_cmpint(rv, ==, sizeof(uint64_t));
+ /* Write size */
+ g_assert_cmpint(write(fd, &size, 1), ==, 1);
+
+ /* Read data and Expect response */
+ code = read_response(buf, size);
+ g_assert_cmphex(code, ==, CODE_OK);
+
+ buf += size;
+ offset += size;
+ len -= size;
+ }
+}
+
+static void send_data(uint64_t offset, const uint8_t *buf, size_t len)
+{
+ uint8_t op = OP_WRITE;
+ uint8_t code;
+ ssize_t rv;
+
+ while (len > 0) {
+ uint8_t size;
+
+ if (len >= 8) {
+ size = 8;
+ } else if (len >= 4) {
+ size = 4;
+ } else if (len >= 2) {
+ size = 2;
+ } else {
+ size = 1;
+ }
+
+ g_test_message("sending %u bytes", size);
+ /* Write op */
+ rv = write(fd, &op, 1);
+ g_assert_cmpint(rv, ==, 1);
+ /* Write offset */
+ rv = write(fd, (uint8_t *)&offset, sizeof(uint64_t));
+ g_assert_cmpint(rv, ==, sizeof(uint64_t));
+ /* Write size */
+ g_assert_cmpint(write(fd, &size, 1), ==, 1);
+ /* Write data */
+ g_assert_cmpint(write(fd, buf, size), ==, size);
+
+ /* Expect response */
+ code = read_response(NULL, 0);
+ g_assert_cmphex(code, ==, CODE_OK);
+
+ buf += size;
+ offset += size;
+ len -= size;
+ }
+}
+
+static void test_invalid_op(void)
+{
+ uint8_t op = OP_INVALID;
+ uint8_t code;
+ uint8_t buf[1];
+
+ g_assert_cmpint(write(fd, &op, 1), ==, 1);
+ code = read_response(buf, 1);
+ g_assert_cmphex(code, ==, CODE_INVALID_OP);
+}
+
+/* Send data via chardev and read them in guest. */
+static void test_guest_read(void)
+{
+ const char *data = "Hello World!";
+ uint64_t offset = 0xa0;
+ char buf[100];
+ size_t len = strlen(data);
+
+ send_data(offset, (uint8_t *)data, len);
+ memread(PCI_MBOX_BA + offset, buf, len);
+ g_assert_cmpint(strncmp(data, buf, len), ==, 0);
+}
+
+/* Write data in guest and read out via chardev. */
+static void test_guest_write(void)
+{
+ const char *data = "Hello World!";
+ uint64_t offset = 0xa0;
+ char buf[100];
+ size_t len = strlen(data);
+
+ memwrite(PCI_MBOX_BA + offset, data, len);
+ receive_data(offset, (uint8_t *)buf, len);
+ g_assert_cmpint(strncmp(data, buf, len), ==, 0);
+}
+
+int main(int argc, char **argv)
+{
+ int ret;
+ int port;
+
+ g_test_init(&argc, &argv, NULL);
+ port = open_socket();
+ g_test_message("port=%d", port);
+ global_qtest = qtest_initf("-machine npcm750-evb "
+ "-chardev socket,id=npcm7xx-pcimbox-chr,host=localhost,"
+ "port=%d,reconnect=10 "
+ "-global driver=npcm7xx-pci-mbox,property=chardev,"
+ "value=npcm7xx-pcimbox-chr",
+ port);
+ setup_fd();
+ qtest_irq_intercept_in(global_qtest, "/machine/soc/a9mpcore/gic");
+
+ qtest_add_func("/npcm7xx_pci_mbox/invalid_op", test_invalid_op);
+ qtest_add_func("/npcm7xx_pci_mbox/read", test_guest_read);
+ qtest_add_func("/npcm7xx_pci_mbox/write", test_guest_write);
+ ret = g_test_run();
+ qtest_quit(global_qtest);
+
+ return ret;
+}
--
2.43.0.472.g3155946c3a-goog
- [PATCH v7 00/11] Implementation of NPI Mailbox and GMAC Networking Module, Nabih Estefan, 2023/12/11
- [PATCH v7 01/11] hw/misc: Add Nuvoton's PCI Mailbox Module, Nabih Estefan, 2023/12/11
- [PATCH v7 02/11] hw/arm: Add PCI mailbox module to Nuvoton SoC, Nabih Estefan, 2023/12/11
- [PATCH v7 04/11] hw/net: Add NPCMXXX GMAC device, Nabih Estefan, 2023/12/11
- [PATCH v7 05/11] hw/arm: Add GMAC devices to NPCM7XX SoC, Nabih Estefan, 2023/12/11
- [PATCH v7 03/11] hw/misc: Add qtest for NPCM7xx PCI Mailbox,
Nabih Estefan <=
- [PATCH v7 07/11] include/hw/net: Implemented Classes and Masks for GMAC Descriptors, Nabih Estefan, 2023/12/11
- [PATCH v7 08/11] hw/net: General GMAC Implementation, Nabih Estefan, 2023/12/11
- [PATCH v7 06/11] tests/qtest: Creating qtest for GMAC Module, Nabih Estefan, 2023/12/11
- [PATCH v7 10/11] hw/net: GMAC Tx Implementation, Nabih Estefan, 2023/12/11
- [PATCH v7 11/11] tests/qtest: Adding PCS Module test to GMAC Qtest, Nabih Estefan, 2023/12/11
- [PATCH v7 09/11] hw/net: GMAC Rx Implementation, Nabih Estefan, 2023/12/11
- Re: [PATCH v7 00/11] Implementation of NPI Mailbox and GMAC Networking Module, Peter Maydell, 2023/12/14