[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 41/45] Add mailbox property tests. Part 2
From: |
Sergey Kambalin |
Subject: |
[PATCH v3 41/45] Add mailbox property tests. Part 2 |
Date: |
Sun, 3 Dec 2023 17:42:09 -0600 |
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
tests/qtest/bcm2838-mbox-property-test.c | 196 ++++++++++++++++++++++-
1 file changed, 195 insertions(+), 1 deletion(-)
diff --git a/tests/qtest/bcm2838-mbox-property-test.c
b/tests/qtest/bcm2838-mbox-property-test.c
index 80746dbb95..5322c563a0 100644
--- a/tests/qtest/bcm2838-mbox-property-test.c
+++ b/tests/qtest/bcm2838-mbox-property-test.c
@@ -49,7 +49,8 @@ FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
(TEST_TAG_TYPE(testname) * tag);
\
static void CHECK_FN_NAME(testname, __VA_ARGS__)
\
(TEST_TAG_TYPE(testname) *tag);
\
- static void TEST_FN_NAME(testname, __VA_ARGS__)(void) {
\
+ static void TEST_FN_NAME(testname, __VA_ARGS__)(void)
\
+ {
\
struct {
\
MboxBufHeader header;
\
TEST_TAG_TYPE(testname) tag;
\
@@ -188,6 +189,179 @@ DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, EMMC) {
}
/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, UART) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, UART) {
+ tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, UART) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, UART) {
+ tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, UART) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, UART) {
+ tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, CORE) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, CORE) {
+ tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, CORE) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, CORE) {
+ tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, CORE) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, CORE) {
+ tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, ANY) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, ANY) {
+ tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, ANY) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, ANY) {
+ tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, ANY) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, ANY) {
+ tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_TEMPERATURE) {
+ g_assert_cmphex(tag->response.value.temperature_id, ==,
TEMPERATURE_ID_SOC);
+ g_assert_cmpint(tag->response.value.temperature, ==, TEMPERATURE_SOC);
+}
+DECLARE_TEST_CASE_SETUP(GET_TEMPERATURE) {
+ tag->request.value.temperature_id = TEMPERATURE_ID_SOC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_TEMPERATURE) {
+ g_assert_cmphex(tag->response.value.temperature_id, ==,
TEMPERATURE_ID_SOC);
+ g_assert_cmpint(tag->response.value.temperature, ==, TEMPERATURE_SOC_MAX);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_TEMPERATURE) {
+ tag->request.value.temperature_id = TEMPERATURE_ID_SOC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(ALLOCATE_BUFFER) {
+ g_assert_cmphex(tag->response.value.base, ==, VC_FB_BASE);
+ g_assert_cmphex(tag->response.value.size, ==, VC_FB_SIZE);
+}
+DECLARE_TEST_CASE_SETUP(ALLOCATE_BUFFER) {
+ tag->request.value.alignment = ALIGN_4K;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(RELEASE_FRAMEBUFFER) {
+ /* No special checks are needed for this test */
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(BLANK_FRAMEBUFFER) {
+ g_assert_cmphex(tag->response.value.on, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(BLANK_FRAMEBUFFER) {
+ tag->request.value.on = 0;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_FB_PHYS_WIDTH) {
+ g_assert_cmpint(tag->response.value.width, ==, DUMMY_VALUE);
+ g_assert_cmpint(tag->response.value.height, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_FB_PHYS_WIDTH) {
+ tag->request.value.width = DUMMY_VALUE;
+ tag->request.value.height = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FB_PHYS_WIDTH, INITIAL) {
+ g_assert_cmpint(tag->response.value.width, ==, 640);
+ g_assert_cmpint(tag->response.value.height, ==, 480);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_PHYS_WIDTH) {
+ g_assert_cmpint(tag->response.value.width, ==, 800);
+ g_assert_cmpint(tag->response.value.height, ==, 600);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_PHYS_WIDTH) {
+ tag->request.value.width = 800;
+ tag->request.value.height = 600;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_FB_VIRT_WIDTH) {
+ g_assert_cmpint(tag->response.value.width, ==, DUMMY_VALUE);
+ g_assert_cmpint(tag->response.value.height, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_FB_VIRT_WIDTH) {
+ tag->request.value.width = DUMMY_VALUE;
+ tag->request.value.height = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FB_VIRT_WIDTH, INITIAL) {
+ g_assert_cmpint(tag->response.value.width, ==, 640);
+ g_assert_cmpint(tag->response.value.height, ==, 480);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_VIRT_WIDTH) {
+ g_assert_cmpint(tag->response.value.width, ==, 800);
+ g_assert_cmpint(tag->response.value.height, ==, 600);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_VIRT_WIDTH) {
+ tag->request.value.width = 800;
+ tag->request.value.height = 600;
+}
+
+//==============================================================================
int main(int argc, char **argv)
{
g_test_init(&argc, &argv, NULL);
@@ -201,6 +375,26 @@ int main(int argc, char **argv)
QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, EMMC);
QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, EMMC);
QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, EMMC);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, UART);
+ QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, UART);
+ QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, UART);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, CORE);
+ QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, CORE);
+ QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, CORE);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, ANY);
+ QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, ANY);
+ QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, ANY);
+ QTEST_ADD_TEST_CASE(GET_TEMPERATURE);
+ QTEST_ADD_TEST_CASE(GET_MAX_TEMPERATURE);
+ QTEST_ADD_TEST_CASE(ALLOCATE_BUFFER);
+ QTEST_ADD_TEST_CASE(RELEASE_FRAMEBUFFER);
+ QTEST_ADD_TEST_CASE(BLANK_FRAMEBUFFER);
+ QTEST_ADD_TEST_CASE(TEST_FB_PHYS_WIDTH);
+ QTEST_ADD_TEST_CASE(GET_FB_PHYS_WIDTH, INITIAL);
+ QTEST_ADD_TEST_CASE(SET_FB_PHYS_WIDTH);
+ QTEST_ADD_TEST_CASE(TEST_FB_VIRT_WIDTH);
+ QTEST_ADD_TEST_CASE(GET_FB_VIRT_WIDTH, INITIAL);
+ QTEST_ADD_TEST_CASE(SET_FB_VIRT_WIDTH);
return g_test_run();
}
--
2.34.1
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [PATCH v3 41/45] Add mailbox property tests. Part 2,
Sergey Kambalin <=