qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v3 33/45] Connect RNG200, PCIE and GENET to GIC


From: Sergey Kambalin
Subject: [PATCH v3 33/45] Connect RNG200, PCIE and GENET to GIC
Date: Sun, 3 Dec 2023 17:42:01 -0600

Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
 hw/arm/bcm2838.c                     | 19 +++++++++++++++++++
 include/hw/arm/bcm2838_peripherals.h |  2 ++
 2 files changed, 21 insertions(+)

diff --git a/hw/arm/bcm2838.c b/hw/arm/bcm2838.c
index 89cd9d5d8c..83f84b22ad 100644
--- a/hw/arm/bcm2838.c
+++ b/hw/arm/bcm2838.c
@@ -210,6 +210,10 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&ps_base->dwc2), 0,
                        qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_DWC2));
 
+    /* Connect RNG200 to the interrupt controller */
+    sysbus_connect_irq(SYS_BUS_DEVICE(&ps->rng200), 0,
+                       qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_RNG200));
+
     /* Connect DMA 0-6 to the interrupt controller */
     for (int_n = GIC_SPI_INTERRUPT_DMA_0; int_n <= GIC_SPI_INTERRUPT_DMA_6;
          int_n++) {
@@ -232,6 +236,21 @@ static void bcm2838_realize(DeviceState *dev, Error **errp)
     qdev_connect_gpio_out(dma_9_10_irq_orgate, 0,
                           qdev_get_gpio_in(gicdev, 
GIC_SPI_INTERRUPT_DMA_9_10));
 
+    /* Connect PCIe host bridge to the interrupt controller */
+    for (n = 0; n < BCM2838_PCIE_NUM_IRQS; n++) {
+        int_n = GIC_SPI_INTERRUPT_PCI_INT_A + n;
+        sysbus_connect_irq(SYS_BUS_DEVICE(&ps->pcie_host), n,
+                           qdev_get_gpio_in(gicdev, int_n));
+        bcm2838_pcie_host_set_irq_num(BCM2838_PCIE_HOST(&ps->pcie_host), n,
+                                      int_n);
+    }
+
+    /* Connect Gigabit Ethernet controller to the interrupt controller */
+    sysbus_connect_irq(SYS_BUS_DEVICE(&ps->genet), 0,
+                       qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_GENET_A));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&ps->genet), 1,
+                       qdev_get_gpio_in(gicdev, GIC_SPI_INTERRUPT_GENET_B));
+
     /* Pass through inbound GPIO lines to the GIC */
     qdev_init_gpio_in(dev, bcm2838_gic_set_irq, GIC_NUM_IRQS);
 
diff --git a/include/hw/arm/bcm2838_peripherals.h 
b/include/hw/arm/bcm2838_peripherals.h
index 1cfcf5dcce..cdeb892f04 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -17,6 +17,8 @@
 #include "hw/sd/sdhci.h"
 #include "hw/gpio/bcm2838_gpio.h"
 
+#define GENET_OFFSET            0x1580000
+
 /* SPI */
 #define GIC_SPI_INTERRUPT_MBOX         33
 #define GIC_SPI_INTERRUPT_MPHI         40
-- 
2.34.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]