qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v3 32/45] Enable BCM2838 GENET controller


From: Sergey Kambalin
Subject: [PATCH v3 32/45] Enable BCM2838 GENET controller
Date: Sun, 3 Dec 2023 15:48:57 -0600

Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
 hw/arm/bcm2838_peripherals.c         | 16 ++++++++++++++++
 hw/arm/raspi4b.c                     | 17 -----------------
 include/hw/arm/bcm2838_peripherals.h |  2 ++
 3 files changed, 18 insertions(+), 17 deletions(-)

diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index 65a659c15c..d962999daf 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -47,6 +47,15 @@ static void bcm2838_peripherals_init(Object *obj)
     object_initialize_child(obj, "pcie-host", &s->pcie_host,
                             TYPE_BCM2838_PCIE_HOST);
 
+    /* Gigabit Ethernet */
+    object_initialize_child(obj, "genet", &s->genet, TYPE_BCM2838_GENET);
+    for (int i = 0; i < nb_nics; i++) {
+        if ((nd_table[i].used && nd_table[i].model) && 
!strcmp(nd_table[i].model, "bcmgenet")) {
+            qdev_set_nic_properties(DEVICE(&s->genet), &nd_table[i]);
+            break;
+        }
+    }
+
     /* Extended Mass Media Controller 2 */
     object_initialize_child(obj, "emmc2", &s->emmc2, TYPE_SYSBUS_SDHCI);
 
@@ -231,6 +240,13 @@ static void bcm2838_peripherals_realize(DeviceState *dev, 
Error **errp)
     memory_region_add_subregion(get_system_memory(), PCIE_MMIO_ARM_OFFSET,
                                 &s->pcie_mmio_alias);
 
+    /* Gigabit Ethernet */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->genet), errp)) {
+        return;
+    }
+    regs_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->genet), 0);
+    memory_region_add_subregion(&s->peri_low_mr, GENET_OFFSET, regs_mr);
+
     create_unimp(s_base, &s->clkisp, "bcm2835-clkisp", CLOCK_ISP_OFFSET,
                  CLOCK_ISP_SIZE);
 
diff --git a/hw/arm/raspi4b.c b/hw/arm/raspi4b.c
index fda27d36cb..8aa8dfb087 100644
--- a/hw/arm/raspi4b.c
+++ b/hw/arm/raspi4b.c
@@ -64,23 +64,6 @@ static int raspi_add_memory_node(void *fdt, hwaddr mem_base, 
hwaddr mem_len)
 
 static void raspi4_modify_dtb(const struct arm_boot_info *info, void *fdt)
 {
-
-    /* Temporarily disable following devices until they are implemented*/
-    const char *to_be_removed_from_dt_as_wa[] = {
-        "brcm,bcm2711-genet-v5",
-    };
-
-    for (int i = 0; i < ARRAY_SIZE(to_be_removed_from_dt_as_wa); i++) {
-        const char *dev_str = to_be_removed_from_dt_as_wa[i];
-
-        int offset = fdt_node_offset_by_compatible(fdt, -1, dev_str);
-        if (offset >= 0) {
-            if (!fdt_nop_node(fdt, offset)) {
-                warn_report("bcm2711 dtc: %s has been disabled!", dev_str);
-            }
-        }
-    }
-
     uint64_t ram_size = board_ram_size(info->board_id);
 
     if (info->ram_size > UPPER_RAM_BASE) {
diff --git a/include/hw/arm/bcm2838_peripherals.h 
b/include/hw/arm/bcm2838_peripherals.h
index 20b7d1eb67..1cfcf5dcce 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -13,6 +13,7 @@
 #include "hw/misc/bcm2838_rng200.h"
 #include "hw/misc/bcm2838_thermal.h"
 #include "hw/arm/bcm2838_pcie.h"
+#include "hw/net/bcm2838_genet.h"
 #include "hw/sd/sdhci.h"
 #include "hw/gpio/bcm2838_gpio.h"
 
@@ -73,6 +74,7 @@ struct BCM2838PeripheralState {
     UnimplementedDeviceState clkisp;
     BCM2838PcieHostState pcie_host;
     BCM2838GpioState gpio;
+    BCM2838GenetState genet;
 
     OrIRQState mmc_irq_orgate;
     OrIRQState dma_7_8_irq_orgate;
-- 
2.34.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]