[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2] hw/usb: fix xhci port notify
From: |
Nikita Ostrenkov |
Subject: |
[PATCH v2] hw/usb: fix xhci port notify |
Date: |
Fri, 17 Nov 2023 17:35:58 +0000 |
>From MCF5253 Reference manual
>https://www.nxp.com/docs/en/reference-manual/MCF5253RM.pdf
Host mode: The controller sets this bit to a one when on any port a Connect
Status occurs, a PortEnable/Disable Change occurs, an Over Current Change
occurs, or the Force Port Resume bit is set as theresult of a J-K transition on
the suspended port.
Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com>
---
hw/usb/hcd-xhci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index 4b60114207..1b2f4ac721 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -2627,6 +2627,7 @@ static void xhci_port_notify(XHCIPort *port, uint32_t
bits)
if (!xhci_running(port->xhci)) {
return;
}
+ port->xhci->usbsts |= USBSTS_PCD;
xhci_event(port->xhci, &ev, 0);
}
--
2.34.1
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [PATCH v2] hw/usb: fix xhci port notify,
Nikita Ostrenkov <=