Re: [PATCH] target/riscv/kvm.c: fix mvendorid size in vcpu_set_machine_ids()

[Alistair Francis]

On Wed, Aug 2, 2023 at 2:02 PM Daniel Henrique Barboza
<dbarboza@ventanamicro.com> wrote:
>
> cpu->cfg.mvendorid is a 32 bit field and kvm_set_one_reg() always write
> a target_ulong val, i.e. a 64 bit field in a 64 bit host.
>
> Given that we're passing a pointer to the mvendorid field, the reg is
> reading 64 bits starting from mvendorid and going 32 bits in the next
> field, marchid. Here's an example:
>
> $ ./qemu-system-riscv64 -machine virt,accel=kvm -m 2G -smp 1 \
>    -cpu rv64,marchid=0xab,mvendorid=0xcd,mimpid=0xef(...)
>
> (inside the guest)
>  # cat /proc/cpuinfo
> processor       : 0
> hart            : 0
> isa             : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
> mmu             : sv57
> mvendorid       : 0xab000000cd
> marchid         : 0xab
> mimpid          : 0xef
>
> 'mvendorid' was written as a combination of 0xab (the value from the
> adjacent field, marchid) and its intended value 0xcd.
>
> Fix it by assigning cpu->cfg.mvendorid to a target_ulong var 'reg' and
> use it as input for kvm_set_one_reg(). Here's the result with this patch
> applied and using the same QEMU command line:
>
>  # cat /proc/cpuinfo
> processor       : 0
> hart            : 0
> isa             : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
> mmu             : sv57
> mvendorid       : 0xcd
> marchid         : 0xab
> mimpid          : 0xef
>
> This bug affects only the generic (rv64) CPUs when running with KVM in a
> 64 bit env since the 'host' CPU does not allow the machine IDs to be
> changed via command line.
>
> Fixes: 1fb5a622f7 ("target/riscv: handle mvendorid/marchid/mimpid for KVM 
> CPUs")
> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>

Thanks!

Applied to riscv-to-apply.next

Alistair

> ---
>  target/riscv/kvm.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
> index 9d8a8982f9..b1fd2233c0 100644
> --- a/target/riscv/kvm.c
> +++ b/target/riscv/kvm.c
> @@ -852,12 +852,19 @@ void kvm_arch_init_irq_routing(KVMState *s)
>  static int kvm_vcpu_set_machine_ids(RISCVCPU *cpu, CPUState *cs)
>  {
>      CPURISCVState *env = &cpu->env;
> +    target_ulong reg;
>      uint64_t id;
>      int ret;
>
>      id = kvm_riscv_reg_id(env, KVM_REG_RISCV_CONFIG,
>                            KVM_REG_RISCV_CONFIG_REG(mvendorid));
> -    ret = kvm_set_one_reg(cs, id, &cpu->cfg.mvendorid);
> +    /*
> +     * cfg.mvendorid is an uint32 but a target_ulong will
> +     * be written. Assign it to a target_ulong var to avoid
> +     * writing pieces of other cpu->cfg fields in the reg.
> +     */
> +    reg = cpu->cfg.mvendorid;
> +    ret = kvm_set_one_reg(cs, id, &reg);
>      if (ret != 0) {
>          return ret;
>      }
> --
> 2.41.0
>
>