[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [QEMU][PATCH v4 3/4] xlnx-versal: Connect Xilinx VERSAL CANFD contro
|
From: |
Francisco Iglesias |
|
Subject: |
Re: [QEMU][PATCH v4 3/4] xlnx-versal: Connect Xilinx VERSAL CANFD controllers |
|
Date: |
Tue, 25 Apr 2023 17:36:24 +0200 |
|
User-agent: |
Mutt/1.10.1 (2018-07-13) |
Hi Vikram,
On [2023 Apr 24] Mon 23:34:32, Vikram Garhwal wrote:
> Connect CANFD0 and CANFD1 on the Versal-virt machine and update
> xlnx-versal-virt
> document with CANFD command line examples.
>
> Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> docs/system/arm/xlnx-versal-virt.rst | 31 ++++++++++++++++++
> hw/arm/xlnx-versal-virt.c | 48 ++++++++++++++++++++++++++++
> hw/arm/xlnx-versal.c | 37 +++++++++++++++++++++
> include/hw/arm/xlnx-versal.h | 12 +++++++
> 4 files changed, 128 insertions(+)
>
> diff --git a/docs/system/arm/xlnx-versal-virt.rst
> b/docs/system/arm/xlnx-versal-virt.rst
> index 92ad10d2da..d2d1b26692 100644
> --- a/docs/system/arm/xlnx-versal-virt.rst
> +++ b/docs/system/arm/xlnx-versal-virt.rst
> @@ -34,6 +34,7 @@ Implemented devices:
> - DDR memory
> - BBRAM (36 bytes of Battery-backed RAM)
> - eFUSE (3072 bytes of one-time field-programmable bit array)
> +- 2 CANFDs
>
> QEMU does not yet model any other devices, including the PL and the AI
> Engine.
>
> @@ -224,3 +225,33 @@ To use a different index value, N, from default of 1,
> add:
>
> Better yet, do not use actual product data when running guest image
> on this Xilinx Versal Virt board.
> +
> +Using CANFDs for Versal Virt
> +""""""""""""""""""""""""""""
> +Versal CANFD controller is developed based on SocketCAN and QEMU CAN bus
> +implementation. Bus connection and socketCAN connection for each CAN module
> +can be set through command lines.
> +
> +To connect both CANFD0 and CANFD1 on the same bus:
> +
> +.. code-block:: bash
> +
> + -object can-bus,id=canbus -machine canbus0=canbus -machine canbus1=canbus
> +
> +To connect CANFD0 and CANFD1 to separate buses:
> +
> +.. code-block:: bash
> +
> + -object can-bus,id=canbus0 -object can-bus,id=canbus1 \
> + -machine canbus0=canbus0 -machine canbus1=canbus1
> +
> +The SocketCAN interface can connect to a Physical or a Virtual CAN
> interfaces on
> +the host machine. Please check this document to learn about CAN interface on
> +Linux: docs/system/devices/can.rst
> +
> +To connect CANFD0 and CANFD1 to host machine's CAN interface can0:
> +
> +.. code-block:: bash
> +
> + -object can-bus,id=canbus -machine canbus0=canbus -machine canbus1=canbus
> + -object can-host-socketcan,id=canhost0,if=can0,canbus=canbus
> diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c
> index 668a9d65a4..52c93a590d 100644
> --- a/hw/arm/xlnx-versal-virt.c
> +++ b/hw/arm/xlnx-versal-virt.c
> @@ -40,9 +40,11 @@ struct VersalVirt {
> uint32_t clk_25Mhz;
> uint32_t usb;
> uint32_t dwc;
> + uint32_t canfd[2];
> } phandle;
> struct arm_boot_info binfo;
>
> + CanBusState *canbus[XLNX_VERSAL_NR_CANFD];
> struct {
> bool secure;
> } cfg;
> @@ -235,6 +237,33 @@ static void fdt_add_uart_nodes(VersalVirt *s)
> }
> }
>
> +static void fdt_add_canfd_nodes(VersalVirt *s)
> +{
In this function we need to modify the generated dtb a little so the kernel
finds the devices correctly.
> + uint64_t addrs[] = { MM_CANFD0, MM_CANFD1 };
> + uint32_t size[] = { MM_CANFD0_SIZE, MM_CANFD1_SIZE };
> + unsigned int irqs[] = { VERSAL_CANFD0_IRQ_0, VERSAL_CANFD1_IRQ_0 };
Here we can swap above 3 lines for below:
uint64_t addrs[] = { MM_CANFD1, MM_CANFD0 };
uint32_t size[] = { MM_CANFD1_SIZE, MM_CANFD0_SIZE };
unsigned int irqs[] = { VERSAL_CANFD1_IRQ_0, VERSAL_CANFD0_IRQ_0 };
const char clocknames[] = "can_clk\0s_axi_aclk";
> + int i;
> +
> + /* Create and connect CANFD0 and CANFD1 nodes to canbus0. */
> + for (i = 0; i < ARRAY_SIZE(addrs); i++) {
> + char *name = g_strdup_printf("/canfd@%" PRIx64, addrs[i]);
> + qemu_fdt_add_subnode(s->fdt, name);
> + qemu_fdt_setprop_cell(s->fdt, name, "rx-fifo0", 0x40);
> + qemu_fdt_setprop_cell(s->fdt, name, "enable-rx-fifo1", 0x1);
> + qemu_fdt_setprop_cell(s->fdt, name, "rx-fifo1", 0x40);
Here we can swap above for 3 lines for below:
qemu_fdt_setprop_cell(s->fdt, name, "rx-fifo-depth", 0x40);
qemu_fdt_setprop_cell(s->fdt, name, "tx-mailbox-count", 0x20);
qemu_fdt_setprop_cells(s->fdt, name, "clocks",
s->phandle.clk_25Mhz, s->phandle.clk_25Mhz);
qemu_fdt_setprop(s->fdt, name, "clock-names",
clocknames, sizeof(clocknames));
> +
> + qemu_fdt_setprop_cells(s->fdt, name, "interrupts",
> + GIC_FDT_IRQ_TYPE_SPI, irqs[i],
> + GIC_FDT_IRQ_FLAGS_LEVEL_HI);
> + qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
> + 2, addrs[i], 2, size[i]);
> + qemu_fdt_setprop_string(s->fdt, name, "compatible",
> + "xlnx,versal-canfd");
And here we can swap above line with (kernel compatible):
"xlnx,canfd-2.0");
After changing above the linux kernel will find the devices:
...
[ 1.791998] CAN device driver interface
[ 1.732791] xilinx_can ff060000.canfd can0: reg_base=0x(____ptrval____)
irq=28 clock=25000000, tx buffers: actual 32, using 1
[ 1.734668] xilinx_can ff070000.canfd can1: reg_base=0x(____ptrval____)
irq=29 clock=25000000, tx buffers: actual 32, using 1
...
...
# ip a
...
2: can0: <NOARP40000> mtu 16 qdisc noop qlen 10
link/[280]
3: can1: <NOARP40000> mtu 16 qdisc noop qlen 10
link/[280]
...
Looks good otherwise!
Best regards,
Francisco Iglesias
> +
> + g_free(name);
> + }
> +}
> +
> static void fdt_add_fixed_link_nodes(VersalVirt *s, char *gemname,
> uint32_t phandle)
> {
> @@ -639,12 +668,17 @@ static void versal_virt_init(MachineState *machine)
> TYPE_XLNX_VERSAL);
> object_property_set_link(OBJECT(&s->soc), "ddr", OBJECT(machine->ram),
> &error_abort);
> + object_property_set_link(OBJECT(&s->soc), "canbus0",
> OBJECT(s->canbus[0]),
> + &error_abort);
> + object_property_set_link(OBJECT(&s->soc), "canbus1",
> OBJECT(s->canbus[1]),
> + &error_abort);
> sysbus_realize(SYS_BUS_DEVICE(&s->soc), &error_fatal);
>
> fdt_create(s);
> create_virtio_regions(s);
> fdt_add_gem_nodes(s);
> fdt_add_uart_nodes(s);
> + fdt_add_canfd_nodes(s);
> fdt_add_gic_nodes(s);
> fdt_add_timer_nodes(s);
> fdt_add_zdma_nodes(s);
> @@ -712,6 +746,20 @@ static void versal_virt_init(MachineState *machine)
>
> static void versal_virt_machine_instance_init(Object *obj)
> {
> + VersalVirt *s = XLNX_VERSAL_VIRT_MACHINE(obj);
> +
> + /*
> + * User can set canbus0 and canbus1 properties to can-bus object and
> connect
> + * to socketcan(optional) interface via command line.
> + */
> + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS,
> + (Object **)&s->canbus[0],
> + object_property_allow_set_link,
> + 0);
> + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS,
> + (Object **)&s->canbus[1],
> + object_property_allow_set_link,
> + 0);
> }
>
> static void versal_virt_machine_class_init(ObjectClass *oc, void *data)
> diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
> index 69b1b99e93..1594dd6c5c 100644
> --- a/hw/arm/xlnx-versal.c
> +++ b/hw/arm/xlnx-versal.c
> @@ -184,6 +184,38 @@ static void versal_create_uarts(Versal *s, qemu_irq *pic)
> }
> }
>
> +static void versal_create_canfds(Versal *s, qemu_irq *pic)
> +{
> + int i;
> + uint32_t irqs[] = { VERSAL_CANFD0_IRQ_0, VERSAL_CANFD1_IRQ_0};
> + uint64_t addrs[] = { MM_CANFD0, MM_CANFD1 };
> +
> + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.canfd); i++) {
> + char *name = g_strdup_printf("canfd%d", i);
> + SysBusDevice *sbd;
> + MemoryRegion *mr;
> +
> + object_initialize_child(OBJECT(s), name, &s->lpd.iou.canfd[i],
> + TYPE_XILINX_CANFD);
> + sbd = SYS_BUS_DEVICE(&s->lpd.iou.canfd[i]);
> +
> + object_property_set_int(OBJECT(&s->lpd.iou.canfd[i]), "ext_clk_freq",
> + XLNX_VERSAL_CANFD_REF_CLK , &error_abort);
> +
> + object_property_set_link(OBJECT(&s->lpd.iou.canfd[i]), "canfdbus",
> + OBJECT(s->lpd.iou.canbus[i]),
> + &error_abort);
> +
> + sysbus_realize(sbd, &error_fatal);
> +
> + mr = sysbus_mmio_get_region(sbd, 0);
> + memory_region_add_subregion(&s->mr_ps, addrs[i], mr);
> +
> + sysbus_connect_irq(sbd, 0, pic[irqs[i]]);
> + g_free(name);
> + }
> +}
> +
> static void versal_create_usbs(Versal *s, qemu_irq *pic)
> {
> DeviceState *dev;
> @@ -718,6 +750,7 @@ static void versal_realize(DeviceState *dev, Error **errp)
> versal_create_apu_gic(s, pic);
> versal_create_rpu_cpus(s);
> versal_create_uarts(s, pic);
> + versal_create_canfds(s, pic);
> versal_create_usbs(s, pic);
> versal_create_gems(s, pic);
> versal_create_admas(s, pic);
> @@ -757,6 +790,10 @@ static void versal_init(Object *obj)
> static Property versal_properties[] = {
> DEFINE_PROP_LINK("ddr", Versal, cfg.mr_ddr, TYPE_MEMORY_REGION,
> MemoryRegion *),
> + DEFINE_PROP_LINK("canbus0", Versal, lpd.iou.canbus[0],
> + TYPE_CAN_BUS, CanBusState *),
> + DEFINE_PROP_LINK("canbus1", Versal, lpd.iou.canbus[1],
> + TYPE_CAN_BUS, CanBusState *),
> DEFINE_PROP_END_OF_LIST()
> };
>
> diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
> index b6786e9832..39ee31185c 100644
> --- a/include/hw/arm/xlnx-versal.h
> +++ b/include/hw/arm/xlnx-versal.h
> @@ -31,6 +31,7 @@
> #include "hw/dma/xlnx_csu_dma.h"
> #include "hw/misc/xlnx-versal-crl.h"
> #include "hw/misc/xlnx-versal-pmc-iou-slcr.h"
> +#include "hw/net/xlnx-versal-canfd.h"
>
> #define TYPE_XLNX_VERSAL "xlnx-versal"
> OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL)
> @@ -43,6 +44,8 @@ OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL)
> #define XLNX_VERSAL_NR_SDS 2
> #define XLNX_VERSAL_NR_XRAM 4
> #define XLNX_VERSAL_NR_IRQS 192
> +#define XLNX_VERSAL_NR_CANFD 2
> +#define XLNX_VERSAL_CANFD_REF_CLK (24 * 1000 * 1000)
>
> struct Versal {
> /*< private >*/
> @@ -73,6 +76,8 @@ struct Versal {
> CadenceGEMState gem[XLNX_VERSAL_NR_GEMS];
> XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS];
> VersalUsb2 usb;
> + CanBusState *canbus[XLNX_VERSAL_NR_CANFD];
> + XlnxVersalCANFDState canfd[XLNX_VERSAL_NR_CANFD];
> } iou;
>
> /* Real-time Processing Unit. */
> @@ -133,6 +138,8 @@ struct Versal {
> #define VERSAL_CRL_IRQ 10
> #define VERSAL_UART0_IRQ_0 18
> #define VERSAL_UART1_IRQ_0 19
> +#define VERSAL_CANFD0_IRQ_0 20
> +#define VERSAL_CANFD1_IRQ_0 21
> #define VERSAL_USB0_IRQ_0 22
> #define VERSAL_GEM0_IRQ_0 56
> #define VERSAL_GEM0_WAKE_IRQ_0 57
> @@ -163,6 +170,11 @@ struct Versal {
> #define MM_UART1 0xff010000U
> #define MM_UART1_SIZE 0x10000
>
> +#define MM_CANFD0 0xff060000U
> +#define MM_CANFD0_SIZE 0x10000
> +#define MM_CANFD1 0xff070000U
> +#define MM_CANFD1_SIZE 0x10000
> +
> #define MM_GEM0 0xff0c0000U
> #define MM_GEM0_SIZE 0x10000
> #define MM_GEM1 0xff0d0000U
> --
> 2.17.1
>