Re: [PATCH v3 2/2] target/riscv: Add RVV registers to log

[Alistair Francis]

On Mon, Apr 10, 2023 at 10:47 PM Ivan Klokov <ivan.klokov@syntacore.com> wrote:
>
> Print RvV extesion register to log if VPU option is enabled.
>
> Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  target/riscv/cpu.c | 56 +++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 5bc0005cc7..cfd063a5dc 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -172,6 +172,14 @@ const char * const riscv_fpr_regnames[] = {
>    "f30/ft10", "f31/ft11"
>  };
>
> +const char * const riscv_rvv_regnames[] = {
> +  "v0",  "v1",  "v2",  "v3",  "v4",  "v5",  "v6",
> +  "v7",  "v8",  "v9",  "v10", "v11", "v12", "v13",
> +  "v14", "v15", "v16", "v17", "v18", "v19", "v20",
> +  "v21", "v22", "v23", "v24", "v25", "v26", "v27",
> +  "v28", "v29", "v30", "v31"
> +};
> +
>  static const char * const riscv_excp_names[] = {
>      "misaligned_fetch",
>      "fault_fetch",
> @@ -422,7 +430,8 @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f, 
> int flags)
>  {
>      RISCVCPU *cpu = RISCV_CPU(cs);
>      CPURISCVState *env = &cpu->env;
> -    int i;
> +    int i, j;
> +    uint8_t *p;
>
>  #if !defined(CONFIG_USER_ONLY)
>      if (riscv_has_ext(env, RVH)) {
> @@ -506,6 +515,51 @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f, 
> int flags)
>              }
>          }
>      }
> +    if (riscv_has_ext(env, RVV) && (flags & CPU_DUMP_VPU)) {
> +        static const int dump_rvv_csrs[] = {
> +                    CSR_VSTART,
> +                    CSR_VXSAT,
> +                    CSR_VXRM,
> +                    CSR_VCSR,
> +                    CSR_VL,
> +                    CSR_VTYPE,
> +                    CSR_VLENB,
> +                };
> +        for (int i = 0; i < ARRAY_SIZE(dump_rvv_csrs); ++i) {
> +            int csrno = dump_rvv_csrs[i];
> +            target_ulong val = 0;
> +            RISCVException res = riscv_csrrw_debug(env, csrno, &val, 0, 0);
> +
> +            /*
> +             * Rely on the smode, hmode, etc, predicates within csr.c
> +             * to do the filtering of the registers that are present.
> +             */
> +            if (res == RISCV_EXCP_NONE) {
> +                qemu_fprintf(f, " %-8s " TARGET_FMT_lx "\n",
> +                             csr_ops[csrno].name, val);
> +            }
> +        }
> +        uint16_t vlenb = env_archcpu(env)->cfg.vlen >> 3;
> +
> +/*
> + * From vector_helper.c
> + * Note that vector data is stored in host-endian 64-bit chunks,
> + * so addressing bytes needs a host-endian fixup.
> + */
> +#if HOST_BIG_ENDIAN
> +#define BYTE(x)   ((x) ^ 7)
> +#else
> +#define BYTE(x)   (x)
> +#endif
> +        for (i = 0; i < 32; i++) {
> +            qemu_fprintf(f, " %-8s ", riscv_rvv_regnames[i]);
> +            p = (uint8_t *)env->vreg;
> +            for (j = vlenb - 1 ; j >= 0; j--) {
> +                qemu_fprintf(f, "%02x", *(p + i * vlenb + BYTE(j)));
> +            }
> +            qemu_fprintf(f, "\n");
> +        }
> +    }
>  }
>
>  static void riscv_cpu_set_pc(CPUState *cs, vaddr value)
> --
> 2.34.1
>
>