[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2] target/riscv: Add RVV registers to log
From: |
Alistair Francis |
Subject: |
Re: [PATCH v2] target/riscv: Add RVV registers to log |
Date: |
Wed, 5 Apr 2023 15:00:03 +1000 |
On Fri, Mar 10, 2023 at 12:01 AM Ivan Klokov <ivan.klokov@syntacore.com> wrote:
>
> Added QEMU option 'rvv' to add RISC-V RVV registers to log like regular regs.
>
> Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
> ---
> v2:
> - fix option name
> - fix byte ordering
> ---
> accel/tcg/cpu-exec.c | 3 +++
> include/hw/core/cpu.h | 2 ++
> include/qemu/log.h | 1 +
> target/riscv/cpu.c | 59 ++++++++++++++++++++++++++++++++++++++++++-
> util/log.c | 2 ++
> 5 files changed, 66 insertions(+), 1 deletion(-)
>
> diff --git a/accel/tcg/cpu-exec.c b/accel/tcg/cpu-exec.c
> index 56aaf58b9d..0dca69fccb 100644
> --- a/accel/tcg/cpu-exec.c
> +++ b/accel/tcg/cpu-exec.c
> @@ -319,6 +319,9 @@ static void log_cpu_exec(target_ulong pc, CPUState *cpu,
> #if defined(TARGET_I386)
> flags |= CPU_DUMP_CCOP;
> #endif
> + if (qemu_loglevel_mask(CPU_LOG_TB_VPU)) {
> + flags |= CPU_DUMP_VPU;
> + }
Can you separate these core changes into a seperate patch? It allows
others to see the changes and review them
> cpu_dump_state(cpu, logfile, flags);
> qemu_log_unlock(logfile);
> }
> diff --git a/include/hw/core/cpu.h b/include/hw/core/cpu.h
> index 75689bff02..7c9d25ff45 100644
> --- a/include/hw/core/cpu.h
> +++ b/include/hw/core/cpu.h
> @@ -545,11 +545,13 @@ GuestPanicInformation *cpu_get_crash_info(CPUState
> *cpu);
> * @CPU_DUMP_CODE:
> * @CPU_DUMP_FPU: dump FPU register state, not just integer
> * @CPU_DUMP_CCOP: dump info about TCG QEMU's condition code optimization
> state
> + * @CPU_DUMP_VPU: dump VPU registers
> */
> enum CPUDumpFlags {
> CPU_DUMP_CODE = 0x00010000,
> CPU_DUMP_FPU = 0x00020000,
> CPU_DUMP_CCOP = 0x00040000,
> + CPU_DUMP_VPU = 0x00080000,
> };
>
> /**
> diff --git a/include/qemu/log.h b/include/qemu/log.h
> index c5643d8dd5..df59bfabcd 100644
> --- a/include/qemu/log.h
> +++ b/include/qemu/log.h
> @@ -35,6 +35,7 @@ bool qemu_log_separate(void);
> /* LOG_STRACE is used for user-mode strace logging. */
> #define LOG_STRACE (1 << 19)
> #define LOG_PER_THREAD (1 << 20)
> +#define CPU_LOG_TB_VPU (1 << 21)
>
> /* Lock/unlock output. */
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index 5bc0005cc7..0b16c9c8e3 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -172,6 +172,14 @@ const char * const riscv_fpr_regnames[] = {
> "f30/ft10", "f31/ft11"
> };
>
> +const char * const riscv_rvv_regnames[] = {
> + "v0", "v1", "v2", "v3", "v4", "v5", "v6",
> + "v7", "v8", "v9", "v10", "v11", "v12", "v13",
> + "v14", "v15", "v16", "v17", "v18", "v19", "v20",
> + "v21", "v22", "v23", "v24", "v25", "v26", "v27",
> + "v28", "v29", "v30", "v31"
> +};
> +
> static const char * const riscv_excp_names[] = {
> "misaligned_fetch",
> "fault_fetch",
> @@ -422,7 +430,8 @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f,
> int flags)
> {
> RISCVCPU *cpu = RISCV_CPU(cs);
> CPURISCVState *env = &cpu->env;
> - int i;
> + int i, j;
> + uint8_t *p;
>
> #if !defined(CONFIG_USER_ONLY)
> if (riscv_has_ext(env, RVH)) {
> @@ -506,6 +515,54 @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f,
> int flags)
> }
> }
> }
> + if (riscv_has_ext(env, RVV)) {
> + if (flags & CPU_DUMP_VPU) {
You can just combine these into a single statement to reduce the indentation
> +
> + static const int dump_rvv_csrs[] = {
> + CSR_VSTART,
> + CSR_VXSAT,
> + CSR_VXRM,
> + CSR_VCSR,
> + CSR_VL,
> + CSR_VTYPE,
> + CSR_VLENB,
> + };
> + for (int i = 0; i < ARRAY_SIZE(dump_rvv_csrs); ++i) {
> + int csrno = dump_rvv_csrs[i];
> + target_ulong val = 0;
> + RISCVException res = riscv_csrrw_debug(env, csrno, &val, 0,
> 0);
> +
> + /*
> + * Rely on the smode, hmode, etc, predicates within csr.c
> + * to do the filtering of the registers that are present.
> + */
> + if (res == RISCV_EXCP_NONE) {
> + qemu_fprintf(f, " %-8s " TARGET_FMT_lx "\n",
> + csr_ops[csrno].name, val);
> + }
> + }
> + uint16_t vlenb = env_archcpu(env)->cfg.vlen >> 3;
> +
> +/*
> + * From vector_helper.c
> + * Note that vector data is stored in host-endian 64-bit chunks,
> + * so addressing bytes needs a host-endian fixup.
> + */
> +#if HOST_BIG_ENDIAN
> +#define BYTE(x) ((x) ^ 7)
> +#else
> +#define BYTE(x) (x)
> +#endif
> + for (i = 0; i < 32; i++) {
> + qemu_fprintf(f, " %-8s ", riscv_rvv_regnames[i]);
> + p = (uint8_t *)env->vreg;
> + for (j = vlenb - 1 ; j >= 0; j--) {
> + qemu_fprintf(f, "%02x", *(p + i * vlenb + BYTE(j)));
> + }
> + qemu_fprintf(f, "\n");
> + }
> + }
> + }
> }
>
> static void riscv_cpu_set_pc(CPUState *cs, vaddr value)
> diff --git a/util/log.c b/util/log.c
> index 7837ff9917..93dccee7b8 100644
> --- a/util/log.c
> +++ b/util/log.c
> @@ -495,6 +495,8 @@ const QEMULogItem qemu_log_items[] = {
> "log every user-mode syscall, its input, and its result" },
> { LOG_PER_THREAD, "tid",
> "open a separate log file per thread; filename must contain '%d'" },
> + { CPU_LOG_TB_VPU, "vpu",
> + "include VPU registers in the 'cpu' logging" },
Overall looks fine to me, I would like an Ack from others about adding
a new log item though
Alistair
> { 0, NULL, NULL },
> };
>
> --
> 2.34.1
>
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [PATCH v2] target/riscv: Add RVV registers to log,
Alistair Francis <=