qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL 11/24] target/s390x: Handle LGRL from non-aligned addresses


From: Thomas Huth
Subject: [PULL 11/24] target/s390x: Handle LGRL from non-aligned addresses
Date: Mon, 20 Mar 2023 14:03:17 +0100

From: Ilya Leoshkevich <iii@linux.ibm.com>

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 target/s390x/tcg/insn-data.h.inc | 6 +++---
 target/s390x/tcg/translate.c     | 3 ++-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/target/s390x/tcg/insn-data.h.inc b/target/s390x/tcg/insn-data.h.inc
index 6fe8ca5143..d439d80350 100644
--- a/target/s390x/tcg/insn-data.h.inc
+++ b/target/s390x/tcg/insn-data.h.inc
@@ -414,7 +414,7 @@
     C(0xe358, LY,      RXY_a, LD,  0, a2, new, r1_32, ld32s, 0)
     C(0xb904, LGR,     RRE,   Z,   0, r2_o, 0, r1, mov2, 0)
     C(0xb914, LGFR,    RRE,   Z,   0, r2_32s, 0, r1, mov2, 0)
-    C(0xe304, LG,      RXY_a, Z,   0, a2, r1, 0, ld64, 0)
+    D(0xe304, LG,      RXY_a, Z,   0, a2, r1, 0, ld64, 0, 0)
     C(0xe314, LGF,     RXY_a, Z,   0, a2, r1, 0, ld32s, 0)
     F(0x2800, LDR,     RR_a,  Z,   0, f2, 0, f1, mov2, 0, IF_AFP1 | IF_AFP2)
     F(0x6800, LD,      RX_a,  Z,   0, m2_64, 0, f1, mov2, 0, IF_AFP1)
@@ -427,7 +427,7 @@
     C(0xc001, LGFI,    RIL_a, EI,  0, i2, 0, r1, mov2, 0)
 /* LOAD RELATIVE LONG */
     C(0xc40d, LRL,     RIL_b, GIE, 0, ri2, new, r1_32, ld32s, 0)
-    C(0xc408, LGRL,    RIL_b, GIE, 0, ri2, r1, 0, ld64, 0)
+    D(0xc408, LGRL,    RIL_b, GIE, 0, ri2, r1, 0, ld64, 0, MO_ALIGN)
     C(0xc40c, LGFRL,   RIL_b, GIE, 0, ri2, r1, 0, ld32s, 0)
 /* LOAD ADDRESS */
     C(0x4100, LA,      RX_a,  Z,   0, a2, 0, r1, mov2, 0)
@@ -457,7 +457,7 @@
     C(0xb902, LTGR,    RRE,   Z,   0, r2_o, 0, r1, mov2, s64)
     C(0xb912, LTGFR,   RRE,   Z,   0, r2_32s, 0, r1, mov2, s64)
     C(0xe312, LT,      RXY_a, EI,  0, a2, new, r1_32, ld32s, s64)
-    C(0xe302, LTG,     RXY_a, EI,  0, a2, r1, 0, ld64, s64)
+    D(0xe302, LTG,     RXY_a, EI,  0, a2, r1, 0, ld64, s64, 0)
     C(0xe332, LTGF,    RXY_a, GIE, 0, a2, r1, 0, ld32s, s64)
     F(0xb302, LTEBR,   RRE,   Z,   0, e2, 0, cond_e1e2, mov2, f32, IF_BFP)
     F(0xb312, LTDBR,   RRE,   Z,   0, f2, 0, f1, mov2, f64, IF_BFP)
diff --git a/target/s390x/tcg/translate.c b/target/s390x/tcg/translate.c
index a6d81ed16b..e76f05f83b 100644
--- a/target/s390x/tcg/translate.c
+++ b/target/s390x/tcg/translate.c
@@ -2782,7 +2782,8 @@ static DisasJumpType op_ld32u(DisasContext *s, DisasOps 
*o)
 
 static DisasJumpType op_ld64(DisasContext *s, DisasOps *o)
 {
-    tcg_gen_qemu_ld64(o->out, o->in2, get_mem_index(s));
+    tcg_gen_qemu_ld_i64(o->out, o->in2, get_mem_index(s),
+                        MO_TEUQ | s->insn->data);
     return DISAS_NEXT;
 }
 
-- 
2.31.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]