From: Bernhard Beschow <shentey@gmail.com>
The real VIA south bridges implement a PCI IRQ router which is configured
by the BIOS or the OS. In order to respect these configurations, QEMU
needs to implement it as well.
Note: The implementation was taken from piix4_set_irq() in hw/isa/piix4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
[balaton: declare gpio inputs instead of changing pci bus irqs so it can
be connected in board code; remove some empty lines]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
---
hw/isa/vt82c686.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index 3f9bd0c04d..4025f9bcdc 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -604,6 +604,44 @@ static void via_isa_request_i8259_irq(void *opaque, int
irq, int level)
qemu_set_irq(s->cpu_intr, level);
}
+static int via_isa_get_pci_irq(const ViaISAState *s, int irq_num)
+{
+ switch (irq_num) {
+ case 0:
+ return s->dev.config[0x55] >> 4;
+ case 1:
+ return s->dev.config[0x56] & 0xf;
+ case 2:
+ return s->dev.config[0x56] >> 4;
+ case 3:
+ return s->dev.config[0x57] >> 4;
+ }
+ return 0;
+}
+
+static void via_isa_set_pci_irq(void *opaque, int irq_num, int level)
+{
+ ViaISAState *s = opaque;
+ PCIBus *bus = pci_get_bus(&s->dev);
+ int pic_irq;
+
+ /* now we change the pic irq level according to the via irq mappings */
+ /* XXX: optimize */
+ pic_irq = via_isa_get_pci_irq(s, irq_num);
+ if (pic_irq < ISA_NUM_IRQS) {
+ int i, pic_level;
+
+ /* The pic level is the logical OR of all the PCI irqs mapped to it. */
+ pic_level = 0;
+ for (i = 0; i < PCI_NUM_PINS; i++) {
+ if (pic_irq == via_isa_get_pci_irq(s, i)) {
+ pic_level |= pci_bus_get_irq_level(bus, i);
+ }
+ }
+ qemu_set_irq(s->isa_irqs[pic_irq], pic_level);
+ }
+}
+
static void via_isa_realize(PCIDevice *d, Error **errp)
{
ViaISAState *s = VIA_ISA(d);
@@ -614,6 +652,7 @@ static void via_isa_realize(PCIDevice *d, Error **errp)
int i;
qdev_init_gpio_out(dev, &s->cpu_intr, 1);
+ qdev_init_gpio_in_named(dev, via_isa_set_pci_irq, "pirq", PCI_NUM_PINS);