[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 04/11] qapi/migration: Introduce x-vcpu-dirty-limit-period
From: |
Peter Xu |
Subject: |
Re: [PATCH v2 04/11] qapi/migration: Introduce x-vcpu-dirty-limit-period parameter |
Date: |
Tue, 29 Nov 2022 17:49:02 -0500 |
On Mon, Nov 21, 2022 at 11:26:36AM -0500, huangy81@chinatelecom.cn wrote:
> From: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
>
> Introduce "x-vcpu-dirty-limit-period" migration experimental
> parameter, which is in the range of 1 to 1000ms and used to
> make dirtyrate calculation period configurable.
>
> Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
> ---
> migration/migration.c | 26 ++++++++++++++++++++++++++
> monitor/hmp-cmds.c | 8 ++++++++
> qapi/migration.json | 34 +++++++++++++++++++++++++++-------
> 3 files changed, 61 insertions(+), 7 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index 739bb68..701267c 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -116,6 +116,8 @@
> #define DEFAULT_MIGRATE_ANNOUNCE_ROUNDS 5
> #define DEFAULT_MIGRATE_ANNOUNCE_STEP 100
>
> +#define DEFAULT_MIGRATE_VCPU_DIRTY_LIMIT_PERIOD 500 /* ms */
> +
> static NotifierList migration_state_notifiers =
> NOTIFIER_LIST_INITIALIZER(migration_state_notifiers);
>
> @@ -963,6 +965,9 @@ MigrationParameters *qmp_query_migrate_parameters(Error
> **errp)
> s->parameters.block_bitmap_mapping);
> }
>
> + params->has_x_vcpu_dirty_limit_period = true;
> + params->x_vcpu_dirty_limit_period =
> s->parameters.x_vcpu_dirty_limit_period;
> +
> return params;
> }
>
> @@ -1564,6 +1569,15 @@ static bool migrate_params_check(MigrationParameters
> *params, Error **errp)
> }
> #endif
>
> + if (params->has_x_vcpu_dirty_limit_period &&
> + (params->x_vcpu_dirty_limit_period < 1 ||
> + params->x_vcpu_dirty_limit_period > 1000)) {
> + error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
> + "x_vcpu_dirty_limit_period",
> + "is invalid, it must be in the range of 1 to 1000 ms");
> + return false;
> + }
> +
> return true;
> }
>
> @@ -1663,6 +1677,10 @@ static void
> migrate_params_test_apply(MigrateSetParameters *params,
> dest->has_block_bitmap_mapping = true;
> dest->block_bitmap_mapping = params->block_bitmap_mapping;
> }
> +
> + if (params->has_x_vcpu_dirty_limit_period) {
> + dest->x_vcpu_dirty_limit_period = params->x_vcpu_dirty_limit_period;
> + }
> }
>
> static void migrate_params_apply(MigrateSetParameters *params, Error **errp)
> @@ -1785,6 +1803,10 @@ static void migrate_params_apply(MigrateSetParameters
> *params, Error **errp)
> QAPI_CLONE(BitmapMigrationNodeAliasList,
> params->block_bitmap_mapping);
> }
> + if (params->has_x_vcpu_dirty_limit_period) {
> + s->parameters.x_vcpu_dirty_limit_period =
> + params->x_vcpu_dirty_limit_period;
> + }
> }
>
> void qmp_migrate_set_parameters(MigrateSetParameters *params, Error **errp)
> @@ -4386,6 +4408,9 @@ static Property migration_properties[] = {
> DEFINE_PROP_STRING("tls-creds", MigrationState, parameters.tls_creds),
> DEFINE_PROP_STRING("tls-hostname", MigrationState,
> parameters.tls_hostname),
> DEFINE_PROP_STRING("tls-authz", MigrationState, parameters.tls_authz),
> + DEFINE_PROP_UINT64("x-vcpu-dirty-limit-period", MigrationState,
> + parameters.x_vcpu_dirty_limit_period,
> + DEFAULT_MIGRATE_VCPU_DIRTY_LIMIT_PERIOD),
>
> /* Migration capabilities */
> DEFINE_PROP_MIG_CAP("x-xbzrle", MIGRATION_CAPABILITY_XBZRLE),
> @@ -4477,6 +4502,7 @@ static void migration_instance_init(Object *obj)
> params->has_tls_creds = true;
> params->has_tls_hostname = true;
> params->has_tls_authz = true;
> + params->has_x_vcpu_dirty_limit_period = true;
>
> qemu_sem_init(&ms->postcopy_pause_sem, 0);
> qemu_sem_init(&ms->postcopy_pause_rp_sem, 0);
> diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
> index 01b789a..a3170ca 100644
> --- a/monitor/hmp-cmds.c
> +++ b/monitor/hmp-cmds.c
> @@ -513,6 +513,10 @@ void hmp_info_migrate_parameters(Monitor *mon, const
> QDict *qdict)
> }
> }
> }
> +
> + monitor_printf(mon, "%s: %" PRIu64 " ms\n",
> +
> MigrationParameter_str(MIGRATION_PARAMETER_X_VCPU_DIRTY_LIMIT_PERIOD),
> + params->x_vcpu_dirty_limit_period);
> }
>
> qapi_free_MigrationParameters(params);
> @@ -1332,6 +1336,10 @@ void hmp_migrate_set_parameter(Monitor *mon, const
> QDict *qdict)
> error_setg(&err, "The block-bitmap-mapping parameter can only be set
> "
> "through QMP");
> break;
> + case MIGRATION_PARAMETER_X_VCPU_DIRTY_LIMIT_PERIOD:
> + p->has_x_vcpu_dirty_limit_period = true;
> + visit_type_size(v, param, &p->x_vcpu_dirty_limit_period, &err);
> + break;
> default:
> assert(0);
> }
> diff --git a/qapi/migration.json b/qapi/migration.json
> index 88ecf86..5175779 100644
> --- a/qapi/migration.json
> +++ b/qapi/migration.json
> @@ -776,8 +776,13 @@
> # block device name if there is one, and to their
> node name
> # otherwise. (Since 5.2)
> #
> +# @x-vcpu-dirty-limit-period: Periodic time (ms) of dirty limit during live
> migration.
> +# Should be in the range 1 to 1000ms, defaults
> to 500ms.
> +# (Since 7.1)
Not 7.1 anymore but 7.3. Yeah a bit sad.
> +#
> # Features:
> -# @unstable: Member @x-checkpoint-delay is experimental.
> +# @unstable: Member @x-checkpoint-delay and @x-vcpu-dirty-limit-period
> +# are experimental.
> #
> # Since: 2.4
> ##
> @@ -795,8 +800,9 @@
> 'multifd-channels',
> 'xbzrle-cache-size', 'max-postcopy-bandwidth',
> 'max-cpu-throttle', 'multifd-compression',
> - 'multifd-zlib-level' ,'multifd-zstd-level',
> - 'block-bitmap-mapping' ] }
> + 'multifd-zlib-level', 'multifd-zstd-level',
> + 'block-bitmap-mapping',
> + { 'name': 'x-vcpu-dirty-limit-period', 'features': ['unstable'] }
> ] }
>
> ##
> # @MigrateSetParameters:
> @@ -941,8 +947,13 @@
> # block device name if there is one, and to their
> node name
> # otherwise. (Since 5.2)
> #
> +# @x-vcpu-dirty-limit-period: Periodic time (ms) of dirty limit during live
> migration.
> +# Should be in the range 1 to 1000ms, defaults
> to 500ms.
> +# (Since 7.1)
Same here.
> +#
> # Features:
> -# @unstable: Member @x-checkpoint-delay is experimental.
> +# @unstable: Member @x-checkpoint-delay and @x-vcpu-dirty-limit-period
> +# are experimental.
> #
> # Since: 2.4
> ##
> @@ -976,7 +987,9 @@
> '*multifd-compression': 'MultiFDCompression',
> '*multifd-zlib-level': 'uint8',
> '*multifd-zstd-level': 'uint8',
> - '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
> + '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ],
> + '*x-vcpu-dirty-limit-period': { 'type': 'uint64',
> + 'features': [ 'unstable' ] } } }
>
> ##
> # @migrate-set-parameters:
> @@ -1141,8 +1154,13 @@
> # block device name if there is one, and to their
> node name
> # otherwise. (Since 5.2)
> #
> +# @x-vcpu-dirty-limit-period: Periodic time (ms) of dirty limit during live
> migration.
> +# Should be in the range 1 to 1000ms, defaults
> to 500ms.
> +# (Since 7.1)
Same here.
> +#
> # Features:
> -# @unstable: Member @x-checkpoint-delay is experimental.
> +# @unstable: Member @x-checkpoint-delay and @x-vcpu-dirty-limit-period
> +# are experimental.
> #
> # Since: 2.4
> ##
> @@ -1174,7 +1192,9 @@
> '*multifd-compression': 'MultiFDCompression',
> '*multifd-zlib-level': 'uint8',
> '*multifd-zstd-level': 'uint8',
> - '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
> + '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ],
> + '*x-vcpu-dirty-limit-period': { 'type': 'uint64',
> + 'features': [ 'unstable' ] } } }
>
> ##
> # @query-migrate-parameters:
> --
> 1.8.3.1
>
>
--
Peter Xu
- [PATCH v2 00/11] migration: introduce dirtylimit capability, huangy81, 2022/11/21
- [PATCH v2 01/11] dirtylimit: Fix overflow when computing MB, huangy81, 2022/11/21
- [PATCH v2 02/11] softmmu/dirtylimit: Add parameter check for hmp "set_vcpu_dirty_limit", huangy81, 2022/11/21
- [PATCH v2 03/11] kvm-all: Do not allow reap vcpu dirty ring buffer if not ready, huangy81, 2022/11/21
- [PATCH v2 05/11] qapi/migration: Introduce vcpu-dirty-limit parameters, huangy81, 2022/11/21
- [PATCH v2 06/11] migration: Introduce dirty-limit capability, huangy81, 2022/11/21
- [PATCH v2 08/11] migration: Export dirty-limit time info, huangy81, 2022/11/21
- [PATCH v2 07/11] migration: Implement dirty-limit convergence algo, huangy81, 2022/11/21
- [PATCH v2 04/11] qapi/migration: Introduce x-vcpu-dirty-limit-period parameter, huangy81, 2022/11/21
- Re: [PATCH v2 04/11] qapi/migration: Introduce x-vcpu-dirty-limit-period parameter,
Peter Xu <=
- [PATCH v2 09/11] tests: Add migration dirty-limit capability test, huangy81, 2022/11/21
- [PATCH v2 11/11] tests/migration: Introduce dirty-limit into guestperf, huangy81, 2022/11/21
- [PATCH v2 10/11] tests/migration: Introduce dirty-ring-size option into guestperf, huangy81, 2022/11/21