[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 53/62] ppc4xx_sdram: Generalise bank setup
From: |
Daniel Henrique Barboza |
Subject: |
[PULL 53/62] ppc4xx_sdram: Generalise bank setup |
Date: |
Fri, 28 Oct 2022 13:39:42 -0300 |
From: BALATON Zoltan <balaton@eik.bme.hu>
Currently only base and size are set on initial bank creation and bcr
value is computed on mapping the region. Set bcr at init so the bcr
encoding method becomes local to the controller model and mapping and
unmapping can operate on the bank so it can be shared between
different controller models. This patch converts the DDR2 controller.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id:
<51b957b4b2d714a1072aa2589b979e08411640df.1666194485.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
hw/ppc/ppc4xx_sdram.c | 91 ++++++++++++++++++++++---------------------
hw/ppc/trace-events | 1 +
2 files changed, 48 insertions(+), 44 deletions(-)
diff --git a/hw/ppc/ppc4xx_sdram.c b/hw/ppc/ppc4xx_sdram.c
index 4bc53c8f01..63a33b8fd4 100644
--- a/hw/ppc/ppc4xx_sdram.c
+++ b/hw/ppc/ppc4xx_sdram.c
@@ -105,6 +105,7 @@ static void ppc4xx_sdram_banks(MemoryRegion *ram, int
nr_banks,
static void sdram_bank_map(Ppc4xxSdramBank *bank)
{
+ trace_ppc4xx_sdram_map(bank->base, bank->size);
memory_region_init(&bank->container, NULL, "sdram-container", bank->size);
memory_region_add_subregion(&bank->container, 0, &bank->ram);
memory_region_add_subregion(get_system_memory(), bank->base,
@@ -113,11 +114,26 @@ static void sdram_bank_map(Ppc4xxSdramBank *bank)
static void sdram_bank_unmap(Ppc4xxSdramBank *bank)
{
+ trace_ppc4xx_sdram_unmap(bank->base, bank->size);
memory_region_del_subregion(get_system_memory(), &bank->container);
memory_region_del_subregion(&bank->container, &bank->ram);
object_unparent(OBJECT(&bank->container));
}
+static void sdram_bank_set_bcr(Ppc4xxSdramBank *bank, uint32_t bcr,
+ hwaddr base, hwaddr size, int enabled)
+{
+ if (memory_region_is_mapped(&bank->container)) {
+ sdram_bank_unmap(bank);
+ }
+ bank->bcr = bcr;
+ bank->base = base;
+ bank->size = size;
+ if (enabled && (bcr & 1)) {
+ sdram_bank_map(bank);
+ }
+}
+
enum {
SDRAM0_CFGADDR = 0x010,
SDRAM0_CFGDATA = 0x011,
@@ -455,6 +471,8 @@ void ppc4xx_sdram_ddr_enable(Ppc4xxSdramDdrState *s)
/*****************************************************************************/
/* DDR2 SDRAM controller */
+#define SDRAM_DDR2_BCR_MASK 0xffe0ffc1
+
enum {
SDRAM_R0BAS = 0x40,
SDRAM_R1BAS,
@@ -528,48 +546,6 @@ static hwaddr sdram_ddr2_size(uint32_t bcr)
return size;
}
-static void sdram_ddr2_set_bcr(Ppc4xxSdramDdr2State *sdram, int i,
- uint32_t bcr, int enabled)
-{
- if (sdram->bank[i].bcr & 1) {
- /* First unmap RAM if enabled */
- trace_ppc4xx_sdram_unmap(sdram_ddr2_base(sdram->bank[i].bcr),
- sdram_ddr2_size(sdram->bank[i].bcr));
- sdram_bank_unmap(&sdram->bank[i]);
- }
- sdram->bank[i].bcr = bcr & 0xffe0ffc1;
- if (enabled && (bcr & 1)) {
- trace_ppc4xx_sdram_map(sdram_ddr2_base(bcr), sdram_ddr2_size(bcr));
- sdram_bank_map(&sdram->bank[i]);
- }
-}
-
-static void sdram_ddr2_map_bcr(Ppc4xxSdramDdr2State *sdram)
-{
- int i;
-
- for (i = 0; i < sdram->nbanks; i++) {
- if (sdram->bank[i].size) {
- sdram_ddr2_set_bcr(sdram, i,
- sdram_ddr2_bcr(sdram->bank[i].base,
- sdram->bank[i].size), 1);
- } else {
- sdram_ddr2_set_bcr(sdram, i, 0, 0);
- }
- }
-}
-
-static void sdram_ddr2_unmap_bcr(Ppc4xxSdramDdr2State *sdram)
-{
- int i;
-
- for (i = 0; i < sdram->nbanks; i++) {
- if (sdram->bank[i].size) {
- sdram_ddr2_set_bcr(sdram, i, sdram->bank[i].bcr & ~1, 0);
- }
- }
-}
-
static uint32_t sdram_ddr2_dcr_read(void *opaque, int dcrn)
{
Ppc4xxSdramDdr2State *s = opaque;
@@ -628,6 +604,7 @@ static uint32_t sdram_ddr2_dcr_read(void *opaque, int dcrn)
static void sdram_ddr2_dcr_write(void *opaque, int dcrn, uint32_t val)
{
Ppc4xxSdramDdr2State *s = opaque;
+ int i;
switch (dcrn) {
case SDRAM_R0BAS:
@@ -652,13 +629,25 @@ static void sdram_ddr2_dcr_write(void *opaque, int dcrn,
uint32_t val)
(val & SDRAM_DDR2_MCOPT2_DCEN)) {
trace_ppc4xx_sdram_enable("enable");
/* validate all RAM mappings */
- sdram_ddr2_map_bcr(s);
+ for (i = 0; i < s->nbanks; i++) {
+ if (s->bank[i].size) {
+ sdram_bank_set_bcr(&s->bank[i], s->bank[i].bcr,
+ s->bank[i].base, s->bank[i].size,
+ 1);
+ }
+ }
s->mcopt2 |= SDRAM_DDR2_MCOPT2_DCEN;
} else if ((s->mcopt2 & SDRAM_DDR2_MCOPT2_DCEN) &&
!(val & SDRAM_DDR2_MCOPT2_DCEN)) {
trace_ppc4xx_sdram_enable("disable");
/* invalidate all RAM mappings */
- sdram_ddr2_unmap_bcr(s);
+ for (i = 0; i < s->nbanks; i++) {
+ if (s->bank[i].size) {
+ sdram_bank_set_bcr(&s->bank[i], s->bank[i].bcr,
+ s->bank[i].base, s->bank[i].size,
+ 0);
+ }
+ }
s->mcopt2 &= ~SDRAM_DDR2_MCOPT2_DCEN;
}
break;
@@ -691,6 +680,7 @@ static void ppc4xx_sdram_ddr2_realize(DeviceState *dev,
Error **errp)
2 * GiB, 1 * GiB, 512 * MiB, 256 * MiB, 128 * MiB,
64 * MiB, 32 * MiB, 16 * MiB, 8 * MiB, 0
};
+ int i;
if (s->nbanks < 1 || s->nbanks > 4) {
error_setg(errp, "Invalid number of RAM banks");
@@ -701,6 +691,19 @@ static void ppc4xx_sdram_ddr2_realize(DeviceState *dev,
Error **errp)
return;
}
ppc4xx_sdram_banks(s->dram_mr, s->nbanks, s->bank, valid_bank_sizes);
+ for (i = 0; i < s->nbanks; i++) {
+ if (s->bank[i].size) {
+ s->bank[i].bcr = sdram_ddr2_bcr(s->bank[i].base, s->bank[i].size);
+ s->bank[i].bcr &= SDRAM_DDR2_BCR_MASK;
+ sdram_bank_set_bcr(&s->bank[i], s->bank[i].bcr,
+ s->bank[i].base, s->bank[i].size, 0);
+ } else {
+ sdram_bank_set_bcr(&s->bank[i], 0, 0, 0, 0);
+ }
+ trace_ppc4xx_sdram_init(sdram_ddr2_base(s->bank[i].bcr),
+ sdram_ddr2_size(s->bank[i].bcr),
+ s->bank[i].bcr);
+ }
ppc4xx_dcr_register(dcr, SDRAM0_CFGADDR,
s, &sdram_ddr2_dcr_read, &sdram_ddr2_dcr_write);
diff --git a/hw/ppc/trace-events b/hw/ppc/trace-events
index 956938ebcd..f670e8906c 100644
--- a/hw/ppc/trace-events
+++ b/hw/ppc/trace-events
@@ -179,3 +179,4 @@ ppc405ep_clocks_setup(const char *trace) "%s"
ppc4xx_sdram_enable(const char *trace) "%s SDRAM controller"
ppc4xx_sdram_unmap(uint64_t addr, uint64_t size) "Unmap RAM area 0x%" PRIx64 "
size 0x%" PRIx64
ppc4xx_sdram_map(uint64_t addr, uint64_t size) "Map RAM area 0x%" PRIx64 "
size 0x%" PRIx64
+ppc4xx_sdram_init(uint64_t base, uint64_t size, uint32_t bcr) "Init RAM area
0x%" PRIx64 " size 0x%" PRIx64 " bcr 0x%x"
--
2.37.3
- [PULL 43/62] target/ppc: add power-saving interrupt masking logic to p7_next_unmasked_interrupt, (continued)
- [PULL 43/62] target/ppc: add power-saving interrupt masking logic to p7_next_unmasked_interrupt, Daniel Henrique Barboza, 2022/10/28
- [PULL 40/62] target/ppc: remove unused interrupts from p7_deliver_interrupt, Daniel Henrique Barboza, 2022/10/28
- [PULL 44/62] target/ppc: remove ppc_store_lpcr from CONFIG_USER_ONLY builds, Daniel Henrique Barboza, 2022/10/28
- [PULL 45/62] target/ppc: introduce ppc_maybe_interrupt, Daniel Henrique Barboza, 2022/10/28
- [PULL 46/62] target/ppc: unify cpu->has_work based on cs->interrupt_request, Daniel Henrique Barboza, 2022/10/28
- [PULL 47/62] target/ppc: move the p*_interrupt_powersave methods to excp_helper.c, Daniel Henrique Barboza, 2022/10/28
- [PULL 48/62] ppc440_uc.c: Move DDR2 SDRAM controller model to ppc4xx_sdram.c, Daniel Henrique Barboza, 2022/10/28
- [PULL 49/62] ppc4xx_devs.c: Move DDR SDRAM controller model to ppc4xx_sdram.c, Daniel Henrique Barboza, 2022/10/28
- [PULL 50/62] ppc4xx_sdram: Move ppc4xx_sdram_banks() to ppc4xx_sdram.c, Daniel Henrique Barboza, 2022/10/28
- [PULL 51/62] ppc4xx_sdram: Use hwaddr for memory bank size, Daniel Henrique Barboza, 2022/10/28
- [PULL 53/62] ppc4xx_sdram: Generalise bank setup,
Daniel Henrique Barboza <=
- [PULL 52/62] ppc4xx_sdram: Rename local state variable for brevity, Daniel Henrique Barboza, 2022/10/28
- [PULL 54/62] ppc4xx_sdram: Convert DDR SDRAM controller to new bank handling, Daniel Henrique Barboza, 2022/10/28
- [PULL 55/62] ppc4xx_sdram: Add errp parameter to ppc4xx_sdram_banks(), Daniel Henrique Barboza, 2022/10/28
- [PULL 56/62] target/ppc: Add new PMC HFLAGS, Daniel Henrique Barboza, 2022/10/28
- [PULL 57/62] target/ppc: Increment PMC5 with inline insns, Daniel Henrique Barboza, 2022/10/28
- [PULL 58/62] docs/system/ppc/ppce500: Use qemu-system-ppc64 across the board(s), Daniel Henrique Barboza, 2022/10/28
- [PULL 59/62] hw/block/pflash_cfi0{1, 2}: Error out if device length isn't a power of two, Daniel Henrique Barboza, 2022/10/28
- [PULL 60/62] hw/sd/sdhci-internal: Unexport ESDHC defines, Daniel Henrique Barboza, 2022/10/28
- [PULL 61/62] hw/sd/sdhci: Rename ESDHC_* defines to USDHC_*, Daniel Henrique Barboza, 2022/10/28
- [PULL 62/62] hw/ppc/e500: Implement pflash handling, Daniel Henrique Barboza, 2022/10/28