[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 39/42] target/arm: Don't shift attrs in get_phys_addr_lpae
From: |
Richard Henderson |
Subject: |
[PATCH v3 39/42] target/arm: Don't shift attrs in get_phys_addr_lpae |
Date: |
Sat, 1 Oct 2022 09:23:15 -0700 |
Leave the upper and lower attributes in the place they originate
from in the descriptor. Shifting them around is confusing, since
one cannot read the bit numbers out of the manual. Also, new
attributes have been added which would alter the shifts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/ptw.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/target/arm/ptw.c b/target/arm/ptw.c
index 01a27b30fb..c68fd73617 100644
--- a/target/arm/ptw.c
+++ b/target/arm/ptw.c
@@ -1071,7 +1071,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t
address,
hwaddr descaddr, indexmask, indexmask_grainsize;
uint32_t tableattrs;
target_ulong page_size;
- uint32_t attrs;
+ uint64_t attrs;
int32_t stride;
int addrsize, inputsize, outputsize;
uint64_t tcr = regime_tcr(env, mmu_idx);
@@ -1341,49 +1341,48 @@ static bool get_phys_addr_lpae(CPUARMState *env,
uint64_t address,
descaddr &= ~(page_size - 1);
descaddr |= (address & (page_size - 1));
/* Extract attributes from the descriptor */
- attrs = extract64(descriptor, 2, 10)
- | (extract64(descriptor, 52, 12) << 10);
+ attrs = descriptor & (MAKE_64BIT_MASK(2, 10) | MAKE_64BIT_MASK(52, 12));
if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) {
/* Stage 2 table descriptors do not include any attribute fields */
goto skip_attrs;
}
/* Merge in attributes from table descriptors */
- attrs |= nstable << 3; /* NS */
+ attrs |= nstable << 5; /* NS */
guarded = extract64(descriptor, 50, 1); /* GP */
if (param.hpd) {
/* HPD disables all the table attributes except NSTable. */
goto skip_attrs;
}
- attrs |= extract32(tableattrs, 0, 2) << 11; /* XN, PXN */
+ attrs |= extract64(tableattrs, 0, 2) << 53; /* XN, PXN */
/*
* The sense of AP[1] vs APTable[0] is reversed, as APTable[0] == 1
* means "force PL1 access only", which means forcing AP[1] to 0.
*/
- attrs &= ~(extract32(tableattrs, 2, 1) << 4); /* !APT[0] => AP[1] */
- attrs |= extract32(tableattrs, 3, 1) << 5; /* APT[1] => AP[2] */
+ attrs &= ~(extract64(tableattrs, 2, 1) << 6); /* !APT[0] => AP[1] */
+ attrs |= extract32(tableattrs, 3, 1) << 7; /* APT[1] => AP[2] */
skip_attrs:
/*
* Here descaddr is the final physical address, and attributes
* are all in attrs.
*/
- if ((attrs & (1 << 8)) == 0) {
+ if ((attrs & (1 << 10)) == 0) {
/* Access flag */
fi->type = ARMFault_AccessFlag;
goto do_fault;
}
- ap = extract32(attrs, 4, 2);
+ ap = extract32(attrs, 6, 2);
if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) {
ns = mmu_idx == ARMMMUIdx_Stage2;
- xn = extract32(attrs, 11, 2);
+ xn = extract64(attrs, 54, 2);
result->f.prot = get_S2prot(env, ap, xn, s1_is_el0);
} else {
- ns = extract32(attrs, 3, 1);
- xn = extract32(attrs, 12, 1);
- pxn = extract32(attrs, 11, 1);
+ ns = extract32(attrs, 5, 1);
+ xn = extract64(attrs, 54, 1);
+ pxn = extract64(attrs, 53, 1);
result->f.prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn);
}
@@ -1408,10 +1407,10 @@ static bool get_phys_addr_lpae(CPUARMState *env,
uint64_t address,
if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) {
result->cacheattrs.is_s2_format = true;
- result->cacheattrs.attrs = extract32(attrs, 0, 4);
+ result->cacheattrs.attrs = extract32(attrs, 2, 4);
} else {
/* Index into MAIR registers for cache attributes */
- uint8_t attrindx = extract32(attrs, 0, 3);
+ uint8_t attrindx = extract32(attrs, 2, 3);
uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)];
assert(attrindx <= 7);
result->cacheattrs.is_s2_format = false;
@@ -1426,7 +1425,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t
address,
if (param.ds) {
result->cacheattrs.shareability = param.sh;
} else {
- result->cacheattrs.shareability = extract32(attrs, 6, 2);
+ result->cacheattrs.shareability = extract32(attrs, 8, 2);
}
result->f.phys_addr = descaddr;
--
2.34.1
- [PATCH v3 34/42] target/arm: Move be test for regime into S1TranslateResult, (continued)
- [PATCH v3 34/42] target/arm: Move be test for regime into S1TranslateResult, Richard Henderson, 2022/10/01
- [PATCH v3 35/42] target/arm: Move S1_ptw_translate outside arm_ld[lq]_ptw, Richard Henderson, 2022/10/01
- [PATCH v3 36/42] target/arm: Add ARMFault_UnsuppAtomicUpdate, Richard Henderson, 2022/10/01
- [PATCH v3 37/42] target/arm: Remove loop from get_phys_addr_lpae, Richard Henderson, 2022/10/01
- [PATCH v3 38/42] target/arm: Fix fault reporting in get_phys_addr_lpae, Richard Henderson, 2022/10/01
- [PATCH v3 39/42] target/arm: Don't shift attrs in get_phys_addr_lpae,
Richard Henderson <=
- [PATCH v3 40/42] target/arm: Consider GP an attribute in get_phys_addr_lpae, Richard Henderson, 2022/10/01
- [PATCH v3 41/42] target/arm: Implement FEAT_HAFDBS, Richard Henderson, 2022/10/01
[PATCH v3 42/42] target/arm: Use the max page size in a 2-stage ptw, Richard Henderson, 2022/10/01