qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v8 1/8] mm/memfd: Introduce userspace inaccessible memfd


From: Andy Lutomirski
Subject: Re: [PATCH v8 1/8] mm/memfd: Introduce userspace inaccessible memfd
Date: Wed, 21 Sep 2022 14:10:51 -0700
User-agent: Cyrus-JMAP/3.7.0-alpha0-935-ge4ccd4c47b-fm-20220914.001-ge4ccd4c4

(please excuse any formatting disasters.  my internet went out as I was 
composing this, and i did my best to rescue it.)

On Mon, Sep 19, 2022, at 12:10 PM, Sean Christopherson wrote:
> +Will, Marc and Fuad (apologies if I missed other pKVM folks)
>
> On Mon, Sep 19, 2022, David Hildenbrand wrote:
>> On 15.09.22 16:29, Chao Peng wrote:
>> > From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
>> > 
>> > KVM can use memfd-provided memory for guest memory. For normal userspace
>> > accessible memory, KVM userspace (e.g. QEMU) mmaps the memfd into its
>> > virtual address space and then tells KVM to use the virtual address to
>> > setup the mapping in the secondary page table (e.g. EPT).
>> > 
>> > With confidential computing technologies like Intel TDX, the
>> > memfd-provided memory may be encrypted with special key for special
>> > software domain (e.g. KVM guest) and is not expected to be directly
>> > accessed by userspace. Precisely, userspace access to such encrypted
>> > memory may lead to host crash so it should be prevented.
>> 
>> Initially my thaught was that this whole inaccessible thing is TDX specific
>> and there is no need to force that on other mechanisms. That's why I
>> suggested to not expose this to user space but handle the notifier
>> requirements internally.
>> 
>> IIUC now, protected KVM has similar demands. Either access (read/write) of
>> guest RAM would result in a fault and possibly crash the hypervisor (at
>> least not the whole machine IIUC).
>
> Yep.  The missing piece for pKVM is the ability to convert from shared 
> to private
> while preserving the contents, e.g. to hand off a large buffer 
> (hundreds of MiB)
> for processing in the protected VM.  Thoughts on this at the bottom.
>
>> > This patch introduces userspace inaccessible memfd (created with
>> > MFD_INACCESSIBLE). Its memory is inaccessible from userspace through
>> > ordinary MMU access (e.g. read/write/mmap) but can be accessed via
>> > in-kernel interface so KVM can directly interact with core-mm without
>> > the need to map the memory into KVM userspace.
>> 
>> With secretmem we decided to not add such "concept switch" flags and instead
>> use a dedicated syscall.
>>
>
> I have no personal preference whatsoever between a flag and a dedicated 
> syscall,
> but a dedicated syscall does seem like it would give the kernel a bit more
> flexibility.

The third option is a device node, e.g. /dev/kvm_secretmem or /dev/kvm_tdxmem 
or similar.  But if we need flags or other details in the future, maybe this 
isn't ideal.

>
>> What about memfd_inaccessible()? Especially, sealing and hugetlb are not
>> even supported and it might take a while to support either.
>
> Don't know about sealing, but hugetlb support for "inaccessible" memory 
> needs to
> come sooner than later.  "inaccessible" in quotes because we might want 
> to choose
> a less binary name, e.g. "restricted"?.
>
> Regarding pKVM's use case, with the shim approach I believe this can be done 
> by
> allowing userspace mmap() the "hidden" memfd, but with a ton of restrictions
> piled on top.
>
> My first thought was to make the uAPI a set of KVM ioctls so that KVM 
> could tightly
> tightly control usage without taking on too much complexity in the 
> kernel, but
> working through things, routing the behavior through the shim itself 
> might not be
> all that horrific.
>
> IIRC, we discarded the idea of allowing userspace to map the "private" 
> fd because
> things got too complex, but with the shim it doesn't seem _that_ bad.

What's the exact use case?  Is it just to pre-populate the memory?

>
> E.g. on the memfd side:
>
>   1. The entire memfd must be mapped, and at most one mapping is allowed, i.e.
>      mapping is all or nothing.
>
>   2. Acquiring a reference via get_pfn() is disallowed if there's a mapping 
> for
>      the restricted memfd.
>
>   3. Add notifier hooks to allow downstream users to further restrict things.
>
>   4. Disallow splitting VMAs, e.g. to force userspace to munmap() everything 
> in
>      one shot.
>
>   5. Require that there are no outstanding references at munmap().  Or if this
>      can't be guaranteed by userspace, maybe add some way for userspace to 
> wait
>      until it's ok to convert to private?  E.g. so that get_pfn() doesn't need
>      to do an expensive check every time.

Hmm.  I haven't looked at the code to see if this would really work, but I 
think this could be done more in line with how the rest of the kernel works by 
using the rmap infrastructure.  When the pKVM memfd is in not-yet-private mode, 
just let it be mmapped as usual (but don't allow any form of GUP or pinning).  
Then have an ioctl to switch to to shared mode that takes locks or sets flags 
so that no new faults can be serviced and does unmap_mapping_range.

As long as the shim arranges to have its own vm_ops, I don't immediately see 
any reason this can't work.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]