[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[RFC] hw/registerfields: add `FIELDx_1CLEAR()` macro
From: |
Wilfred Mallawa |
Subject: |
[RFC] hw/registerfields: add `FIELDx_1CLEAR()` macro |
Date: |
Thu, 1 Sep 2022 11:02:21 +1000 |
From: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Adds a helper macro that implements the `rw1c`
behaviour.
Ex:
uint32_t data = FIELD32_1CLEAR(val, REG, FIELD);
if the specified `FIELD` is set (single/multi bit all fields)
then the respective field is cleared and returned to `data`.
If ALL bits of the bitfield are not set, then no change and
val is returned.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
---
include/hw/registerfields.h | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/include/hw/registerfields.h b/include/hw/registerfields.h
index 1330ca77de..5a804f72e3 100644
--- a/include/hw/registerfields.h
+++ b/include/hw/registerfields.h
@@ -115,6 +115,34 @@
R_ ## reg ## _ ## field ## _LENGTH, _v.v); \
_d; })
+/* Get the max value (uint) discribed by `num_bits` bits */
+#define MAX_N_BITS(num_bits) ((1 << (num_bits)) - 1)
+
+/*
+ * Clear the specified field in reg_val if
+ * all field bits are set, else no changes made. Implements
+ * single/multi-bit `rw1c`
+ */
+#define FIELD8_1CLEAR(reg_val, reg, field) \
+ ((FIELD_EX8(reg_val, reg, field) == \
+ MAX_N_BITS(R_ ## reg ## _ ## field ## _LENGTH)) ? \
+ FIELD_DP8(reg_val, reg, field, 0x00) : reg_val)
+
+#define FIELD16_1CLEAR(reg_val, reg, field) \
+ ((FIELD_EX16(reg_val, reg, field) == \
+ MAX_N_BITS(R_ ## reg ## _ ## field ## _LENGTH)) ? \
+ FIELD_DP16(reg_val, reg, field, 0x00) : reg_val)
+
+#define FIELD32_1CLEAR(reg_val, reg, field) \
+ ((FIELD_EX32(reg_val, reg, field) == \
+ MAX_N_BITS(R_ ## reg ## _ ## field ## _LENGTH)) ? \
+ FIELD_DP32(reg_val, reg, field, 0x00) : reg_val)
+
+#define FIELD64_1CLEAR(reg_val, reg, field) \
+ ((FIELD_EX64(reg_val, reg, field) == \
+ MAX_N_BITS(R_ ## reg ## _ ## field ## _LENGTH)) ? \
+ FIELD_DP64(reg_val, reg, field, 0x00) : reg_val)
+
#define FIELD_SDP8(storage, reg, field, val) ({ \
struct { \
signed int v:R_ ## reg ## _ ## field ## _LENGTH; \
--
2.37.2
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [RFC] hw/registerfields: add `FIELDx_1CLEAR()` macro,
Wilfred Mallawa <=