[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 04/13] linux-user: Add pidfd_open(), pidfd_send_signal() and pidf
From: |
Helge Deller |
Subject: |
[PATCH 04/13] linux-user: Add pidfd_open(), pidfd_send_signal() and pidfd_getfd() syscalls |
Date: |
Fri, 26 Aug 2022 16:18:44 +0200 |
I noticed those were missing when running the glib2.0 testsuite.
Add the syscalls including the strace output.
Signed-off-by: Helge Deller <deller@gmx.de>
---
linux-user/strace.c | 28 ++++++++++++++++++++++++++++
linux-user/strace.list | 9 +++++++++
linux-user/syscall.c | 34 ++++++++++++++++++++++++++++++++++
3 files changed, 71 insertions(+)
diff --git a/linux-user/strace.c b/linux-user/strace.c
index e8c63aa4c2..86b2034c81 100644
--- a/linux-user/strace.c
+++ b/linux-user/strace.c
@@ -3316,6 +3316,34 @@ print_openat(CPUArchState *cpu_env, const struct
syscallname *name,
}
#endif
+#ifdef TARGET_NR_pidfd_send_signal
+static void
+print_pidfd_send_signal(CPUArchState *cpu_env, const struct syscallname *name,
+ abi_long arg0, abi_long arg1, abi_long arg2,
+ abi_long arg3, abi_long arg4, abi_long arg5)
+{
+ void *p;
+ target_siginfo_t uinfo;
+
+ print_syscall_prologue(name);
+ print_raw_param("%d", arg0, 0);
+ print_signal(arg1, 0);
+
+ p = lock_user(VERIFY_READ, arg2, sizeof(target_siginfo_t), 1);
+ if (p) {
+ get_target_siginfo(&uinfo, p);
+ print_siginfo(&uinfo);
+
+ unlock_user(p, arg2, 0);
+ } else {
+ print_pointer(arg2, 1);
+ }
+
+ print_raw_param("%u", arg3, 0);
+ print_syscall_epilogue(name);
+}
+#endif
+
#ifdef TARGET_NR_mq_unlink
static void
print_mq_unlink(CPUArchState *cpu_env, const struct syscallname *name,
diff --git a/linux-user/strace.list b/linux-user/strace.list
index 6e88da7fad..7a69152db7 100644
--- a/linux-user/strace.list
+++ b/linux-user/strace.list
@@ -1667,6 +1667,15 @@
#ifdef TARGET_NR_pipe2
{ TARGET_NR_pipe2, "pipe2", NULL, NULL, NULL },
#endif
+#ifdef TARGET_NR_pidfd_open
+{ TARGET_NR_pidfd_open, "pidfd_open", "%s(%d,%u)", NULL, NULL },
+#endif
+#ifdef TARGET_NR_pidfd_send_signal
+{ TARGET_NR_pidfd_send_signal, "pidfd_send_signal", NULL,
print_pidfd_send_signal, NULL },
+#endif
+#ifdef TARGET_NR_pidfd_getfd
+{ TARGET_NR_pidfd_getfd, "pidfd_getfd", "%s(%d,%d,%u)", NULL, NULL },
+#endif
#ifdef TARGET_NR_atomic_cmpxchg_32
{ TARGET_NR_atomic_cmpxchg_32, "atomic_cmpxchg_32", NULL, NULL, NULL },
#endif
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index f51c4fbabd..a1e6d4ad53 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -346,6 +346,16 @@ _syscall6(int,sys_futex,int *,uaddr,int,op,int,val,
_syscall6(int,sys_futex_time64,int *,uaddr,int,op,int,val,
const struct timespec *,timeout,int *,uaddr2,int,val3)
#endif
+#if defined(__NR_pidfd_open)
+_syscall2(int, pidfd_open, pid_t, pid, unsigned int, flags);
+#endif
+#if defined(__NR_pidfd_send_signal)
+_syscall4(int, pidfd_send_signal, int, pidfd, int, sig, siginfo_t *, info,
+ unsigned int, flags);
+#endif
+#if defined(__NR_pidfd_getfd)
+_syscall3(int, pidfd_getfd, int, pidfd, int, targetfd, unsigned int, flags);
+#endif
#define __NR_sys_sched_getaffinity __NR_sched_getaffinity
_syscall3(int, sys_sched_getaffinity, pid_t, pid, unsigned int, len,
unsigned long *, user_mask_ptr);
@@ -8686,6 +8696,30 @@ static abi_long do_syscall1(CPUArchState *cpu_env, int
num, abi_long arg1,
ret = do_open_by_handle_at(arg1, arg2, arg3);
fd_trans_unregister(ret);
return ret;
+#endif
+#if defined(TARGET_NR_pidfd_open)
+ case TARGET_NR_pidfd_open:
+ return get_errno(pidfd_open(arg1, arg2));
+#endif
+#if defined(TARGET_NR_pidfd_send_signal)
+ case TARGET_NR_pidfd_send_signal:
+ {
+ siginfo_t uinfo;
+
+ p = lock_user(VERIFY_READ, arg3, sizeof(target_siginfo_t), 1);
+ if (!p) {
+ return -TARGET_EFAULT;
+ }
+ target_to_host_siginfo(&uinfo, p);
+ unlock_user(p, arg3, 0);
+ ret = get_errno(pidfd_send_signal(arg1,
target_to_host_signal(arg2),
+ &uinfo, arg4));
+ }
+ return ret;
+#endif
+#if defined(TARGET_NR_pidfd_getfd)
+ case TARGET_NR_pidfd_getfd:
+ return get_errno(pidfd_getfd(arg1, arg2, arg3));
#endif
case TARGET_NR_close:
fd_trans_unregister(arg1);
--
2.37.1
- [PATCH 00/13] linux-user: Add more syscalls, enhance tracing & logging enhancements, Helge Deller, 2022/08/26
- [PATCH 03/13] linux-user: Add faccessat2() syscall, Helge Deller, 2022/08/26
- [PATCH 10/13] linux-user: Add strace for clock_nanosleep(), Helge Deller, 2022/08/26
- [PATCH 01/13] linux-user: Add missing signals in strace output, Helge Deller, 2022/08/26
- [PATCH 11/13] linux-user: Show timespec on strace for futex(), Helge Deller, 2022/08/26
- [PATCH 08/13] linux-user: Fix strace of chmod() if mode == 0, Helge Deller, 2022/08/26
- [PATCH 12/13] linux-user: Add close_range() syscall, Helge Deller, 2022/08/26
- [PATCH 02/13] linux-user: Add missing clock_gettime64() syscall strace, Helge Deller, 2022/08/26
- [PATCH 04/13] linux-user: Add pidfd_open(), pidfd_send_signal() and pidfd_getfd() syscalls,
Helge Deller <=
- [PATCH 07/13] linux-user/hppa: Dump IIR on register dump, Helge Deller, 2022/08/26
- [PATCH 05/13] linux-user: Log failing executable in EXCP_DUMP(), Helge Deller, 2022/08/26
- [PATCH 09/13] linux-user/hppa: Set TASK_UNMAPPED_BASE to 0xfa000000 for hppa arch, Helge Deller, 2022/08/26
- [PATCH 13/13] linux-user: Add parameters of getrandom() syscall for strace, Helge Deller, 2022/08/26
- [PATCH 06/13] linux-user/hppa: Use EXCP_DUMP() to show enhanced debug info, Helge Deller, 2022/08/26