On Mon, 22 Aug 2022 14:38:09 +0530
Ani Sinha <ani@anisinha.ca> wrote:
> Currently the bit 0 of the flags field of Root Port ATS capability reporting
> structure sub-table under the DMAR table is set to 1. This indicates ALL_PORTS,
> thus enabling ATS capability for all pcie roots without the ability to turn off
> ATS for some ports and leaving ATS on for others.
>
> This change clears the bit 0 of the flags field of the above structure and
> explicitly adds scopes for every pcie root port in the structure so that ATS
> is enabled for all of them. In future, we might add new attribite to the root
> ports so that we can selectively enable ATS for some and leave ATS off for
> others.
Thanks, it was worth a try,
unfortunately since we are shooting in dark this time it was a miss.
So I take it that even with this patch Windows still exhibited the issue?
Is it worth pushing the patch anyway?
> Signed-off-by: Ani Sinha <ani@anisinha.ca>
> Suggested-by: Michael Tsirkin <mst@redhat.com>
> ---
> hw/i386/acpi-build.c | 74 ++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 72 insertions(+), 2 deletions(-)
>
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index 0355bd3dda..9c5a555536 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -60,6 +60,7 @@
> #include "hw/i386/fw_cfg.h"
> #include "hw/i386/ich9.h"
> #include "hw/pci/pci_bus.h"
> +#include "hw/pci/pcie_port.h"
> #include "hw/pci-host/q35.h"
> #include "hw/i386/x86-iommu.h"
>
> @@ -2118,6 +2119,60 @@ dmar_host_bridges(Object *obj, void *opaque)
> return 0;
> }
>
> +/*
> + * Insert DMAR scope for PCIE root ports
> + */
> +static void
> +insert_pcie_root_port_scope(PCIBus *bus, PCIDevice *dev, void *opaque)
> +{
> + const size_t device_scope_size = 6 + 2;
> + /* device scope structure + 1 path entry */
> + GArray *scope_blob = opaque;
> +
> + /*
> + * We are only interested in PCIE root ports. We can extend
> + * this to check for specific properties of PCIE root ports and based
> + * on that remove some ports from having ATS capability.
> + */
> + if (!object_dynamic_cast(OBJECT(dev), TYPE_PCIE_ROOT_PORT)) {
> + return;
> + }
> +
> + /* Dmar Scope Type: 0x02 for all PCIE root ports */
> + build_append_int_noprefix(scope_blob, 0x02, 1);
> +
> + /* length */
> + build_append_int_noprefix(scope_blob, device_scope_size, 1);
> + /* reserved */
> + build_append_int_noprefix(scope_blob, 0, 2);
> + /* enumeration_id */
> + build_append_int_noprefix(scope_blob, 0, 1);
> + /* bus */
> + build_append_int_noprefix(scope_blob, pci_bus_num(bus), 1);
> + /* device */
> + build_append_int_noprefix(scope_blob, PCI_SLOT(dev->devfn), 1);
> + /* function */
> + build_append_int_noprefix(scope_blob, PCI_FUNC(dev->devfn), 1);
> +}
> +
> +/* For a given PCI host bridge, walk and insert DMAR scope */
> +static int
> +dmar_pcie_root_ports(Object *obj, void *opaque)
> +{
> + GArray *scope_blob = opaque;
> +
> + if (object_dynamic_cast(obj, TYPE_PCI_HOST_BRIDGE)) {
> + PCIBus *bus = PCI_HOST_BRIDGE(obj)->bus;
> +
> + if (bus && !pci_bus_bypass_iommu(bus)) {
> + pci_for_each_device_under_bus(bus, insert_pcie_root_port_scope,
> + scope_blob);
> + }
> + }
> +
> + return 0;
> +}
> +
> /*
> * Intel ® Virtualization Technology for Directed I/O
> * Architecture Specification. Revision 3.3
> @@ -2190,11 +2245,26 @@ build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id,
>
> if (iommu->dt_supported) {
> /* 8.5 Root Port ATS Capability Reporting Structure */
> + /*
> + * A PCI bus walk, for each PCIE root port.
> + * Since we did not enable ALL_PORTS bit in the flags above, we
> + * need to add the scope for each pcie root port explicitly
> + * that are attached to bus0 with iommu enabled.
> + */
> + scope_blob = g_array_new(false, true, 1);
> + object_child_foreach_recursive(object_get_root(),
> + dmar_pcie_root_ports, scope_blob);
> +
> build_append_int_noprefix(table_data, 2, 2); /* Type */
> - build_append_int_noprefix(table_data, 8, 2); /* Length */
> - build_append_int_noprefix(table_data, 1 /* ALL_PORTS */, 1); /* Flags */
> + build_append_int_noprefix(table_data,
> + 8 + scope_blob->len, 2); /* Length */
> + build_append_int_noprefix(table_data, 0, 1); /* Flags */
> build_append_int_noprefix(table_data, 0, 1); /* Reserved */
> build_append_int_noprefix(table_data, 0, 2); /* Segment Number */
> +
> + /* now add the scope to the sub-table */
> + g_array_append_vals(table_data, scope_blob->data, scope_blob->len);
> + g_array_free(scope_blob, true);
> }
>
> acpi_table_end(linker, &table);