[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 17/31] hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device
From: |
BALATON Zoltan |
Subject: |
[PATCH v2 17/31] hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device |
Date: |
Wed, 17 Aug 2022 17:08:35 +0200 (CEST) |
Make ppc-uic a subclass of ppc4xx-dcr-device which will handle the cpu
link and make it uniform with the other PPC4xx devices.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
---
hw/intc/ppc-uic.c | 26 ++++++--------------------
hw/ppc/ppc405_uc.c | 6 ++----
hw/ppc/ppc440_bamboo.c | 7 ++-----
hw/ppc/ppc4xx_devs.c | 1 -
hw/ppc/sam460ex.c | 17 +++++++----------
hw/ppc/virtex_ml507.c | 7 ++-----
include/hw/intc/ppc-uic.h | 6 ++----
7 files changed, 21 insertions(+), 49 deletions(-)
diff --git a/hw/intc/ppc-uic.c b/hw/intc/ppc-uic.c
index 60013f2dde..dcf5de5d43 100644
--- a/hw/intc/ppc-uic.c
+++ b/hw/intc/ppc-uic.c
@@ -25,11 +25,8 @@
#include "qemu/osdep.h"
#include "hw/intc/ppc-uic.h"
#include "hw/irq.h"
-#include "cpu.h"
-#include "hw/ppc/ppc.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
-#include "qapi/error.h"
enum {
DCR_UICSR = 0x000,
@@ -105,10 +102,9 @@ static void ppcuic_trigger_irq(PPCUIC *uic)
static void ppcuic_set_irq(void *opaque, int irq_num, int level)
{
- PPCUIC *uic;
+ PPCUIC *uic = opaque;
uint32_t mask, sr;
- uic = opaque;
mask = 1U << (31 - irq_num);
LOG_UIC("%s: irq %d level %d uicsr %08" PRIx32
" mask %08" PRIx32 " => %08" PRIx32 " %08" PRIx32 "\n",
@@ -144,10 +140,9 @@ static void ppcuic_set_irq(void *opaque, int irq_num, int
level)
static uint32_t dcr_read_uic(void *opaque, int dcrn)
{
- PPCUIC *uic;
+ PPCUIC *uic = opaque;
uint32_t ret;
- uic = opaque;
dcrn -= uic->dcr_base;
switch (dcrn) {
case DCR_UICSR:
@@ -192,9 +187,8 @@ static uint32_t dcr_read_uic(void *opaque, int dcrn)
static void dcr_write_uic(void *opaque, int dcrn, uint32_t val)
{
- PPCUIC *uic;
+ PPCUIC *uic = opaque;
- uic = opaque;
dcrn -= uic->dcr_base;
LOG_UIC("%s: dcr %d val 0x%x\n", __func__, dcrn, val);
switch (dcrn) {
@@ -251,19 +245,12 @@ static void ppc_uic_reset(DeviceState *dev)
static void ppc_uic_realize(DeviceState *dev, Error **errp)
{
PPCUIC *uic = PPC_UIC(dev);
+ Ppc4xxDcrDeviceState *dcr = PPC4xx_DCR_DEVICE(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
- PowerPCCPU *cpu;
int i;
- if (!uic->cpu) {
- /* This is a programming error in the code using this device */
- error_setg(errp, "ppc-uic 'cpu' link property was not set");
- return;
- }
-
- cpu = POWERPC_CPU(uic->cpu);
for (i = 0; i < DCR_UICMAX; i++) {
- ppc_dcr_register(&cpu->env, uic->dcr_base + i, uic,
+ ppc4xx_dcr_register(dcr, uic->dcr_base + i, uic,
&dcr_read_uic, &dcr_write_uic);
}
@@ -273,7 +260,6 @@ static void ppc_uic_realize(DeviceState *dev, Error **errp)
}
static Property ppc_uic_properties[] = {
- DEFINE_PROP_LINK("cpu", PPCUIC, cpu, TYPE_CPU, CPUState *),
DEFINE_PROP_UINT32("dcr-base", PPCUIC, dcr_base, 0xc0),
DEFINE_PROP_BOOL("use-vectors", PPCUIC, use_vectors, true),
DEFINE_PROP_END_OF_LIST()
@@ -308,7 +294,7 @@ static void ppc_uic_class_init(ObjectClass *klass, void
*data)
static const TypeInfo ppc_uic_info = {
.name = TYPE_PPC_UIC,
- .parent = TYPE_SYS_BUS_DEVICE,
+ .parent = TYPE_PPC4xx_DCR_DEVICE,
.instance_size = sizeof(PPCUIC),
.class_init = ppc_uic_class_init,
};
diff --git a/hw/ppc/ppc405_uc.c b/hw/ppc/ppc405_uc.c
index 8412c11dd5..c070102b14 100644
--- a/hw/ppc/ppc405_uc.c
+++ b/hw/ppc/ppc405_uc.c
@@ -1149,12 +1149,10 @@ static void ppc405_soc_realize(DeviceState *dev, Error
**errp)
sysbus_mmio_map(sbd, 0, 0xef600600);
/* Universal interrupt controller */
- object_property_set_link(OBJECT(&s->uic), "cpu", OBJECT(&s->cpu),
- &error_fatal);
- sbd = SYS_BUS_DEVICE(&s->uic);
- if (!sysbus_realize(sbd, errp)) {
+ if (!ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(&s->uic), &s->cpu, errp)) {
return;
}
+ sbd = SYS_BUS_DEVICE(&s->uic);
sysbus_connect_irq(sbd, PPCUIC_OUTPUT_INT,
qdev_get_gpio_in(DEVICE(&s->cpu), PPC40x_INPUT_INT));
sysbus_connect_irq(sbd, PPCUIC_OUTPUT_CINT,
diff --git a/hw/ppc/ppc440_bamboo.c b/hw/ppc/ppc440_bamboo.c
index 873f930c77..b14a9ef776 100644
--- a/hw/ppc/ppc440_bamboo.c
+++ b/hw/ppc/ppc440_bamboo.c
@@ -193,12 +193,9 @@ static void bamboo_init(MachineState *machine)
/* interrupt controller */
uicdev = qdev_new(TYPE_PPC_UIC);
+ ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(uicdev), cpu, &error_fatal);
+ object_unref(OBJECT(uicdev));
uicsbd = SYS_BUS_DEVICE(uicdev);
-
- object_property_set_link(OBJECT(uicdev), "cpu", OBJECT(cpu),
- &error_fatal);
- sysbus_realize_and_unref(uicsbd, &error_fatal);
-
sysbus_connect_irq(uicsbd, PPCUIC_OUTPUT_INT,
qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_INT));
sysbus_connect_irq(uicsbd, PPCUIC_OUTPUT_CINT,
diff --git a/hw/ppc/ppc4xx_devs.c b/hw/ppc/ppc4xx_devs.c
index fbfb21c8e8..37e3b87c2e 100644
--- a/hw/ppc/ppc4xx_devs.c
+++ b/hw/ppc/ppc4xx_devs.c
@@ -29,7 +29,6 @@
#include "hw/irq.h"
#include "hw/ppc/ppc.h"
#include "hw/ppc/ppc4xx.h"
-#include "hw/intc/ppc-uic.h"
#include "hw/qdev-properties.h"
#include "qemu/log.h"
#include "exec/address-spaces.h"
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index 0d9259f0f2..348ed27211 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -314,7 +314,6 @@ static void sam460ex_init(MachineState *machine)
/* interrupt controllers */
for (i = 0; i < ARRAY_SIZE(uic); i++) {
- SysBusDevice *sbd;
/*
* UICs 1, 2 and 3 are cascaded through UIC 0.
* input_ints[n] is the interrupt number on UIC 0 which
@@ -326,22 +325,20 @@ static void sam460ex_init(MachineState *machine)
const int input_ints[] = { -1, 30, 10, 16 };
uic[i] = qdev_new(TYPE_PPC_UIC);
- sbd = SYS_BUS_DEVICE(uic[i]);
-
qdev_prop_set_uint32(uic[i], "dcr-base", 0xc0 + i * 0x10);
- object_property_set_link(OBJECT(uic[i]), "cpu", OBJECT(cpu),
- &error_fatal);
- sysbus_realize_and_unref(sbd, &error_fatal);
+ ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(uic[i]), cpu, &error_fatal);
+ object_unref(OBJECT(uic[i]));
+ sbdev = SYS_BUS_DEVICE(uic[i]);
if (i == 0) {
- sysbus_connect_irq(sbd, PPCUIC_OUTPUT_INT,
+ sysbus_connect_irq(sbdev, PPCUIC_OUTPUT_INT,
qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_INT));
- sysbus_connect_irq(sbd, PPCUIC_OUTPUT_CINT,
+ sysbus_connect_irq(sbdev, PPCUIC_OUTPUT_CINT,
qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_CINT));
} else {
- sysbus_connect_irq(sbd, PPCUIC_OUTPUT_INT,
+ sysbus_connect_irq(sbdev, PPCUIC_OUTPUT_INT,
qdev_get_gpio_in(uic[0], input_ints[i]));
- sysbus_connect_irq(sbd, PPCUIC_OUTPUT_CINT,
+ sysbus_connect_irq(sbdev, PPCUIC_OUTPUT_CINT,
qdev_get_gpio_in(uic[0], input_ints[i] + 1));
}
}
diff --git a/hw/ppc/virtex_ml507.c b/hw/ppc/virtex_ml507.c
index 53b126ff48..493ea0c19f 100644
--- a/hw/ppc/virtex_ml507.c
+++ b/hw/ppc/virtex_ml507.c
@@ -104,12 +104,9 @@ static PowerPCCPU *ppc440_init_xilinx(const char
*cpu_type, uint32_t sysclk)
/* interrupt controller */
uicdev = qdev_new(TYPE_PPC_UIC);
+ ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(uicdev), cpu, &error_fatal);
+ object_unref(OBJECT(uicdev));
uicsbd = SYS_BUS_DEVICE(uicdev);
-
- object_property_set_link(OBJECT(uicdev), "cpu", OBJECT(cpu),
- &error_fatal);
- sysbus_realize_and_unref(uicsbd, &error_fatal);
-
sysbus_connect_irq(uicsbd, PPCUIC_OUTPUT_INT,
qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_INT));
sysbus_connect_irq(uicsbd, PPCUIC_OUTPUT_CINT,
diff --git a/include/hw/intc/ppc-uic.h b/include/hw/intc/ppc-uic.h
index 22dd5e5ac2..4d82e9a3c6 100644
--- a/include/hw/intc/ppc-uic.h
+++ b/include/hw/intc/ppc-uic.h
@@ -25,8 +25,7 @@
#ifndef HW_INTC_PPC_UIC_H
#define HW_INTC_PPC_UIC_H
-#include "hw/sysbus.h"
-#include "qom/object.h"
+#include "hw/ppc/ppc4xx.h"
#define TYPE_PPC_UIC "ppc-uic"
OBJECT_DECLARE_SIMPLE_TYPE(PPCUIC, PPC_UIC)
@@ -56,14 +55,13 @@ enum {
struct PPCUIC {
/*< private >*/
- SysBusDevice parent_obj;
+ Ppc4xxDcrDeviceState parent_obj;
/*< public >*/
qemu_irq output_int;
qemu_irq output_cint;
/* properties */
- CPUState *cpu;
uint32_t dcr_base;
bool use_vectors;
--
2.30.4
- [PATCH v2 03/31] ppc/ppc405: QOM'ify GPT, (continued)
- [PATCH v2 03/31] ppc/ppc405: QOM'ify GPT, BALATON Zoltan, 2022/08/17
- [PATCH v2 01/31] ppc/ppc4xx: Introduce a DCR device model, BALATON Zoltan, 2022/08/17
- [PATCH v2 04/31] ppc/ppc405: QOM'ify OCM, BALATON Zoltan, 2022/08/17
- [PATCH v2 06/31] ppc/ppc405: QOM'ify DMA, BALATON Zoltan, 2022/08/17
- [PATCH v2 09/31] ppc/ppc405: QOM'ify POB, BALATON Zoltan, 2022/08/17
- [PATCH v2 10/31] ppc/ppc405: QOM'ify PLB, BALATON Zoltan, 2022/08/17
- [PATCH v2 12/31] ppc4xx: Move PLB model to ppc4xx_devs.c, BALATON Zoltan, 2022/08/17
- [PATCH v2 11/31] ppc/ppc405: QOM'ify MAL, BALATON Zoltan, 2022/08/17
- [PATCH v2 15/31] ppc4xx: Rename ppc405-ebc to ppc4xx-ebc, BALATON Zoltan, 2022/08/17
- [PATCH v2 14/31] ppc4xx: Move EBC model to ppc4xx_devs.c, BALATON Zoltan, 2022/08/17
- [PATCH v2 17/31] hw/intc/ppc-uic: Convert ppc-uic to a PPC4xx DCR device,
BALATON Zoltan <=
- [PATCH v2 05/31] ppc/ppc405: QOM'ify GPIO, BALATON Zoltan, 2022/08/17
- [PATCH v2 02/31] ppc/ppc405: QOM'ify CPC, BALATON Zoltan, 2022/08/17
- [PATCH v2 13/31] ppc4xx: Rename ppc405-plb to ppc4xx-plb, BALATON Zoltan, 2022/08/17
- [PATCH v2 21/31] hw/ppc/Kconfig: Remove PPC405 dependency from sam460ex, BALATON Zoltan, 2022/08/17
- [PATCH v2 18/31] ppc/ppc405: Use an explicit I2C object, BALATON Zoltan, 2022/08/17
- [PATCH v2 07/31] ppc/ppc405: QOM'ify EBC, BALATON Zoltan, 2022/08/17
- [PATCH v2 22/31] hw/ppc/Kconfig: Move imply before select, BALATON Zoltan, 2022/08/17
- [PATCH v2 19/31] ppc/ppc405: QOM'ify FPGA, BALATON Zoltan, 2022/08/17
- [PATCH v2 20/31] ppc405: Move machine specific code to ppc405_boards.c, BALATON Zoltan, 2022/08/17