qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 4/4] hw/riscv: use qemu_fdt_setprop_strings() in sifive_u.c


From: Alistair Francis
Subject: Re: [PATCH 4/4] hw/riscv: use qemu_fdt_setprop_strings() in sifive_u.c
Date: Mon, 20 Jun 2022 16:47:44 +1000

On Sun, Jun 19, 2022 at 6:14 AM Ben Dooks <qemu@ben.fluff.org> wrote:
>
> Use the qemu_fdt_setprop_strings() in sifve_u.c to simplify
> the code.
>
> Signed-off-by: Ben Dooks <qemu@ben.fluff.org>

Do you mind updating the other machines as well?

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  hw/riscv/sifive_u.c | 18 +++++-------------
>  1 file changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index 89d7aa2a52..16b18d90bd 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -103,13 +103,6 @@ static void create_fdt(SiFiveUState *s, const 
> MemMapEntry *memmap,
>      char *nodename;
>      uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1;
>      uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
> -    static const char * const ethclk_names[2] = { "pclk", "hclk" };
> -    static const char * const clint_compat[2] = {
> -        "sifive,clint0", "riscv,clint0"
> -    };
> -    static const char * const plic_compat[2] = {
> -        "sifive,plic-1.0.0", "riscv,plic0"
> -    };
>
>      if (ms->dtb) {
>          fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size);
> @@ -221,8 +214,8 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry 
> *memmap,
>      nodename = g_strdup_printf("/soc/clint@%lx",
>          (long)memmap[SIFIVE_U_DEV_CLINT].base);
>      qemu_fdt_add_subnode(fdt, nodename);
> -    qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
> -        (char **)&clint_compat, ARRAY_SIZE(clint_compat));
> +    qemu_fdt_setprop_strings(fdt, nodename, "compatible",
> +                             "sifive,clint0", "riscv,clint0");
>      qemu_fdt_setprop_reg64_map(fdt, nodename, &memmap[SIFIVE_U_DEV_CLINT]);
>      qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
>          cells, ms->smp.cpus * sizeof(uint32_t) * 4);
> @@ -273,8 +266,8 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry 
> *memmap,
>          (long)memmap[SIFIVE_U_DEV_PLIC].base);
>      qemu_fdt_add_subnode(fdt, nodename);
>      qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1);
> -    qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
> -        (char **)&plic_compat, ARRAY_SIZE(plic_compat));
> +    qemu_fdt_setprop_strings(fdt, nodename, "compatbile",
> +                             "sifive,plic-1.0.0", "riscv,plic0");
>      qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
>      qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
>          cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t));
> @@ -410,8 +403,7 @@ static void create_fdt(SiFiveUState *s, const MemMapEntry 
> *memmap,
>      qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
>      qemu_fdt_setprop_cells(fdt, nodename, "clocks",
>          prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
> -    qemu_fdt_setprop_string_array(fdt, nodename, "clock-names",
> -        (char **)&ethclk_names, ARRAY_SIZE(ethclk_names));
> +    qemu_fdt_setprop_strings(fdt, nodename, "clock-names", "pclk", "hclk");
>      qemu_fdt_setprop(fdt, nodename, "local-mac-address",
>          s->soc.gem.conf.macaddr.a, ETH_ALEN);
>      qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
> --
> 2.35.1
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]