[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v4 05/42] hw/cxl/device: Implement the CAP array (8.2.8.1-2)
From: |
Alex Bennée |
Subject: |
Re: [PATCH v4 05/42] hw/cxl/device: Implement the CAP array (8.2.8.1-2) |
Date: |
Wed, 26 Jan 2022 18:17:12 +0000 |
User-agent: |
mu4e 1.7.6; emacs 28.0.91 |
Jonathan Cameron <Jonathan.Cameron@huawei.com> writes:
> From: Ben Widawsky <ben.widawsky@intel.com>
>
> This implements all device MMIO up to the first capability. That
> includes the CXL Device Capabilities Array Register, as well as all of
> the CXL Device Capability Header Registers. The latter are filled in as
> they are implemented in the following patches.
>
> Endianness and alignment are managed by softmmu memory core.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> hw/cxl/cxl-device-utils.c | 105 ++++++++++++++++++++++++++++++++++++
> hw/cxl/meson.build | 1 +
> include/hw/cxl/cxl_device.h | 28 +++++++++-
> 3 files changed, 133 insertions(+), 1 deletion(-)
>
> diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
> new file mode 100644
> index 0000000000..cb1b0a8217
> --- /dev/null
> +++ b/hw/cxl/cxl-device-utils.c
> @@ -0,0 +1,105 @@
> +/*
> + * CXL Utility library for devices
> + *
> + * Copyright(C) 2020 Intel Corporation.
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2. See the
> + * COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "hw/cxl/cxl.h"
> +
> +/*
> + * Device registers have no restrictions per the spec, and so fall back to
> the
> + * default memory mapped register rules in 8.2:
> + * Software shall use CXL.io Memory Read and Write to access memory mapped
> + * register defined in this section. Unless otherwise specified, software
> + * shall restrict the accesses width based on the following:
> + * • A 32 bit register shall be accessed as a 1 Byte, 2 Bytes or 4 Bytes
> + * quantity.
> + * • A 64 bit register shall be accessed as a 1 Byte, 2 Bytes, 4 Bytes or 8
> + * Bytes
> + * • The address shall be a multiple of the access width, e.g. when
> + * accessing a register as a 4 Byte quantity, the address shall be
> + * multiple of 4.
> + * • The accesses shall map to contiguous bytes.If these rules are not
> + * followed, the behavior is undefined
> + */
> +
> +static uint64_t caps_reg_read(void *opaque, hwaddr offset, unsigned size)
> +{
> + CXLDeviceState *cxl_dstate = opaque;
> +
> + return cxl_dstate->caps_reg_state32[offset / 4];
> +}
> +
> +static uint64_t dev_reg_read(void *opaque, hwaddr offset, unsigned size)
> +{
> + return 0;
> +}
> +
> +static const MemoryRegionOps dev_ops = {
> + .read = dev_reg_read,
> + .write = NULL, /* status register is read only */
> + .endianness = DEVICE_LITTLE_ENDIAN,
> + .valid = {
> + .min_access_size = 1,
> + .max_access_size = 8,
> + .unaligned = false,
> + },
> + .impl = {
> + .min_access_size = 1,
> + .max_access_size = 8,
> + },
> +};
I think for >64 bit registers you need to use the read_with_attrs
> +
> +static const MemoryRegionOps caps_ops = {
> + .read = caps_reg_read,
> + .write = NULL, /* caps registers are read only */
> + .endianness = DEVICE_LITTLE_ENDIAN,
> + .valid = {
> + .min_access_size = 1,
> + .max_access_size = 8,
> + .unaligned = false,
> + },
> + .impl = {
> + .min_access_size = 4,
> + .max_access_size = 4,
> + },
> +};
> +
> +void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
> +{
> + /* This will be a BAR, so needs to be rounded up to pow2 for PCI spec */
> + memory_region_init(&cxl_dstate->device_registers, obj,
> "device-registers",
> + pow2ceil(CXL_MMIO_SIZE));
> +
> + memory_region_init_io(&cxl_dstate->caps, obj, &caps_ops, cxl_dstate,
> + "cap-array", CXL_CAPS_SIZE);
> + memory_region_init_io(&cxl_dstate->device, obj, &dev_ops, cxl_dstate,
> + "device-status", CXL_DEVICE_REGISTERS_LENGTH);
> +
> + memory_region_add_subregion(&cxl_dstate->device_registers, 0,
> + &cxl_dstate->caps);
> + memory_region_add_subregion(&cxl_dstate->device_registers,
> + CXL_DEVICE_REGISTERS_OFFSET,
> + &cxl_dstate->device);
> +}
> +
> +static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
> +
> +void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
> +{
> + uint32_t *cap_hdrs = cxl_dstate->caps_reg_state32;
> + const int cap_count = 1;
> +
> + /* CXL Device Capabilities Array Register */
> + ARRAY_FIELD_DP32(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
> + ARRAY_FIELD_DP32(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_VERSION, 1);
> + ARRAY_FIELD_DP32(cap_hdrs, CXL_DEV_CAP_ARRAY2, CAP_COUNT, cap_count);
> +
> + cxl_device_cap_init(cxl_dstate, DEVICE, 1);
> + device_reg_init_common(cxl_dstate);
> +}
> diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
> index 00c3876a0f..47154d6850 100644
> --- a/hw/cxl/meson.build
> +++ b/hw/cxl/meson.build
> @@ -1,3 +1,4 @@
> softmmu_ss.add(when: 'CONFIG_CXL', if_true: files(
> 'cxl-component-utils.c',
> + 'cxl-device-utils.c',
> ))
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index 3b6ed745f0..4bdfa80eb4 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -63,6 +63,8 @@
> #define CXL_DEVICE_CAP_HDR1_OFFSET 0x10 /* Figure 138 */
> #define CXL_DEVICE_CAP_REG_SIZE 0x10 /* 8.2.8.2 */
> #define CXL_DEVICE_CAPS_MAX 4 /* 8.2.8.2.1 + 8.2.8.5 */
> +#define CXL_CAPS_SIZE \
> + (CXL_DEVICE_CAP_REG_SIZE * (CXL_DEVICE_CAPS_MAX + 1)) /* +1 for header */
>
> #define CXL_DEVICE_REGISTERS_OFFSET 0x80 /* Read comment above */
> #define CXL_DEVICE_REGISTERS_LENGTH 0x8 /* 8.2.8.3.1 */
> @@ -75,11 +77,18 @@
> #define CXL_MAILBOX_REGISTERS_LENGTH \
> (CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE)
>
> +#define CXL_MMIO_SIZE \
> + (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_REGISTERS_LENGTH + \
> + CXL_MAILBOX_REGISTERS_LENGTH)
> +
> typedef struct cxl_device_state {
> MemoryRegion device_registers;
>
> /* mmio for device capabilities array - 8.2.8.2 */
> - MemoryRegion caps;
> + struct {
> + MemoryRegion caps;
> + uint32_t caps_reg_state32[CXL_CAPS_SIZE / 4];
> + };
>
> /* mmio for the device status registers 8.2.8.3 */
> MemoryRegion device;
> @@ -128,6 +137,23 @@ CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE,
> CXL_DEVICE_CAP_HDR1_OFFSET)
> CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \
> CXL_DEVICE_CAP_REG_SIZE)
>
> +#define cxl_device_cap_init(dstate, reg, cap_id) \
> + do { \
> + uint32_t *cap_hdrs = dstate->caps_reg_state32; \
> + int which = R_CXL_DEV_##reg##_CAP_HDR0; \
> + cap_hdrs[which] = \
> + FIELD_DP32(cap_hdrs[which], CXL_DEV_##reg##_CAP_HDR0, \
> + CAP_ID, cap_id); \
> + cap_hdrs[which] = FIELD_DP32( \
> + cap_hdrs[which], CXL_DEV_##reg##_CAP_HDR0, CAP_VERSION, 1); \
> + cap_hdrs[which + 1] = \
> + FIELD_DP32(cap_hdrs[which + 1], CXL_DEV_##reg##_CAP_HDR1, \
> + CAP_OFFSET, CXL_##reg##_REGISTERS_OFFSET); \
> + cap_hdrs[which + 2] = \
> + FIELD_DP32(cap_hdrs[which + 2], CXL_DEV_##reg##_CAP_HDR2, \
> + CAP_LENGTH, CXL_##reg##_REGISTERS_LENGTH); \
> + } while (0)
> +
> REG32(CXL_DEV_MAILBOX_CAP, 0)
> FIELD(CXL_DEV_MAILBOX_CAP, PAYLOAD_SIZE, 0, 5)
> FIELD(CXL_DEV_MAILBOX_CAP, INT_CAP, 5, 1)
Otherwise:
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
--
Alex Bennée
[PATCH v4 06/42] hw/cxl/device: Implement basic mailbox (8.2.8.4), Jonathan Cameron, 2022/01/24
[PATCH v4 08/42] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1), Jonathan Cameron, 2022/01/24
[PATCH v4 07/42] hw/cxl/device: Add memory device utilities, Jonathan Cameron, 2022/01/24