qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] Fix STM32F2XX USART data register readout


From: Olivier Heriveaux
Subject: Re: [PATCH] Fix STM32F2XX USART data register readout
Date: Mon, 29 Nov 2021 17:35:06 +0100

If I understand correctly (I'm not a QEmu internals expert), yes this is what happens.
Maybe stm32f2xx_usart_can_receive() is also called but since the USART_SR_RXNE flag is reset before the USART_DR is read, it does not prevent reading the next character.

Best regards,
Olivier Hériveaux

Le lun. 29 nov. 2021 à 11:46, Peter Maydell <peter.maydell@linaro.org> a écrit :
On Sun, 28 Nov 2021 at 12:07, Olivier Hériveaux
<olivier.heriveaux@ledger.fr> wrote:
>
> Fix issue where the data register may be overwritten by next character
> reception before being read and returned.
>
> Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr>
> ---
>  hw/char/stm32f2xx_usart.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/hw/char/stm32f2xx_usart.c b/hw/char/stm32f2xx_usart.c
> index 8df0832424..fde67f4f03 100644
> --- a/hw/char/stm32f2xx_usart.c
> +++ b/hw/char/stm32f2xx_usart.c
> @@ -103,10 +103,11 @@ static uint64_t stm32f2xx_usart_read(void *opaque, hwaddr addr,
>          return retvalue;
>      case USART_DR:
>          DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr);
> +        retvalue = s->usart_dr & 0x3FF;
>          s->usart_sr &= ~USART_SR_RXNE;
>          qemu_chr_fe_accept_input(&s->chr);
>          qemu_set_irq(s->irq, 0);
> -        return s->usart_dr & 0x3FF;
> +        return retvalue;
>      case USART_BRR:
>          return s->usart_brr;
>      case USART_CR1:
> --
> 2.17.1

The bug happens because qemu_chr_fe_accept_input() can cause
stm32f2xx_usart_receive() to be called, right ?

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

I'll put this in my list of patches to take via target-arm.next for the
7.0 release.

thanks
-- PMM


Les informations contenues dans ce message électronique ainsi que celles contenues dans les documents attachés sont strictement confidentielles et sont destinées à l'usage exclusif du (des) destinataire(s) nommé(s).
Toute divulgation, distribution ou reproduction, même partielle, en est strictement interdite sauf autorisation écrite et expresse de l’émetteur.
Si vous recevez ce message par erreur, veuillez le notifier immédiatement à son émetteur par retour, et le détruire ainsi que tous les documents qui y sont attachés.

The information contained in this email and in any document enclosed is strictly confidential and is intended solely for the use of the individual or entity to which it is addressed.
Partial or total disclosure, distribution or reproduction of its contents is strictly prohibited unless expressly approved in writing by the sender.
If you have received this communication in error, please notify us immediately by responding to this email, and then delete the message and its attached files from your system.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]