Re: [PATCH v4 0/3] tests/qtest: add some tests for virtio-net failover

[Laurent Vivier]

Hi,

I did something wrong and the last patch adding the test has been removed from 
the series.

I'm going to send a v5 with the test added correctly.

Sorry for the noise.

Laurent

On 19/11/2021 09:49, Laurent Vivier wrote:
> This series adds a qtest entry to test virtio-net failover feature.
>
> We check following error cases:
>
> - check missing id on device with failover_pair_id triggers an error
> - check a primary device plugged on a bus that doesn't support hotplug
>    triggers an error
>
> We check the status of the machine before and after hotplugging cards and
> feature negotiation:
>
> - check we don't see the primary device at boot if failover is on
> - check we see the primary device at boot if failover is off
> - check we don't see the primary device if failover is on
>    but failover_pair_id is not the one with on (I think this should be changed)
> - check the primary device is plugged after the feature negotiation
> - check the result if the primary device is plugged before standby device and
>    vice-versa
> - check the if the primary device is coldplugged and the standy device
>    hotplugged and vice-versa
> - check the migration triggers the unplug and the hotplug
>
> There is one preliminary patch in the series:
>
> - PATCH 1 introduces a function to enable PCI bridge.
>    Failover needs to be plugged on a pcie-root-port and while
>    the root port is not configured the cards behind it are not
>    available
>
> v4:
> - rely on query-migrate status to know the migration state rather than
>    to wait the STOP event.
> - remove the patch to add time out to qtest_qmp_eventwait()
>
> v3:
> - fix a bug with ACPI unplug and add the related test
>
> v2:
> - remove PATCH 1 that introduced a function that can be replaced by
>    qobject_to_json_pretty() (Markus)
> - Add migration to a file and from the file to check the card is
>    correctly unplugged on the source, and hotplugged on the dest
> - Add an ACPI call to eject the card as the kernel would do
>
> Laurent Vivier (3):
>    qtest/libqos: add a function to initialize secondary PCI buses
>    tests/qtest: add some tests for virtio-net failover
>    failover: fix unplug pending detection
>
>   hw/acpi/pcihp.c                   |  30 +-
>   include/hw/pci/pci_bridge.h       |   8 +
>   tests/qtest/libqos/pci.c          | 118 ++++++
>   tests/qtest/libqos/pci.h          |   1 +
>   tests/qtest/meson.build           |   3 +
>   tests/qtest/virtio-net-failover.c | 658 ++++++++++++++++++++++++++++++
>   6 files changed, 815 insertions(+), 3 deletions(-)
>   create mode 100644 tests/qtest/virtio-net-failover.c