qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v5 06/26] vl: Add sgx compound properties to expose SGX EPC secti


From: Paolo Bonzini
Subject: [PATCH v5 06/26] vl: Add sgx compound properties to expose SGX EPC sections to guest
Date: Fri, 24 Sep 2021 13:24:49 +0200

From: Sean Christopherson <sean.j.christopherson@intel.com>

Because SGX EPC is enumerated through CPUID, EPC "devices" need to be
realized prior to realizing the vCPUs themselves, i.e. long before
generic devices are parsed and realized.  From a virtualization
perspective, the CPUID aspect also means that EPC sections cannot be
hotplugged without paravirtualizing the guest kernel (hardware does
not support hotplugging as EPC sections must be locked down during
pre-boot to provide EPC's security properties).

So even though EPC sections could be realized through the generic
-devices command, they need to be created much earlier for them to
actually be usable by the guest.  Place all EPC sections in a
contiguous block, somewhat arbitrarily starting after RAM above 4g.
Ensuring EPC is in a contiguous region simplifies calculations, e.g.
device memory base, PCI hole, etc..., allows dynamic calculation of the
total EPC size, e.g. exposing EPC to guests does not require -maxmem,
and last but not least allows all of EPC to be enumerated in a single
ACPI entry, which is expected by some kernels, e.g. Windows 7 and 8.

The new compound properties command for sgx like below:
 ......
 -object memory-backend-epc,id=mem1,size=28M,prealloc=on \
 -object memory-backend-epc,id=mem2,size=10M \
 -M sgx-epc.0.memdev=mem1,sgx-epc.1.memdev=mem2

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/i386/sgx-epc.c         | 20 ++++++++++++++------
 hw/i386/x86.c             | 29 +++++++++++++++++++++++++++++
 include/hw/i386/pc.h      |  3 +++
 include/hw/i386/sgx-epc.h | 14 ++++++++++++++
 include/hw/i386/x86.h     |  1 +
 qapi/machine.json         | 26 ++++++++++++++++++++++++++
 qemu-options.hx           | 10 ++++++++--
 7 files changed, 95 insertions(+), 8 deletions(-)

diff --git a/hw/i386/sgx-epc.c b/hw/i386/sgx-epc.c
index c584acc17b..6677dc74b5 100644
--- a/hw/i386/sgx-epc.c
+++ b/hw/i386/sgx-epc.c
@@ -14,13 +14,8 @@
 #include "hw/i386/sgx-epc.h"
 #include "hw/mem/memory-device.h"
 #include "hw/qdev-properties.h"
-#include "monitor/qdev.h"
 #include "qapi/error.h"
 #include "qapi/visitor.h"
-#include "qemu/config-file.h"
-#include "qemu/error-report.h"
-#include "qemu/option.h"
-#include "qemu/units.h"
 #include "target/i386/cpu.h"
 #include "exec/address-spaces.h"
 
@@ -56,6 +51,8 @@ static void sgx_epc_realize(DeviceState *dev, Error **errp)
 {
     PCMachineState *pcms = PC_MACHINE(qdev_get_machine());
     X86MachineState *x86ms = X86_MACHINE(pcms);
+    MemoryDeviceState *md = MEMORY_DEVICE(dev);
+    SGXEPCState *sgx_epc = &pcms->sgx_epc;
     SGXEPCDevice *epc = SGX_EPC(dev);
     HostMemoryBackend *hostmem;
     const char *path;
@@ -77,7 +74,18 @@ static void sgx_epc_realize(DeviceState *dev, Error **errp)
         return;
     }
 
-    error_setg(errp, "'" TYPE_SGX_EPC "' not supported");
+    epc->addr = sgx_epc->base + sgx_epc->size;
+
+    memory_region_add_subregion(&sgx_epc->mr, epc->addr - sgx_epc->base,
+                                host_memory_backend_get_memory(hostmem));
+
+    host_memory_backend_set_mapped(hostmem, true);
+
+    sgx_epc->sections = g_renew(SGXEPCDevice *, sgx_epc->sections,
+                                sgx_epc->nr_sections + 1);
+    sgx_epc->sections[sgx_epc->nr_sections++] = epc;
+
+    sgx_epc->size += memory_device_get_region_size(md, errp);
 }
 
 static void sgx_epc_unrealize(DeviceState *dev)
diff --git a/hw/i386/x86.c b/hw/i386/x86.c
index 00448ed55a..41ef9a84a9 100644
--- a/hw/i386/x86.c
+++ b/hw/i386/x86.c
@@ -30,6 +30,8 @@
 #include "qapi/error.h"
 #include "qapi/qmp/qerror.h"
 #include "qapi/qapi-visit-common.h"
+#include "qapi/clone-visitor.h"
+#include "qapi/qapi-visit-machine.h"
 #include "qapi/visitor.h"
 #include "sysemu/qtest.h"
 #include "sysemu/whpx.h"
@@ -1263,6 +1265,27 @@ static void x86_machine_set_bus_lock_ratelimit(Object 
*obj, Visitor *v,
     visit_type_uint64(v, name, &x86ms->bus_lock_ratelimit, errp);
 }
 
+static void machine_get_sgx_epc(Object *obj, Visitor *v, const char *name,
+                                void *opaque, Error **errp)
+{
+    X86MachineState *x86ms = X86_MACHINE(obj);
+    SgxEPCList *list = x86ms->sgx_epc_list;
+
+    visit_type_SgxEPCList(v, name, &list, errp);
+}
+
+static void machine_set_sgx_epc(Object *obj, Visitor *v, const char *name,
+                                void *opaque, Error **errp)
+{
+    X86MachineState *x86ms = X86_MACHINE(obj);
+    SgxEPCList *list;
+
+    list = x86ms->sgx_epc_list;
+    visit_type_SgxEPCList(v, name, &x86ms->sgx_epc_list, errp);
+
+    qapi_free_SgxEPCList(list);
+}
+
 static void x86_machine_initfn(Object *obj)
 {
     X86MachineState *x86ms = X86_MACHINE(obj);
@@ -1322,6 +1345,12 @@ static void x86_machine_class_init(ObjectClass *oc, void 
*data)
                                 x86_machine_set_bus_lock_ratelimit, NULL, 
NULL);
     object_class_property_set_description(oc, X86_MACHINE_BUS_LOCK_RATELIMIT,
             "Set the ratelimit for the bus locks acquired in VMs");
+
+    object_class_property_add(oc, "sgx-epc", "SgxEPC",
+        machine_get_sgx_epc, machine_set_sgx_epc,
+        NULL, NULL);
+    object_class_property_set_description(oc, "sgx-epc",
+        "SGX EPC device");
 }
 
 static const TypeInfo x86_machine_info = {
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index 4d2e35a152..668e48be8a 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -12,6 +12,7 @@
 #include "hw/acpi/acpi_dev_interface.h"
 #include "hw/hotplug.h"
 #include "qom/object.h"
+#include "hw/i386/sgx-epc.h"
 
 #define HPET_INTCAP "hpet-intcap"
 
@@ -49,6 +50,8 @@ typedef struct PCMachineState {
 
     /* ACPI Memory hotplug IO base address */
     hwaddr memhp_io_base;
+
+    SGXEPCState sgx_epc;
 } PCMachineState;
 
 #define PC_MACHINE_ACPI_DEVICE_PROP "acpi-device"
diff --git a/include/hw/i386/sgx-epc.h b/include/hw/i386/sgx-epc.h
index cf3ed5c0cd..83269972e0 100644
--- a/include/hw/i386/sgx-epc.h
+++ b/include/hw/i386/sgx-epc.h
@@ -41,4 +41,18 @@ typedef struct SGXEPCDevice {
     HostMemoryBackendEpc *hostmem;
 } SGXEPCDevice;
 
+/*
+ * @base: address in guest physical address space where EPC regions start
+ * @mr: address space container for memory devices
+ */
+typedef struct SGXEPCState {
+    uint64_t base;
+    uint64_t size;
+
+    MemoryRegion mr;
+
+    struct SGXEPCDevice **sections;
+    int nr_sections;
+} SGXEPCState;
+
 #endif
diff --git a/include/hw/i386/x86.h b/include/hw/i386/x86.h
index 6e9244a82c..23267a3674 100644
--- a/include/hw/i386/x86.h
+++ b/include/hw/i386/x86.h
@@ -62,6 +62,7 @@ struct X86MachineState {
     unsigned pci_irq_mask;
     unsigned apic_id_limit;
     uint16_t boot_cpus;
+    SgxEPCList *sgx_epc_list;
 
     OnOffAuto smm;
     OnOffAuto acpi;
diff --git a/qapi/machine.json b/qapi/machine.json
index 157712f006..5132abf152 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -1194,6 +1194,32 @@
           }
 }
 
+##
+# @SgxEPC:
+#
+# Sgx EPC cmdline information
+#
+# @memdev: memory backend linked with device
+#
+# Since: 6.2
+##
+{ 'struct': 'SgxEPC',
+  'data': { 'memdev': 'str' }
+}
+
+##
+# @SgxEPCProperties:
+#
+# Properties for SgxEPC objects.
+#
+# @sgx-epc: sgx epc section properties.
+#
+# Since: 6.2
+##
+{ 'struct': 'SgxEPCProperties',
+  'data': { 'sgx-epc': ['SgxEPC'] }
+}
+
 ##
 # @MemoryDeviceInfo:
 #
diff --git a/qemu-options.hx b/qemu-options.hx
index 8f603cc7e6..ceca52818a 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -126,8 +126,14 @@ SRST
             -m 512M
 ERST
 
-HXCOMM Deprecated by -machine
-DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL)
+DEF("M", HAS_ARG, QEMU_OPTION_M,
+    "                sgx-epc.0.memdev=memid\n",
+    QEMU_ARCH_ALL)
+
+SRST
+``sgx-epc.0.memdev=@var{memid}``
+    Define an SGX EPC section.
+ERST
 
 DEF("cpu", HAS_ARG, QEMU_OPTION_cpu,
     "-cpu cpu        select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL)
-- 
2.31.1





reply via email to

[Prev in Thread] Current Thread [Next in Thread]