qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL 21/23] hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn


From: Peter Maydell
Subject: [PULL 21/23] hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn
Date: Mon, 13 Sep 2021 17:11:42 +0100

The mps2-tz boards use a data-driven structure to create the devices
that sit behind peripheral protection controllers.  Currently the
functions which create these devices are passed an 'opaque' pointer
which is always the address within the machine struct of the device
to create, and some "all devices need this" information like irqs and
addresses.

If a specific device needs more information than this, it is
currently not possible to pass that through from the PPCInfo
data structure. Add support for passing an extra data parameter,
so that we can more flexibly handle the needs of specific
device types. To provide some type-safety we make this extra
parameter a pointer to a union (which initially has no members).

In particular, we would like to be able to indicate which of the
i2c controllers are for on-board devices only and which are
connected to the external 'shield' expansion port; a subsequent
patch will use this mechanism for that purpose.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210903151435.22379-3-peter.maydell@linaro.org
---
 hw/arm/mps2-tz.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index e23830f4b7d..746ba3cc59e 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -373,6 +373,10 @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, 
int irqno)
     }
 }
 
+/* Union describing the device-specific extra data we pass to the devfn. */
+typedef union PPCExtraData {
+} PPCExtraData;
+
 /* Most of the devices in the AN505 FPGA image sit behind
  * Peripheral Protection Controllers. These data structures
  * define the layout of which devices sit behind which PPCs.
@@ -382,7 +386,8 @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int 
irqno)
  */
 typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque,
                                 const char *name, hwaddr size,
-                                const int *irqs);
+                                const int *irqs,
+                                const PPCExtraData *extradata);
 
 typedef struct PPCPortInfo {
     const char *name;
@@ -391,6 +396,7 @@ typedef struct PPCPortInfo {
     hwaddr addr;
     hwaddr size;
     int irqs[3]; /* currently no device needs more IRQ lines than this */
+    PPCExtraData extradata; /* to pass device-specific info to the devfn */
 } PPCPortInfo;
 
 typedef struct PPCInfo {
@@ -401,7 +407,8 @@ typedef struct PPCInfo {
 static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms,
                                     void *opaque,
                                     const char *name, hwaddr size,
-                                    const int *irqs)
+                                    const int *irqs,
+                                    const PPCExtraData *extradata)
 {
     /* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE,
      * and return a pointer to its MemoryRegion.
@@ -417,7 +424,7 @@ static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms,
 
 static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque,
                                const char *name, hwaddr size,
-                               const int *irqs)
+                               const int *irqs, const PPCExtraData *extradata)
 {
     /* The irq[] array is tx, rx, combined, in that order */
     MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
@@ -441,7 +448,7 @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, 
void *opaque,
 
 static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque,
                               const char *name, hwaddr size,
-                              const int *irqs)
+                              const int *irqs, const PPCExtraData *extradata)
 {
     MPS2SCC *scc = opaque;
     DeviceState *sccdev;
@@ -465,7 +472,7 @@ static MemoryRegion *make_scc(MPS2TZMachineState *mms, void 
*opaque,
 
 static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque,
                                  const char *name, hwaddr size,
-                                 const int *irqs)
+                                 const int *irqs, const PPCExtraData 
*extradata)
 {
     MPS2FPGAIO *fpgaio = opaque;
     MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
@@ -480,7 +487,8 @@ static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, 
void *opaque,
 
 static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque,
                                   const char *name, hwaddr size,
-                                  const int *irqs)
+                                  const int *irqs,
+                                  const PPCExtraData *extradata)
 {
     SysBusDevice *s;
     NICInfo *nd = &nd_table[0];
@@ -500,7 +508,8 @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, 
void *opaque,
 
 static MemoryRegion *make_eth_usb(MPS2TZMachineState *mms, void *opaque,
                                   const char *name, hwaddr size,
-                                  const int *irqs)
+                                  const int *irqs,
+                                  const PPCExtraData *extradata)
 {
     /*
      * The AN524 makes the ethernet and USB share a PPC port.
@@ -543,7 +552,7 @@ static MemoryRegion *make_eth_usb(MPS2TZMachineState *mms, 
void *opaque,
 
 static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque,
                               const char *name, hwaddr size,
-                              const int *irqs)
+                              const int *irqs, const PPCExtraData *extradata)
 {
     TZMPC *mpc = opaque;
     int i = mpc - &mms->mpc[0];
@@ -615,7 +624,7 @@ static void remap_irq_fn(void *opaque, int n, int level)
 
 static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque,
                               const char *name, hwaddr size,
-                              const int *irqs)
+                              const int *irqs, const PPCExtraData *extradata)
 {
     /* The irq[] array is DMACINTR, DMACINTERR, DMACINTTC, in that order */
     PL080State *dma = opaque;
@@ -672,7 +681,7 @@ static MemoryRegion *make_dma(MPS2TZMachineState *mms, void 
*opaque,
 
 static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque,
                               const char *name, hwaddr size,
-                              const int *irqs)
+                              const int *irqs, const PPCExtraData *extradata)
 {
     /*
      * The AN505 has five PL022 SPI controllers.
@@ -694,7 +703,7 @@ static MemoryRegion *make_spi(MPS2TZMachineState *mms, void 
*opaque,
 
 static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque,
                               const char *name, hwaddr size,
-                              const int *irqs)
+                              const int *irqs, const PPCExtraData *extradata)
 {
     ArmSbconI2CState *i2c = opaque;
     SysBusDevice *s;
@@ -707,7 +716,7 @@ static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void 
*opaque,
 
 static MemoryRegion *make_rtc(MPS2TZMachineState *mms, void *opaque,
                               const char *name, hwaddr size,
-                              const int *irqs)
+                              const int *irqs, const PPCExtraData *extradata)
 {
     PL031State *pl031 = opaque;
     SysBusDevice *s;
@@ -1084,7 +1093,7 @@ static void mps2tz_common_init(MachineState *machine)
             }
 
             mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size,
-                              pinfo->irqs);
+                              pinfo->irqs, &pinfo->extradata);
             portname = g_strdup_printf("port[%d]", port);
             object_property_set_link(OBJECT(ppc), portname, OBJECT(mr),
                                      &error_fatal);
-- 
2.20.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]