[PATCH v2 1/6] net/vmnet: dependencies setup, initial preparations

[Vladislav Yaroshchuk]

Add 'vmnet' customizable option and 'vmnet.framework' probe into
configure;

Create separate netdev per each vmnet operating mode
because they use quite different settings. Especially since
macOS 11.0 (vmnet.framework API gets lots of updates)
Create source files for network client driver, update meson.build;

Three new netdevs are added:
- vmnet-host
- vmnet-shared
- vmnet-bridged

Signed-off-by: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
---
 configure       | 31 ++++++++++++++++
 meson.build     |  5 +++
 net/clients.h   | 11 ++++++
 net/meson.build |  1 +
 net/net.c       | 10 +++++
 net/vmnet.c     | 34 +++++++++++++++++
 qapi/net.json   | 99 ++++++++++++++++++++++++++++++++++++++++++++++++-
 7 files changed, 189 insertions(+), 2 deletions(-)
 create mode 100644 net/vmnet.c

diff --git a/configure b/configure
index 9a79a004d7..9884f0aff2 100755
--- a/configure
+++ b/configure
@@ -308,6 +308,7 @@ mpath="auto"
 vnc="auto"
 sparse="auto"
 vde="$default_feature"
+vmnet="auto"
 vnc_sasl="auto"
 vnc_jpeg="auto"
 vnc_png="auto"
@@ -1074,6 +1075,10 @@ for opt do
   ;;
   --enable-vde) vde="yes"
   ;;
+  --disable-vmnet) vmnet="no"
+  ;;
+  --enable-vmnet) vmnet="yes"
+  ;;
   --disable-netmap) netmap="no"
   ;;
   --enable-netmap) netmap="yes"
@@ -1899,6 +1904,7 @@ disabled with --disable-FEATURE, default is enabled if 
available
   rdma            Enable RDMA-based migration
   pvrdma          Enable PVRDMA support
   vde             support for vde network
+  vmnet           vmnet.framework support (macOS)
   netmap          support for netmap network
   linux-aio       Linux AIO support
   linux-io-uring  Linux io_uring support
@@ -2964,6 +2970,28 @@ EOF
   fi
 fi
 
+##########################################
+# vmnet.framework probe
+if test "$vmnet" != "no" ; then
+  vmnet_flags="-framework vmnet"
+  cat > $TMPC << EOF
+#include <vmnet/vmnet.h>
+int main(void)
+{
+    (void) vmnet_allocate_mac_address_key;
+    return 0;
+}
+EOF
+  if compile_prog "" "$vmnet_flags" ; then
+    vmnet=yes
+  else
+    if test "$vmnet" = "yes" ; then
+      feature_not_found "vmnet" "'vmnet.framework' in unsupported in this 
build"
+    fi
+    vmnet=no
+  fi
+fi
+
 ##########################################
 # netmap support probe
 # Apart from looking for netmap headers, we make sure that the host API version
@@ -4538,6 +4566,9 @@ if test "$vde" = "yes" ; then
   echo "CONFIG_VDE=y" >> $config_host_mak
   echo "VDE_LIBS=$vde_libs" >> $config_host_mak
 fi
+if test "$vmnet" = "yes" ; then
+  echo "CONFIG_VMNET=y" >> $config_host_mak
+fi
 if test "$netmap" = "yes" ; then
   echo "CONFIG_NETMAP=y" >> $config_host_mak
 fi
diff --git a/meson.build b/meson.build
index bf63784812..936fab8f04 100644
--- a/meson.build
+++ b/meson.build
@@ -180,6 +180,7 @@ iokit = []
 emulator_link_args = []
 nvmm =not_found
 hvf = not_found
+vmnet = not_found
 if targetos == 'windows'
   socket = cc.find_library('ws2_32')
   winmm = cc.find_library('winmm')
@@ -191,6 +192,9 @@ if targetos == 'windows'
 elif targetos == 'darwin'
   coref = dependency('appleframeworks', modules: 'CoreFoundation')
   iokit = dependency('appleframeworks', modules: 'IOKit', required: false)
+  if config_host.has_key('CONFIG_VMNET')
+    vmnet = dependency('appleframeworks', modules: 'vmnet')
+  endif
 elif targetos == 'sunos'
   socket = [cc.find_library('socket'),
             cc.find_library('nsl'),
@@ -2886,6 +2890,7 @@ summary_info += {'vhost-user support': 
config_host.has_key('CONFIG_VHOST_USER')}
 summary_info += {'vhost-user-blk server support': have_vhost_user_blk_server}
 summary_info += {'vhost-user-fs support': 
config_host.has_key('CONFIG_VHOST_USER_FS')}
 summary_info += {'vhost-vdpa support': 
config_host.has_key('CONFIG_VHOST_VDPA')}
+summary_info += {'vmnet support': vmnet.found()}
 summary_info += {'build guest agent': 
config_host.has_key('CONFIG_GUEST_AGENT')}
 summary(summary_info, bool_yn: true, section: 'Configurable features')
 
diff --git a/net/clients.h b/net/clients.h
index 92f9b59aed..c9157789f2 100644
--- a/net/clients.h
+++ b/net/clients.h
@@ -63,4 +63,15 @@ int net_init_vhost_user(const Netdev *netdev, const char 
*name,
 
 int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
                         NetClientState *peer, Error **errp);
+#ifdef CONFIG_VMNET
+int net_init_vmnet_host(const Netdev *netdev, const char *name,
+                          NetClientState *peer, Error **errp);
+
+int net_init_vmnet_shared(const Netdev *netdev, const char *name,
+                          NetClientState *peer, Error **errp);
+
+int net_init_vmnet_bridged(const Netdev *netdev, const char *name,
+                          NetClientState *peer, Error **errp);
+#endif /* CONFIG_VMNET */
+
 #endif /* QEMU_NET_CLIENTS_H */
diff --git a/net/meson.build b/net/meson.build
index 1076b0a7ab..196cf321a2 100644
--- a/net/meson.build
+++ b/net/meson.build
@@ -38,4 +38,5 @@ softmmu_ss.add(when: 'CONFIG_POSIX', if_true: 
files(tap_posix))
 softmmu_ss.add(when: 'CONFIG_WIN32', if_true: files('tap-win32.c'))
 softmmu_ss.add(when: 'CONFIG_VHOST_NET_VDPA', if_true: files('vhost-vdpa.c'))
 
+softmmu_ss.add(when: ['CONFIG_VMNET', vmnet], if_true: files('vmnet.c'))
 subdir('can')
diff --git a/net/net.c b/net/net.c
index 52c99196c6..11bc6d289c 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1003,6 +1003,11 @@ static int (* const 
net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
 #ifdef CONFIG_L2TPV3
         [NET_CLIENT_DRIVER_L2TPV3]    = net_init_l2tpv3,
 #endif
+#ifdef CONFIG_VMNET
+        [NET_CLIENT_DRIVER_VMNET_HOST] = net_init_vmnet_host,
+        [NET_CLIENT_DRIVER_VMNET_SHARED] = net_init_vmnet_shared,
+        [NET_CLIENT_DRIVER_VMNET_BRIDGED] = net_init_vmnet_bridged,
+#endif /* CONFIG_VMNET */
 };
 
 
@@ -1088,6 +1093,11 @@ void show_netdevs(void)
 #endif
 #ifdef CONFIG_VHOST_VDPA
         "vhost-vdpa",
+#endif
+#ifdef CONFIG_VMNET
+        "vmnet-host",
+        "vmnet-shared",
+        "vmnet-bridged",
 #endif
     };
 
diff --git a/net/vmnet.c b/net/vmnet.c
new file mode 100644
index 0000000000..3f25afd7e8
--- /dev/null
+++ b/net/vmnet.c
@@ -0,0 +1,34 @@
+/*
+ * vmnet.c - network client wrapper for Apple vmnet.framework
+ *
+ * Copyright(c) 2021 Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "clients.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+
+#include <vmnet/vmnet.h>
+
+int net_init_vmnet_host(const Netdev *netdev, const char *name,
+                    NetClientState *peer, Error **errp) {
+  error_setg(errp, "vmnet is not implemented yet");
+  return -1;
+}
+
+int net_init_vmnet_shared(const Netdev *netdev, const char *name,
+                    NetClientState *peer, Error **errp) {
+  error_setg(errp, "vmnet is not implemented yet");
+  return -1;
+}
+
+int net_init_vmnet_bridged(const Netdev *netdev, const char *name,
+                    NetClientState *peer, Error **errp) {
+  error_setg(errp, "vmnet is not implemented yet");
+  return -1;
+}
diff --git a/qapi/net.json b/qapi/net.json
index 7fab2e7cd8..f4519d194f 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -452,6 +452,89 @@
     '*vhostdev':     'str',
     '*queues':       'int' } }
 
+##
+# @NetdevVmnetHostOptions:
+#
+# vmnet (host mode) network backend.
+#
+# Allows the vmnet interface to communicate with
+# other vmnet interfaces that are in host mode and also with the native host.
+#
+# @dhcpstart: The starting IPv4 address to use for the interface. Must be in 
the
+#             private IP range (RFC 1918). Must be specified along
+#             with @dhcpend and @subnetmask.
+#             This address is used as the gateway address. The subsequent 
address
+#             up to and including dhcpend are placed in the DHCP pool.
+#
+# @dhcpend: The DHCP IPv4 range end address to use for the interface. Must be 
in
+#           the private IP range (RFC 1918). Must be specified along
+#           with @dhcpstart and @subnetmask.
+#
+# @subnetmask: The IPv4 subnet mask to use on the interface. Must be specified
+#              along with @dhcpstart and @subnetmask.
+#
+#
+# Since: 6.2,
+##
+{ 'struct': 'NetdevVmnetHostOptions',
+  'data': {
+    '*dhcpstart':   'str',
+    '*dhcpend':     'str',
+    '*subnetmask':  'str'
+  },
+  'if': 'CONFIG_VMNET' }
+
+##
+# @NetdevVmnetSharedOptions:
+#
+# vmnet (shared mode) network backend.
+#
+# Allows traffic originating from the vmnet interface to reach the
+# Internet through a network address translator (NAT). The vmnet interface
+# can also communicate with the native host. By default, the vmnet interface
+# is able to communicate with other shared mode interfaces. If a subnet range
+# is specified, the vmnet interface can communicate with other shared mode
+# interfaces on the same subnet.
+#
+# @dhcpstart: The starting IPv4 address to use for the interface. Must be in 
the
+#             private IP range (RFC 1918). Must be specified along
+#             with @dhcpend and @subnetmask.
+#             This address is used as the gateway address. The subsequent 
address
+#             up to and including dhcpend are  placed in the DHCP pool.
+#
+# @dhcpend: The DHCP IPv4 range end address to use for the interface. Must be 
in
+#           the private IP range (RFC 1918). Must be specified along
+#           with @dhcpstart and @subnetmask.
+#
+# @subnetmask: The IPv4 subnet mask to use on the interface. Must be specified
+#              along with @dhcpstart and @subnetmask.
+#
+#
+# Since: 6.2,
+##
+{ 'struct': 'NetdevVmnetSharedOptions',
+  'data': {
+    '*dhcpstart':    'str',
+    '*dhcpend':      'str',
+    '*subnetmask':   'str'
+  },
+  'if': 'CONFIG_VMNET' }
+
+##
+# @NetdevVmnetBridgedOptions:
+#
+# vmnet (bridged mode) network backend.
+#
+# Bridges the vmnet interface with a physical network interface.
+#
+# @ifname: The name of the physical interface to be bridged.
+#
+# Since: 6.2
+##
+{ 'struct': 'NetdevVmnetBridgedOptions',
+  'data': { 'ifname': 'str' },
+  'if': 'CONFIG_VMNET' }
+
 ##
 # @NetClientDriver:
 #
@@ -460,10 +543,16 @@
 # Since: 2.7
 #
 #        @vhost-vdpa since 5.1
+#        @vmnet-host since 6.2
+#        @vmnet-shared since 6.2
+#        @vmnet-bridged since 6.2
 ##
 { 'enum': 'NetClientDriver',
   'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
-            'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa' ] }
+            'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa',
+            { 'name': 'vmnet-host', 'if': 'CONFIG_VMNET' },
+            { 'name': 'vmnet-shared', 'if': 'CONFIG_VMNET' },
+            { 'name': 'vmnet-bridged', 'if': 'CONFIG_VMNET' }] }
 
 ##
 # @Netdev:
@@ -477,6 +566,9 @@
 # Since: 1.2
 #
 #        'l2tpv3' - since 2.1
+#        'vmnet-host' - since 6.2
+#        'vmnet-shared' - since 6.2
+#        'vmnet-bridged' - since 6.2
 ##
 { 'union': 'Netdev',
   'base': { 'id': 'str', 'type': 'NetClientDriver' },
@@ -492,7 +584,10 @@
     'hubport':  'NetdevHubPortOptions',
     'netmap':   'NetdevNetmapOptions',
     'vhost-user': 'NetdevVhostUserOptions',
-    'vhost-vdpa': 'NetdevVhostVDPAOptions' } }
+    'vhost-vdpa': 'NetdevVhostVDPAOptions',
+    'vmnet-host': 'NetdevVmnetHostOptions',
+    'vmnet-shared': 'NetdevVmnetSharedOptions',
+    'vmnet-bridged': 'NetdevVmnetBridgedOptions' } }
 
 ##
 # @RxState:
-- 
2.23.0