[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 10/12] mac_via: remove explicit viaN prefix from VIA IRQ gpios
From: |
Mark Cave-Ayland |
Subject: |
[PATCH 10/12] mac_via: remove explicit viaN prefix from VIA IRQ gpios |
Date: |
Mon, 30 Aug 2021 11:24:45 +0100 |
Now that q800 VIA1 and VIA2 are completely separate devices there is no need to
add a specific device prefix to ensure that the IRQ lines remain separate.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
hw/m68k/q800.c | 10 ++++------
hw/misc/mac_via.c | 9 +++------
2 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index ec28e69802..5ba87f789c 100644
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -377,12 +377,10 @@ static void q800_init(MachineState *machine)
sysbus = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(sysbus, &error_fatal);
- sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in_named(via2_dev,
- "via2-irq",
- VIA2_IRQ_SCSI_BIT));
- sysbus_connect_irq(sysbus, 1,
- qdev_get_gpio_in_named(via2_dev, "via2-irq",
- VIA2_IRQ_SCSI_DATA_BIT));
+ sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(via2_dev,
+ VIA2_IRQ_SCSI_BIT));
+ sysbus_connect_irq(sysbus, 1, qdev_get_gpio_in(via2_dev,
+ VIA2_IRQ_SCSI_DATA_BIT));
sysbus_mmio_map(sysbus, 0, ESP_BASE);
sysbus_mmio_map(sysbus, 1, ESP_PDMA);
diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
index 7b9f067e71..f093f7388e 100644
--- a/hw/misc/mac_via.c
+++ b/hw/misc/mac_via.c
@@ -1004,8 +1004,7 @@ static void mos6522_q800_via1_realize(DeviceState *dev,
Error **errp)
v1s->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET;
adb_register_autopoll_callback(adb_bus, adb_via_poll, v1s);
- v1s->adb_data_ready = qdev_get_gpio_in_named(dev, "via1-irq",
- VIA1_IRQ_ADB_READY_BIT);
+ v1s->adb_data_ready = qdev_get_gpio_in(dev, VIA1_IRQ_ADB_READY_BIT);
if (v1s->blk) {
int64_t len = blk_getlength(v1s->blk);
@@ -1042,8 +1041,7 @@ static void mos6522_q800_via1_init(Object *obj)
qbus_create_inplace((BusState *)&v1s->adb_bus, sizeof(v1s->adb_bus),
TYPE_ADB_BUS, DEVICE(v1s), "adb.0");
- qdev_init_gpio_in_named(DEVICE(obj), via1_irq_request, "via1-irq",
- VIA1_IRQ_NB);
+ qdev_init_gpio_in(DEVICE(obj), via1_irq_request, VIA1_IRQ_NB);
}
static const VMStateDescription vmstate_q800_via1 = {
@@ -1136,8 +1134,7 @@ static void mos6522_q800_via2_init(Object *obj)
"via2", VIA_SIZE);
sysbus_init_mmio(sbd, &v2s->via_mem);
- qdev_init_gpio_in_named(DEVICE(obj), via2_irq_request, "via2-irq",
- VIA2_IRQ_NB);
+ qdev_init_gpio_in(DEVICE(obj), via2_irq_request, VIA2_IRQ_NB);
}
static const VMStateDescription vmstate_q800_via2 = {
--
2.20.1
- [PATCH 02/12] mac_via: move last_b variable into q800 VIA1 VMStateDescription, (continued)
- [PATCH 02/12] mac_via: move last_b variable into q800 VIA1 VMStateDescription, Mark Cave-Ayland, 2021/08/30
- [PATCH 05/12] mac_via: move ADB variables to MOS6522Q800VIA1State, Mark Cave-Ayland, 2021/08/30
- [PATCH 06/12] mac_via: move q800 VIA1 timer variables to q800 VIA1 VMStateDescription, Mark Cave-Ayland, 2021/08/30
- [PATCH 07/12] mac_via: move VIA1 reset logic from mac_via_reset() to mos6522_q800_via1_reset(), Mark Cave-Ayland, 2021/08/30
- [PATCH 08/12] mac_via: move VIA1 realize logic from mac_via_realize() to mos6522_q800_via1_realize(), Mark Cave-Ayland, 2021/08/30
- [PATCH 09/12] mac_via: remove mac_via device, Mark Cave-Ayland, 2021/08/30
- [PATCH 04/12] mac_via: move PRAM/RTC variables to MOS6522Q800VIA1State, Mark Cave-Ayland, 2021/08/30
- [PATCH 10/12] mac_via: remove explicit viaN prefix from VIA IRQ gpios,
Mark Cave-Ayland <=
- [PATCH 11/12] mac_via: rename VIA2_IRQ_SLOT_BIT to VIA2_IRQ_NUBUS_BIT, Mark Cave-Ayland, 2021/08/30
- [PATCH 12/12] mac_via: add qdev gpios for nubus slot interrupts to VIA2, Mark Cave-Ayland, 2021/08/30