[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH for-6.2 v5 5/5] hw/acpi/aml-build: Generate PPTT table
From: |
Michael S. Tsirkin |
Subject: |
Re: [PATCH for-6.2 v5 5/5] hw/acpi/aml-build: Generate PPTT table |
Date: |
Mon, 23 Aug 2021 19:52:31 -0400 |
On Thu, Aug 05, 2021 at 08:39:21PM +0800, Yanan Wang wrote:
> From: Andrew Jones <drjones@redhat.com>
>
> Add the Processor Properties Topology Table (PPTT) to expose
> CPU topology information defined by users to ACPI guests.
>
> Note, a DT-boot Linux guest with a non-flat CPU topology will
> see socket and core IDs being sequential integers starting
> from zero, which is different from ACPI-boot Linux guest,
> e.g. with -smp 4,sockets=2,cores=2,threads=1
>
> a DT boot produces:
>
> cpu: 0 package_id: 0 core_id: 0
> cpu: 1 package_id: 0 core_id: 1
> cpu: 2 package_id: 1 core_id: 0
> cpu: 3 package_id: 1 core_id: 1
>
> an ACPI boot produces:
>
> cpu: 0 package_id: 36 core_id: 0
> cpu: 1 package_id: 36 core_id: 1
> cpu: 2 package_id: 96 core_id: 2
> cpu: 3 package_id: 96 core_id: 3
>
> This is due to several reasons:
>
> 1) DT cpu nodes do not have an equivalent field to what the PPTT
> ACPI Processor ID must be, i.e. something equal to the MADT CPU
> UID or equal to the UID of an ACPI processor container. In both
> ACPI cases those are platform dependant IDs assigned by the
> vendor.
>
> 2) While QEMU is the vendor for a guest, if the topology specifies
> SMT (> 1 thread), then, with ACPI, it is impossible to assign a
> core-id the same value as a package-id, thus it is not possible
> to have package-id=0 and core-id=0. This is because package and
> core containers must be in the same ACPI namespace and therefore
> must have unique UIDs.
>
> 3) ACPI processor containers are not mandatorily required for PPTT
> tables to be used and, due to the limitations of which IDs are
> selected described above in (2), they are not helpful for QEMU,
> so we don't build them with this patch. In the absence of them,
> Linux assigns its own unique IDs. The maintainers have chosen not
> to use counters from zero, but rather ACPI table offsets, which
> explains why the numbers are so much larger than with DT.
>
> 4) When there is no SMT (threads=1) the core IDs for ACPI boot guests
> match the logical CPU IDs, because these IDs must be equal to the
> MADT CPU UID (as no processor containers are present), and QEMU
> uses the logical CPU ID for these MADT IDs.
>
> So in summary, with QEMU as vender for the guest, we use sequential
vendor?
> integers starting from zero for non-leaf nodes without valid ID flag,
> so that guest will ignore them and use table offsets as unique IDs.
> And we use logical CPU IDs for leaf nodes to be consistent with MADT.
>
> Signed-off-by: Andrew Jones <drjones@redhat.com>
> Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
> Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
> ---
> hw/acpi/aml-build.c | 50 +++++++++++++++++++++++++++++++++++++
> hw/arm/virt-acpi-build.c | 8 +++++-
> include/hw/acpi/aml-build.h | 3 +++
> 3 files changed, 60 insertions(+), 1 deletion(-)
>
> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
> index 9fa5024414..aa61c9651e 100644
> --- a/hw/acpi/aml-build.c
> +++ b/hw/acpi/aml-build.c
> @@ -1946,6 +1946,56 @@ void build_processor_hierarchy_node(GArray *tbl,
> uint32_t flags,
> }
> }
>
> +/* ACPI 6.2: 5.2.29 Processor Properties Topology Table (PPTT) */
> +void build_pptt(GArray *table_data, BIOSLinker *linker, MachineState *ms,
> + const char *oem_id, const char *oem_table_id)
> +{
> + int pptt_start = table_data->len;
> + int uid = 0;
> + int socket;
> +
> + acpi_data_push(table_data, sizeof(AcpiTableHeader));
> +
> + for (socket = 0; socket < ms->smp.sockets; socket++) {
> + uint32_t socket_offset = table_data->len - pptt_start;
> + int core;
> +
> + build_processor_hierarchy_node(
> + table_data,
> + (1 << 0), /* ACPI 6.2 - Physical package */
A bit better to be detailed:
/* Physical package - represents the boundary of a physical package */
> + 0, socket, NULL, 0);
> +
> + for (core = 0; core < ms->smp.cores; core++) {
> + uint32_t core_offset = table_data->len - pptt_start;
> + int thread;
> +
> + if (ms->smp.threads > 1) {
> + build_processor_hierarchy_node(table_data, 0, socket_offset,
and here:
/* Physical package - does not represent the boundary of a physical package */
> + core, NULL, 0);
> +
> + for (thread = 0; thread < ms->smp.threads; thread++) {
> + build_processor_hierarchy_node(
> + table_data,
> + (1 << 1) | /* ACPI 6.2 - ACPI Processor ID valid */
> + (1 << 2) | /* ACPI 6.3 - Processor is a Thread */
> + (1 << 3), /* ACPI 6.3 - Node is a Leaf */
> + core_offset, uid++, NULL, 0);
> + }
> + } else {
> + build_processor_hierarchy_node(
> + table_data,
> + (1 << 1) | /* ACPI 6.2 - ACPI Processor ID valid */
> + (1 << 3), /* ACPI 6.3 - Node is a Leaf */
> + socket_offset, uid++, NULL, 0);
> + }
> + }
> + }
> +
> + build_header(linker, table_data,
> + (void *)(table_data->data + pptt_start), "PPTT",
> + table_data->len - pptt_start, 2, oem_id, oem_table_id);
> +}
> +
> /* build rev1/rev3/rev5.1 FADT */
> void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
> const char *oem_id, const char *oem_table_id)
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 037cc1fd82..db23306a06 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -790,13 +790,19 @@ void virt_acpi_build(VirtMachineState *vms,
> AcpiBuildTables *tables)
> dsdt = tables_blob->len;
> build_dsdt(tables_blob, tables->linker, vms);
>
> - /* FADT MADT GTDT MCFG SPCR pointed to by RSDT */
> + /* FADT MADT PPTT GTDT MCFG SPCR pointed to by RSDT */
> acpi_add_table(table_offsets, tables_blob);
> build_fadt_rev5(tables_blob, tables->linker, vms, dsdt);
>
> acpi_add_table(table_offsets, tables_blob);
> build_madt(tables_blob, tables->linker, vms);
>
> + if (!vmc->no_cpu_topology) {
> + acpi_add_table(table_offsets, tables_blob);
> + build_pptt(tables_blob, tables->linker, ms,
> + vms->oem_id, vms->oem_table_id);
> + }
> +
> acpi_add_table(table_offsets, tables_blob);
> build_gtdt(tables_blob, tables->linker, vms);
>
> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
> index ea74b8f6ed..6c29f853cd 100644
> --- a/include/hw/acpi/aml-build.h
> +++ b/include/hw/acpi/aml-build.h
> @@ -466,6 +466,9 @@ void build_processor_hierarchy_node(GArray *tbl, uint32_t
> flags,
> uint32_t parent, uint32_t id,
> uint32_t *priv_rsrc, uint32_t priv_num);
>
> +void build_pptt(GArray *table_data, BIOSLinker *linker, MachineState *ms,
> + const char *oem_id, const char *oem_table_id);
> +
> void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
> const char *oem_id, const char *oem_table_id);
>
> --
> 2.19.1