[PATCH for-6.2 11/25] hw/arm/stm32f100: Wire up sysclk and refclk

[Peter Maydell]

Wire up the sysclk and refclk for the stm32f100 SoC.  This SoC always
runs the systick refclk at 1/8 the frequency of the main CPU clock,
so the board code only needs to provide a single sysclk clock.

Because there is only one board using this SoC, we convert the SoC
and the board together, rather than splitting it into "add clock to
SoC; connect clock in board; add error check in SoC code that clock
is wired up".

When the systick device starts honouring its clock inputs, this will
fix an emulation inaccuracy in the stm32vldiscovery board where the
systick reference clock was running at 1MHz rather than 3MHz.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/stm32f100_soc.h |  4 ++++
 hw/arm/stm32f100_soc.c         | 30 ++++++++++++++++++++++++++++++
 hw/arm/stm32vldiscovery.c      | 12 +++++++-----
 3 files changed, 41 insertions(+), 5 deletions(-)

diff --git a/include/hw/arm/stm32f100_soc.h b/include/hw/arm/stm32f100_soc.h
index b7d71c6c634..40cd415b284 100644
--- a/include/hw/arm/stm32f100_soc.h
+++ b/include/hw/arm/stm32f100_soc.h
@@ -29,6 +29,7 @@
 #include "hw/ssi/stm32f2xx_spi.h"
 #include "hw/arm/armv7m.h"
 #include "qom/object.h"
+#include "hw/clock.h"
 
 #define TYPE_STM32F100_SOC "stm32f100-soc"
 OBJECT_DECLARE_SIMPLE_TYPE(STM32F100State, STM32F100_SOC)
@@ -56,6 +57,9 @@ struct STM32F100State {
     MemoryRegion sram;
     MemoryRegion flash;
     MemoryRegion flash_alias;
+
+    Clock *sysclk;
+    Clock *refclk;
 };
 
 #endif
diff --git a/hw/arm/stm32f100_soc.c b/hw/arm/stm32f100_soc.c
index 0be92b2c475..f7b344ba9fb 100644
--- a/hw/arm/stm32f100_soc.c
+++ b/hw/arm/stm32f100_soc.c
@@ -30,6 +30,7 @@
 #include "exec/address-spaces.h"
 #include "hw/arm/stm32f100_soc.h"
 #include "hw/qdev-properties.h"
+#include "hw/qdev-clock.h"
 #include "hw/misc/unimp.h"
 #include "sysemu/sysemu.h"
 
@@ -57,6 +58,9 @@ static void stm32f100_soc_initfn(Object *obj)
     for (i = 0; i < STM_NUM_SPIS; i++) {
         object_initialize_child(obj, "spi[*]", &s->spi[i], TYPE_STM32F2XX_SPI);
     }
+
+    s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0);
+    s->refclk = qdev_init_clock_in(DEVICE(s), "refclk", NULL, NULL, 0);
 }
 
 static void stm32f100_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -68,6 +72,30 @@ static void stm32f100_soc_realize(DeviceState *dev_soc, 
Error **errp)
 
     MemoryRegion *system_memory = get_system_memory();
 
+    /*
+     * We use s->refclk internally and only define it with qdev_init_clock_in()
+     * so it is correctly parented and not leaked on an init/deinit; it is not
+     * intended as an externally exposed clock.
+     */
+    if (clock_has_source(s->refclk)) {
+        error_setg(errp, "refclk clock must not be wired up by the board 
code");
+        return;
+    }
+
+    if (!clock_has_source(s->sysclk)) {
+        error_setg(errp, "sysclk clock must be wired up by the board code");
+        return;
+    }
+
+    /*
+     * TODO: ideally we should model the SoC RCC and its ability to
+     * change the sysclk frequency and define different sysclk sources.
+     */
+
+    /* The refclk always runs at frequency HCLK / 8 */
+    clock_set_mul_div(s->refclk, 8, 1);
+    clock_set_source(s->refclk, s->sysclk);
+
     /*
      * Init flash region
      * Flash starts at 0x08000000 and then is aliased to boot memory at 0x0
@@ -89,6 +117,8 @@ static void stm32f100_soc_realize(DeviceState *dev_soc, 
Error **errp)
     qdev_prop_set_uint32(armv7m, "num-irq", 61);
     qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
     qdev_prop_set_bit(armv7m, "enable-bitband", true);
+    qdev_connect_clock_in(armv7m, "cpuclk", s->sysclk);
+    qdev_connect_clock_in(armv7m, "refclk", s->refclk);
     object_property_set_link(OBJECT(&s->armv7m), "memory",
                              OBJECT(get_system_memory()), &error_abort);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->armv7m), errp)) {
diff --git a/hw/arm/stm32vldiscovery.c b/hw/arm/stm32vldiscovery.c
index 7e8191ebf5f..07e401a818d 100644
--- a/hw/arm/stm32vldiscovery.c
+++ b/hw/arm/stm32vldiscovery.c
@@ -27,6 +27,7 @@
 #include "qapi/error.h"
 #include "hw/boards.h"
 #include "hw/qdev-properties.h"
+#include "hw/qdev-clock.h"
 #include "qemu/error-report.h"
 #include "hw/arm/stm32f100_soc.h"
 #include "hw/arm/boot.h"
@@ -39,16 +40,17 @@
 static void stm32vldiscovery_init(MachineState *machine)
 {
     DeviceState *dev;
+    Clock *sysclk;
 
-    /*
-     * TODO: ideally we would model the SoC RCC and let it handle
-     * system_clock_scale, including its ability to define different
-     * possible SYSCLK sources.
-     */
     system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;
 
+    /* This clock doesn't need migration because it is fixed-frequency */
+    sysclk = clock_new(OBJECT(machine), "SYSCLK");
+    clock_set_hz(sysclk, SYSCLK_FRQ);
+
     dev = qdev_new(TYPE_STM32F100_SOC);
     qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m3"));
+    qdev_connect_clock_in(dev, "sysclk", sysclk);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     armv7m_load_kernel(ARM_CPU(first_cpu),
-- 
2.20.1