[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscar
From: |
Peter Xu |
Subject: |
Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination |
Date: |
Fri, 23 Jul 2021 12:34:05 -0400 |
On Wed, Jul 21, 2021 at 11:27:58AM +0200, David Hildenbrand wrote:
> Currently, when someone (i.e., the VM) accesses discarded parts inside a
> RAMBlock with a RamDiscardManager managing the corresponding mapped memory
> region, postcopy will request migration of the corresponding page from the
> source. The source, however, will never answer, because it refuses to
> migrate such pages with undefined content ("logically unplugged"): the
> pages are never dirty, and get_queued_page() will consequently skip
> processing these postcopy requests.
>
> Especially reading discarded ("logically unplugged") ranges is supposed to
> work in some setups (for example with current virtio-mem), although it
> barely ever happens: still, not placing a page would currently stall the
> VM, as it cannot make forward progress.
>
> Let's check the state via the RamDiscardManager (the state e.g.,
> of virtio-mem is migrated during precopy) and avoid sending a request
> that will never get answered. Place a fresh zero page instead to keep
> the VM working. This is the same behavior that would happen
> automatically without userfaultfd being active, when accessing virtual
> memory regions without populated pages -- "populate on demand".
>
> Signed-off-by: David Hildenbrand <david@redhat.com>
> ---
> migration/postcopy-ram.c | 25 +++++++++++++++++++++----
> migration/ram.c | 23 +++++++++++++++++++++++
> migration/ram.h | 1 +
> 3 files changed, 45 insertions(+), 4 deletions(-)
>
> diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
> index 2e9697bdd2..673f60ce2b 100644
> --- a/migration/postcopy-ram.c
> +++ b/migration/postcopy-ram.c
> @@ -671,6 +671,23 @@ int postcopy_wake_shared(struct PostCopyFD *pcfd,
> return ret;
> }
>
> +static int postcopy_request_page(MigrationIncomingState *mis, RAMBlock *rb,
> + ram_addr_t start, uint64_t haddr)
> +{
> + /*
> + * Discarded pages (via RamDiscardManager) are never migrated. On
> unlikely
> + * access, place a zeropage, which will also set the relevant bits in the
> + * recv_bitmap accordingly, so we won't try placing a zeropage twice.
> + */
> + if (ramblock_page_is_discarded(rb, start)) {
> + bool received = ramblock_recv_bitmap_test_byte_offset(rb, start);
Will received be set for any case with the current code base? As I thought
virtio-mem forbids plug/unplug during the whole lifecycle of migration.
> +
> + return received ? 0 : postcopy_place_page_zero(mis, (void *)haddr,
> rb);
(now we can fill up pages in two threads.. but looks thread-safe)
Meanwhile if this is highly not wanted, maybe worth an error_report_once() so
the admin could see something?
> + }
> +
> + return migrate_send_rp_req_pages(mis, rb, start, haddr);
> +}
> +
> /*
> * Callback from shared fault handlers to ask for a page,
> * the page must be specified by a RAMBlock and an offset in that rb
> @@ -690,7 +707,7 @@ int postcopy_request_shared_page(struct PostCopyFD *pcfd,
> RAMBlock *rb,
> qemu_ram_get_idstr(rb), rb_offset);
> return postcopy_wake_shared(pcfd, client_addr, rb);
> }
> - migrate_send_rp_req_pages(mis, rb, aligned_rbo, client_addr);
> + postcopy_request_page(mis, rb, aligned_rbo, client_addr);
> return 0;
> }
>
> @@ -984,8 +1001,8 @@ retry:
> * Send the request to the source - we want to request one
> * of our host page sizes (which is >= TPS)
> */
> - ret = migrate_send_rp_req_pages(mis, rb, rb_offset,
> - msg.arg.pagefault.address);
> + ret = postcopy_request_page(mis, rb, rb_offset,
> + msg.arg.pagefault.address);
> if (ret) {
> /* May be network failure, try to wait for recovery */
> if (ret == -EIO && postcopy_pause_fault_thread(mis)) {
> @@ -993,7 +1010,7 @@ retry:
> goto retry;
> } else {
> /* This is a unavoidable fault */
> - error_report("%s: migrate_send_rp_req_pages() get %d",
> + error_report("%s: postcopy_request_page() get %d",
> __func__, ret);
> break;
> }
> diff --git a/migration/ram.c b/migration/ram.c
> index 4bf74ae2e1..d7505f5368 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -876,6 +876,29 @@ static uint64_t
> ramblock_dirty_bitmap_exclude_discarded_pages(RAMBlock *rb)
> return cleared_bits;
> }
>
> +/*
> + * Check if a page falls into a discarded range as managed by a
> + * RamDiscardManager responsible for the mapped memory region of the
> RAMBlock.
> + * Pages inside discarded ranges are never migrated and postcopy has to
> + * place zeropages instead.
> + *
> + * Note: The result is only stable while migration (precopy/postcopy).
> + */
> +bool ramblock_page_is_discarded(RAMBlock *rb, ram_addr_t offset)
> +{
> + if (rb->mr && memory_region_has_ram_discard_manager(rb->mr)) {
> + RamDiscardManager *rdm =
> memory_region_get_ram_discard_manager(rb->mr);
> + MemoryRegionSection section = {
> + .mr = rb->mr,
> + .offset_within_region = offset,
> + .size = int128_get64(TARGET_PAGE_SIZE),
rb->page_size?
Although I think it should also work with TARGET_PAGE_SIZE in this specific
case, but maybe still better to use what we have.
> + };
> +
> + return !ram_discard_manager_is_populated(rdm, §ion);
> + }
> + return false;
> +}
> +
> /* Called with RCU critical section */
> static void ramblock_sync_dirty_bitmap(RAMState *rs, RAMBlock *rb)
> {
> diff --git a/migration/ram.h b/migration/ram.h
> index 4833e9fd5b..6e7f12e556 100644
> --- a/migration/ram.h
> +++ b/migration/ram.h
> @@ -72,6 +72,7 @@ void ramblock_recv_bitmap_set_range(RAMBlock *rb, void
> *host_addr, size_t nr);
> int64_t ramblock_recv_bitmap_send(QEMUFile *file,
> const char *block_name);
> int ram_dirty_bitmap_reload(MigrationState *s, RAMBlock *rb);
> +bool ramblock_page_is_discarded(RAMBlock *rb, ram_addr_t offset);
>
> /* ram cache */
> int colo_init_ram_cache(void);
> --
> 2.31.1
>
--
Peter Xu
- [PATCH v2 0/6] migration/ram: Optimize for virtio-mem via RamDiscardManager, David Hildenbrand, 2021/07/21
- [PATCH v2 2/6] virtio-mem: Implement replay_discarded RamDiscardManager callback, David Hildenbrand, 2021/07/21
- [PATCH v2 1/6] memory: Introduce replay_discarded callback for RamDiscardManager, David Hildenbrand, 2021/07/21
- [PATCH v2 3/6] migration/ram: Handle RAMBlocks with a RamDiscardManager on the migration source, David Hildenbrand, 2021/07/21
- [PATCH v2 4/6] virtio-mem: Drop precopy notifier, David Hildenbrand, 2021/07/21
- [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, David Hildenbrand, 2021/07/21
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination,
Peter Xu <=
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, David Hildenbrand, 2021/07/23
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, Peter Xu, 2021/07/23
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, David Hildenbrand, 2021/07/23
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, Peter Xu, 2021/07/23
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, David Hildenbrand, 2021/07/29
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, Peter Xu, 2021/07/29
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, David Hildenbrand, 2021/07/29
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, Peter Xu, 2021/07/29
- Re: [PATCH v2 5/6] migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination, David Hildenbrand, 2021/07/29
[PATCH v2 6/6] migration/ram: Handle RAMBlocks with a RamDiscardManager on background snapshots, David Hildenbrand, 2021/07/21