qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 03/11] qemu/atomic: Remove pre-C11 atomic fallbacks


From: Richard Henderson
Subject: [PATCH v2 03/11] qemu/atomic: Remove pre-C11 atomic fallbacks
Date: Fri, 16 Jul 2021 18:41:13 -0700

We now require c11, so the fallbacks are now dead code

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 configure             |   7 --
 include/qemu/atomic.h | 204 +++---------------------------------------
 2 files changed, 10 insertions(+), 201 deletions(-)

diff --git a/configure b/configure
index 4d0a2bfdd8..628d596be8 100755
--- a/configure
+++ b/configure
@@ -3902,18 +3902,11 @@ cat > $TMPC << EOF
 int main(void)
 {
   uint64_t x = 0, y = 0;
-#ifdef __ATOMIC_RELAXED
   y = __atomic_load_n(&x, __ATOMIC_RELAXED);
   __atomic_store_n(&x, y, __ATOMIC_RELAXED);
   __atomic_compare_exchange_n(&x, &y, x, 0, __ATOMIC_RELAXED, 
__ATOMIC_RELAXED);
   __atomic_exchange_n(&x, y, __ATOMIC_RELAXED);
   __atomic_fetch_add(&x, y, __ATOMIC_RELAXED);
-#else
-  typedef char is_host64[sizeof(void *) >= sizeof(uint64_t) ? 1 : -1];
-  __sync_lock_test_and_set(&x, y);
-  __sync_val_compare_and_swap(&x, y, 0);
-  __sync_fetch_and_add(&x, y);
-#endif
   return 0;
 }
 EOF
diff --git a/include/qemu/atomic.h b/include/qemu/atomic.h
index 55d75fc757..a45f115fe1 100644
--- a/include/qemu/atomic.h
+++ b/include/qemu/atomic.h
@@ -27,8 +27,9 @@
  */
 #define typeof_strip_qual(expr)   typeof((void)0, (expr))
 
-#ifdef __ATOMIC_RELAXED
-/* For C11 atomic ops */
+#ifndef __ATOMIC_RELAXED
+#error "Expecting C11 atomic ops"
+#endif
 
 /* Manual memory barriers
  *
@@ -206,193 +207,8 @@
 #define qatomic_xor(ptr, n) \
     ((void) __atomic_fetch_xor(ptr, n, __ATOMIC_SEQ_CST))
 
-#else /* __ATOMIC_RELAXED */
-
-#ifdef __alpha__
-#define smp_read_barrier_depends()   asm volatile("mb":::"memory")
-#endif
-
-#if defined(__i386__) || defined(__x86_64__) || defined(__s390x__)
-
-/*
- * Because of the strongly ordered storage model, wmb() and rmb() are nops
- * here (a compiler barrier only).  QEMU doesn't do accesses to write-combining
- * qemu memory or non-temporal load/stores from C code.
- */
-#define smp_mb_release()   barrier()
-#define smp_mb_acquire()   barrier()
-
-/*
- * __sync_lock_test_and_set() is documented to be an acquire barrier only,
- * but it is a full barrier at the hardware level.  Add a compiler barrier
- * to make it a full barrier also at the compiler level.
- */
-#define qatomic_xchg(ptr, i)    (barrier(), __sync_lock_test_and_set(ptr, i))
-
-#elif defined(_ARCH_PPC)
-
-/*
- * We use an eieio() for wmb() on powerpc.  This assumes we don't
- * need to order cacheable and non-cacheable stores with respect to
- * each other.
- *
- * smp_mb has the same problem as on x86 for not-very-new GCC
- * (http://patchwork.ozlabs.org/patch/126184/, Nov 2011).
- */
-#define smp_wmb()          ({ asm volatile("eieio" ::: "memory"); (void)0; })
-#if defined(__powerpc64__)
-#define smp_mb_release()   ({ asm volatile("lwsync" ::: "memory"); (void)0; })
-#define smp_mb_acquire()   ({ asm volatile("lwsync" ::: "memory"); (void)0; })
-#else
-#define smp_mb_release()   ({ asm volatile("sync" ::: "memory"); (void)0; })
-#define smp_mb_acquire()   ({ asm volatile("sync" ::: "memory"); (void)0; })
-#endif
-#define smp_mb()           ({ asm volatile("sync" ::: "memory"); (void)0; })
-
-#endif /* _ARCH_PPC */
-
-/*
- * For (host) platforms we don't have explicit barrier definitions
- * for, we use the gcc __sync_synchronize() primitive to generate a
- * full barrier.  This should be safe on all platforms, though it may
- * be overkill for smp_mb_acquire() and smp_mb_release().
- */
-#ifndef smp_mb
-#define smp_mb()           __sync_synchronize()
-#endif
-
-#ifndef smp_mb_acquire
-#define smp_mb_acquire()   __sync_synchronize()
-#endif
-
-#ifndef smp_mb_release
-#define smp_mb_release()   __sync_synchronize()
-#endif
-
-#ifndef smp_read_barrier_depends
-#define smp_read_barrier_depends()   barrier()
-#endif
-
-#ifndef signal_barrier
-#define signal_barrier()    barrier()
-#endif
-
-/* These will only be atomic if the processor does the fetch or store
- * in a single issue memory operation
- */
-#define qatomic_read__nocheck(p)   (*(__typeof__(*(p)) volatile*) (p))
-#define qatomic_set__nocheck(p, i) ((*(__typeof__(*(p)) volatile*) (p)) = (i))
-
-#define qatomic_read(ptr)       qatomic_read__nocheck(ptr)
-#define qatomic_set(ptr, i)     qatomic_set__nocheck(ptr,i)
-
-/**
- * qatomic_rcu_read - reads a RCU-protected pointer to a local variable
- * into a RCU read-side critical section. The pointer can later be safely
- * dereferenced within the critical section.
- *
- * This ensures that the pointer copy is invariant thorough the whole critical
- * section.
- *
- * Inserts memory barriers on architectures that require them (currently only
- * Alpha) and documents which pointers are protected by RCU.
- *
- * qatomic_rcu_read also includes a compiler barrier to ensure that
- * value-speculative optimizations (e.g. VSS: Value Speculation
- * Scheduling) does not perform the data read before the pointer read
- * by speculating the value of the pointer.
- *
- * Should match qatomic_rcu_set(), qatomic_xchg(), qatomic_cmpxchg().
- */
-#define qatomic_rcu_read(ptr)    ({               \
-    typeof(*ptr) _val = qatomic_read(ptr);        \
-    smp_read_barrier_depends();                   \
-    _val;                                         \
-})
-
-/**
- * qatomic_rcu_set - assigns (publicizes) a pointer to a new data structure
- * meant to be read by RCU read-side critical sections.
- *
- * Documents which pointers will be dereferenced by RCU read-side critical
- * sections and adds the required memory barriers on architectures requiring
- * them. It also makes sure the compiler does not reorder code initializing the
- * data structure before its publication.
- *
- * Should match qatomic_rcu_read().
- */
-#define qatomic_rcu_set(ptr, i)  do {             \
-    smp_wmb();                                    \
-    qatomic_set(ptr, i);                          \
-} while (0)
-
-#define qatomic_load_acquire(ptr)    ({     \
-    typeof(*ptr) _val = qatomic_read(ptr);  \
-    smp_mb_acquire();                       \
-    _val;                                   \
-})
-
-#define qatomic_store_release(ptr, i)  do { \
-    smp_mb_release();                       \
-    qatomic_set(ptr, i);                    \
-} while (0)
-
-#ifndef qatomic_xchg
-#if defined(__clang__)
-#define qatomic_xchg(ptr, i)    __sync_swap(ptr, i)
-#else
-/* __sync_lock_test_and_set() is documented to be an acquire barrier only.  */
-#define qatomic_xchg(ptr, i)    (smp_mb(), __sync_lock_test_and_set(ptr, i))
-#endif
-#endif
-#define qatomic_xchg__nocheck  qatomic_xchg
-
-/* Provide shorter names for GCC atomic builtins.  */
-#define qatomic_fetch_inc(ptr)  __sync_fetch_and_add(ptr, 1)
-#define qatomic_fetch_dec(ptr)  __sync_fetch_and_add(ptr, -1)
-
-#define qatomic_fetch_add(ptr, n) __sync_fetch_and_add(ptr, n)
-#define qatomic_fetch_sub(ptr, n) __sync_fetch_and_sub(ptr, n)
-#define qatomic_fetch_and(ptr, n) __sync_fetch_and_and(ptr, n)
-#define qatomic_fetch_or(ptr, n) __sync_fetch_and_or(ptr, n)
-#define qatomic_fetch_xor(ptr, n) __sync_fetch_and_xor(ptr, n)
-
-#define qatomic_inc_fetch(ptr)  __sync_add_and_fetch(ptr, 1)
-#define qatomic_dec_fetch(ptr)  __sync_add_and_fetch(ptr, -1)
-#define qatomic_add_fetch(ptr, n) __sync_add_and_fetch(ptr, n)
-#define qatomic_sub_fetch(ptr, n) __sync_sub_and_fetch(ptr, n)
-#define qatomic_and_fetch(ptr, n) __sync_and_and_fetch(ptr, n)
-#define qatomic_or_fetch(ptr, n) __sync_or_and_fetch(ptr, n)
-#define qatomic_xor_fetch(ptr, n) __sync_xor_and_fetch(ptr, n)
-
-#define qatomic_cmpxchg(ptr, old, new) \
-    __sync_val_compare_and_swap(ptr, old, new)
-#define qatomic_cmpxchg__nocheck(ptr, old, new)  qatomic_cmpxchg(ptr, old, new)
-
-/* And even shorter names that return void.  */
-#define qatomic_inc(ptr)        ((void) __sync_fetch_and_add(ptr, 1))
-#define qatomic_dec(ptr)        ((void) __sync_fetch_and_add(ptr, -1))
-#define qatomic_add(ptr, n)     ((void) __sync_fetch_and_add(ptr, n))
-#define qatomic_sub(ptr, n)     ((void) __sync_fetch_and_sub(ptr, n))
-#define qatomic_and(ptr, n)     ((void) __sync_fetch_and_and(ptr, n))
-#define qatomic_or(ptr, n)      ((void) __sync_fetch_and_or(ptr, n))
-#define qatomic_xor(ptr, n)     ((void) __sync_fetch_and_xor(ptr, n))
-
-#endif /* __ATOMIC_RELAXED */
-
-#ifndef smp_wmb
 #define smp_wmb()   smp_mb_release()
-#endif
-#ifndef smp_rmb
 #define smp_rmb()   smp_mb_acquire()
-#endif
-
-/* This is more efficient than a store plus a fence.  */
-#if !defined(__SANITIZE_THREAD__)
-#if defined(__i386__) || defined(__x86_64__) || defined(__s390x__)
-#define qatomic_mb_set(ptr, i)  ((void)qatomic_xchg(ptr, i))
-#endif
-#endif
 
 /* qatomic_mb_read/set semantics map Java volatile variables. They are
  * less expensive on some platforms (notably POWER) than fully
@@ -402,16 +218,16 @@
  * use. See docs/devel/atomics.rst for more discussion.
  */
 
-#ifndef qatomic_mb_read
 #define qatomic_mb_read(ptr)                             \
     qatomic_load_acquire(ptr)
-#endif
 
-#ifndef qatomic_mb_set
-#define qatomic_mb_set(ptr, i)  do {                    \
-    qatomic_store_release(ptr, i);                      \
-    smp_mb();                                           \
-} while(0)
+#if !defined(__SANITIZE_THREAD__) && \
+    (defined(__i386__) || defined(__x86_64__) || defined(__s390x__))
+/* This is more efficient than a store plus a fence.  */
+# define qatomic_mb_set(ptr, i)  ((void)qatomic_xchg(ptr, i))
+#else
+# define qatomic_mb_set(ptr, i) \
+   ({ qatomic_store_release(ptr, i); smp_mb(); })
 #endif
 
 #define qatomic_fetch_inc_nonzero(ptr) ({                               \
-- 
2.25.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]